Model-based automatic tuning of a filtration control system for submerged anaerobic membrane bioreactors (AnMBR)

Abstract This paper describes a model-based method to optimise filtration in submerged AnMBRs. The method is applied to an advanced knowledge-based control system and considers three statistical methods: (1) sensitivity analysis (Morris screening method) to identify an input subset for the advanced controller; (2) Monte Carlo method (trajectory-based random sampling) to find suitable initial values for the control inputs; and (3) optimisation algorithm (performing as a supervisory controller) to re-calibrate these control inputs in order to minimise plant operating costs. The model-based supervisory controller proposed allowed filtration to be optimised with low computational demands (about 5 min). Energy savings of up to 25% were achieved when using gas sparging to scour membranes. Downtime for physical cleaning was about 2.4% of operating time. The operating cost of the AnMBR system after implementing the proposed supervisory controller was about €0.045/m 3 , 53.3% of which were energy costs.

[1]  Andrea Saltelli,et al.  An effective screening design for sensitivity analysis of large models , 2007, Environ. Model. Softw..

[2]  José Ferrer,et al.  An improved sampling strategy based on trajectory design for application of the Morris method to systems with many input factors , 2012, Environ. Model. Softw..

[3]  Xavier Flores-Alsina,et al.  Multiple-objective evaluation of wastewater treatment plant control alternatives. , 2010, Journal of environmental management.

[4]  Hèctor Monclús,et al.  Development of a control algorithm for air‐scour reduction in membrane bioreactors for wastewater treatment , 2011 .

[5]  Gavin Towler,et al.  Chemical engineering design : principles, practice, and economics of plant and process design , 2008 .

[6]  Ignasi Rodríguez-Roda,et al.  Automatic control systems for submerged membrane bioreactors: a state-of-the-art review. , 2012, Water research.

[7]  José Ferrer,et al.  Advanced control system for optimal filtration in submerged anaerobic MBRs (SAnMBRs) , 2013 .

[8]  David Fairley,et al.  Robust Regression: Analysis and Applications , 1991 .

[9]  Simon Judd,et al.  The cost of a large-scale hollow fibre MBR. , 2010, Water research.

[10]  I Rodríguez-Roda,et al.  A knowledge-based control system for air-scour optimisation in membrane bioreactors. , 2011, Water science and technology : a journal of the International Association on Water Pollution Research.

[11]  Stefano Tarantola,et al.  Sensitivity Analysis in Practice: A Guide to Assessing Scientific Models , 2004 .

[12]  J Ferrer,et al.  Application of the Morris method for screening the influential parameters of fuzzy controllers applied to wastewater treatment plants. , 2011, Water science and technology : a journal of the International Association on Water Pollution Research.

[13]  Aileen N.L. Ng,et al.  A mini-review of modeling studies on membrane bioreactor (MBR) treatment for municipal wastewaters , 2007 .

[14]  Thomas F. Coleman,et al.  An Interior Trust Region Approach for Nonlinear Minimization Subject to Bounds , 1993, SIAM J. Optim..

[15]  Ramón Vilanova,et al.  Improving the performance of a WWTP control system by model-based setpoint optimisation , 2011, Environ. Model. Softw..

[16]  Jürgen Linseisen,et al.  THE INTERIOR , 2010 .

[17]  Giorgio Mannina,et al.  An integrated model for biological and physical process simulation in membrane bioreactors (MBRs) , 2011 .

[18]  Gürkan Sin,et al.  A systematic approach for fine-tuning of fuzzy controllers applied to WWTPs , 2010, Environ. Model. Softw..

[19]  Ludo Diels,et al.  Validation of a supervisory control system for energy savings in membrane bioreactors. , 2011, Water research.

[20]  Hèctor Monclús,et al.  Automatic control system for energy optimization in membrane bioreactors , 2011 .

[21]  Marc B. Neumann,et al.  Global sensitivity analysis in wastewater applications: A comprehensive comparison of different methods , 2013, Environ. Model. Softw..

[22]  Günter Wozny,et al.  Improving the efficiency of membrane bioreactors by a novel model-based control of membrane filtration , 2007 .

