Coarse-grained model of the J-integral of carbon nanotube reinforced polymer composites

Abstract The J-integral is recognized as a fundamental parameter in fracture mechanics that characterizes the inherent resistance of materials to crack growth. However, the conventional methods to calculate the J-integral, which require knowledge of the exact position of a crack tip and the continuum fields around it, are unable to precisely measure the J-integral of polymer composites at the nanoscale. This work aims to propose an effective calculation method based on coarse-grained (CG) simulations for predicting the J-integral of carbon nanotube (CNT)/polymer composites. In the proposed approach, the J-integral is determined from the load displacement curve of a single specimen. The distinguishing feature of the method is the calculation of J-integral without need of information about the crack tip, which makes it applicable to complex polymer systems. The effects of the CNT weight fraction and covalent cross-links between the polymer matrix and nanotubes, and polymer chains on the fracture behavior of the composites are studied in detail. The dependence of the J-integral on the crack length and the size of representative volume element (RVE) is also explored.

[1]  Dirk Reith,et al.  Mapping Atomistic to Coarse-Grained Polymer Models Using Automatic Simplex Optimization to Fit Structural Properties , 2001 .

[2]  Timon Rabczuk,et al.  A coarse-grained model for the elastic properties of cross linked short carbon nanotube/polymer composites , 2016, 1704.01451.

[3]  Ted Belytschko,et al.  Coupled quantum mechanical/molecular mechanical modeling of the fracture of defective carbon nanotubes and graphene sheets , 2007 .

[4]  Boris Polyak.  The conjugate gradient method in extremal problems , 1969 .

[5]  S. Keten,et al.  A coarse-grained model for the mechanical behavior of multi-layer graphene , 2015 .

[6]  Y. G. Xu,et al.  Molecular dynamics calculation of the J-integral fracture criterion for nano-sized crystals , 2004 .

[7]  Gregory M. Odegard,et al.  Modeling of the mechanical properties of nanoparticle/polymer composites , 2005 .

[8]  T. Rabczuk,et al.  A theoretical analysis of cohesive energy between carbon nanotubes, graphene and substrates , 2013 .

[9]  Michael Griebel,et al.  Molecular Simulation of the Influence of Chemical Cross-Links on the Shear Strength of Carbon Nanotube-Polymer Interfaces , 2002 .

[10]  F. Ramsteiner,et al.  J-Fracture toughness of polymers at slow speed , 2001 .

[11]  Wanlin Guo,et al.  Three-parameter approach for elastic–plastic fracture of the semi-elliptical surface crack under tension , 2008 .

[12]  Kurt Kremer,et al.  Coarse-Grained Polymer Melts Based on Isolated Atomistic Chains: Simulation of Polystyrene of Different Tacticities , 2009 .

[13]  F. Yuan,et al.  Atomistic simulations of J-integral in 2D graphene nanosystems. , 2005, Journal of nanoscience and nanotechnology.

[14]  Timon Rabczuk,et al.  Coarse-grained potentials of single-walled carbon nanotubes , 2014 .

[15]  V. Varadan,et al.  Mechanical properties of carbon nanotube/polymer composites , 2014, Scientific Reports.

[16]  R. Jones,et al.  The application of an atomistic J-integral to a ductile crack , 2013, Journal of physics. Condensed matter : an Institute of Physics journal.

[17]  J. Velasco,et al.  Fracture Toughness of Polypropylene-Based Particulate Composites , 2009, Materials.

[18]  H. Berendsen,et al.  Molecular dynamics with coupling to an external bath , 1984 .

[19]  T Belytschko,et al.  An atomistic J-integral at finite temperature based on Hardy estimates of continuum fields , 2010, Journal of physics. Condensed matter : an Institute of Physics journal.

[20]  R. Batra,et al.  Single-edge crack growth in graphene sheets under tension , 2013 .

[21]  John R. Rice,et al.  Some further results of J-integral analysis and estimates. , 1973 .

[22]  Timon Rabczuk,et al.  Abaqus implementation of phase-field model for brittle fracture , 2015 .

[23]  M. Griebel,et al.  Molecular dynamics simulations of the in uence of chemical cross-links on the elastic moduli of polymer-carbon nanotube composites , 2005 .

[24]  Dirk Reith,et al.  Deriving effective mesoscale potentials from atomistic simulations , 2002, J. Comput. Chem..

[25]  Timon Rabczuk,et al.  Mechanical properties of carbon nanotube reinforced polymer nanocomposites: A coarse-grained model , 2015, 1704.06706.

[26]  R. Vaia,et al.  Effect of polymer–nanoparticle interactions on the glass transition dynamics and the conductivity mechanism in polyurethane titanium dioxide nanocomposites , 2012 .

[27]  Chuan-yao Chen,et al.  Quasicontinuum simulation of single crystal nano-plate with a mixed-mode crack , 2009 .

[28]  Ho-Cheol Kim,et al.  Nanoscale effects leading to non-Einstein-like decrease in viscosity , 2003, Nature materials.

[29]  T. Anderson,et al.  Fracture mechanics - Fundamentals and applications , 2017 .

[30]  Christoph Unterweger,et al.  Synthetic fibers and thermoplastic short‐fiber‐reinforced polymers: Properties and characterization , 2014 .

[31]  R. Jones,et al.  The construction and application of an atomistic J-integral via Hardy estimates of continuum fields , 2010 .

[32]  N. Aluru,et al.  Crosslinking PMMA: Molecular dynamics investigation of the shear response , 2014 .

[33]  Timon Rabczuk,et al.  Tensile fracture behavior of short carbon nanotube reinforced polymer composites: A coarse-grained model , 2015 .

[34]  T. Rabczuk,et al.  Binding energy and mechanical stability of two parallel and crossing carbon nanotubes , 2015, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[35]  H. C. Andersen.  Molecular dynamics simulations at constant pressure and/or temperature , 1980 .

[36]  Y. Mai,et al.  Essential work of fracture and j‐integral measurements for ductile polymers , 1991 .

[37]  F. Yuan,et al.  Nanoscopic modeling of fracture of 2D graphene systems. , 2005, Journal of nanoscience and nanotechnology.

[38]  T. Takeda,et al.  Fracture behaviour of cracked carbon nanotube‐based polymer composites: Experiments and finite element simulations , 2010 .

[39]  Junhua Zhao,et al.  Three-parameter approach for elastic–plastic stress field of an embedded elliptical crack , 2009 .