[23]  Jean-Philippe Steyer,et al.  Optimization of WWTP control by means of multi-objective genetic algorithms and sensitivity analysis , 2008 .

[24]  I Nopens,et al.  Critical review of membrane bioreactor models--part 1: biokinetic and filtration models. , 2012, Bioresource technology.

[25]  Max D. Morris,et al.  Factorial sampling plans for preliminary computational experiments , 1991 .

[26]  J Ribes,et al.  Application of the general model ‘Biological Nutrient Removal Model No. 1’ to upgrade two full-scale WWTPs , 2012, Environmental technology.

[27]  Sylvie Gillot,et al.  The COST Simulation Benchmark: Description and Simulator Manual , 2001 .

[28]  Marc B. Neumann,et al.  Biological nitrogen and phosphorus removal in membrane bioreactors: model development and parameter estimation , 2013, Bioprocess and Biosystems Engineering.

[29]  E. Brauns,et al.  A new method for the evaluation of the reversible and irreversible fouling propensity of MBR mixed liquor , 2008 .

[30]  M. V. Ruano,et al.  Factors that affect the permeability of commercial hollow-fibre membranes in a submerged anaerobic MBR (HF-SAnMBR) system. , 2013, Water research.

[31]  Ingmar Nopens,et al.  BSM-MBR: a benchmark simulation model to compare control and operational strategies for membrane bioreactors. , 2011, Water research.

[32]  A. Robles,et al.  Global sensitivity analysis of a filtration model for submerged anaerobic membrane bioreactors (AnMBR). , 2014, Bioresource technology.

[33]  F Cecchi,et al.  Application of the IWA ADM1 model to simulate anaerobic co-digestion of organic waste with waste activated sludge in mesophilic condition. , 2009, Bioresource technology.

[34]  Mircea Vasile Cristea,et al.  Development and economic assessment of different WWTP control strategies for optimal simultaneous removal of carbon, nitrogen and phosphorus , 2013, Comput. Chem. Eng..

[35]  Abdolhamid Salahi,et al.  Experimental investigation, modeling and optimization of membrane separation using artificial neural network and multi-objective optimization using genetic algorithm , 2013 .

[36]  Giorgio Mannina,et al.  The fouling phenomenon in membrane bioreactors: Assessment of different strategies for energy saving , 2013 .

[37]  Krist V. Gernaey,et al.  Improving the Morris method for sensitivity analysis by scaling the elementary effects , 2009 .

[38]  Harvey Arellano-Garcia,et al.  Model-based recognition of fouling mechanisms in membrane bioreactors , 2009 .

[39]  J Comas,et al.  Assessment of energy-saving strategies and operational costs in full-scale membrane bioreactors. , 2014, Journal of environmental management.

[40]  J. J. Morenilla,et al.  Calibration and simulation of two large wastewater treatment plants operated for nutrient removal. , 2004, Water science and technology : a journal of the International Association on Water Pollution Research.

[41]  Simon Judd,et al.  The MBR Book: Principles and Applications of Membrane Bioreactors for Water and Wastewater Treatment , 2006 .

[42]  Wolfgang Marquardt,et al.  Run‐to‐run control of membrane filtration processes , 2007 .

[43]  G. G. Stokes.  "J." , 1890, The New Yale Book of Quotations.

[44]  Tore Hägglund,et al.  Automatic Tuning and Adaptation for PID Controllers - A Survey , 1992 .

[45]  Gürkan Sin,et al.  Multi-criteria evaluation of wastewater treatment plant control strategies under uncertainty. , 2008, Water research.

[46]  Juan A. Baeza,et al.  Multi-criteria selection of optimum WWTP control setpoints based on microbiology-related failures, effluent quality and operating costs , 2012 .

[47]  José Ferrer,et al.  A filtration model applied to submerged anaerobic MBRs (SAnMBRs) , 2013 .

[48]  Bernard De Baets,et al.  Multi-criteria analysis of wastewater treatment plant design and control scenarios under uncertainty , 2010, Environ. Model. Softw..

[49]  C. Lévi-Strauss,et al.  Experimental investigation , 2013 .