Non-autoclave processing of honeycomb sandwich structures: Skin through thickness air permeability during cure

In non-autoclave processing of sandwich structures, the pressure level inside the honeycomb becomes a critical process parameter, which depends on the permeability to air of the upper skin. In this work, prepreg and adhesive permeabilities were determined separately and in combination through a falling pressure method. We showed that a range of initial skin through thickness air permeability could be achieved by perforating the prepreg plies, the adhesive layer or a combination of both. A corresponding range of achievable pressure was measured inside the honeycomb. The change in the through thickness permeability with time during the cure cycle was determined for each of the studied cases. The adhesive layer was identified as the element that most reduces the initial through thickness air permeability in skin manufacturing.

[1]  J. Månson,et al.  Influence of Process Pressure on Local Facesheet Instability for Ultra-light Sandwich Structures , 2009 .

[2]  M. Kortschot,et al.  The role of the resin fillet in the delamination of honeycomb sandwich structures , 2002 .

[3]  D. Stonestrom,et al.  Air permeability and trapped‐air content in two soils , 1989 .

[4]  J. Seferis,et al.  Prepreg gas permeation as a function of fiber orientation and aging time , 1995 .

[5]  J. R. Wood,et al.  Modelling the behaviour of gas bubbles in an epoxy resin: Evaluating the input parameters for a diffusion model using a free-volume approach , 1995 .

[6]  Jan-Anders E. Månson,et al.  Through thickness air permeability of prepregs during cure , 2009 .

[7]  Jan-Anders E. Månson,et al.  Vacuum bag processing of large composite structures for America's Cup class boats , 2003 .

[8]  Arthur L. Baehr,et al.  Evaluation of Unsaturated Zone Air Permeability Through Pneumatic Tests , 1991 .

[9]  Roberts Joffe,et al.  Effect of voids on failure mechanisms in RTM laminates , 1995 .

[10]  H. V. Groenewoud.  METHODS AND APPARATUS FOR MEASURING AIR PERMEABILITY OF THE SOIL , 1968 .

[11]  I. Daniel,et al.  A gas flow method for determination of in‐plane permeability of fiber preforms , 2001 .

[12]  Alfred C. Loos,et al.  The Effects of Fluid Type and Viscosity on the Steady-State and Advancing Front Permeability Behavior of Textile Preforms , 1997 .

[13]  J. Kardos,et al.  Resin flow through fiber beds during composite manufacturing processes. Part II: Numerical and experimental studies of newtonian flow through ideal and actual fiber beds , 1992 .

[14]  J. Gillespie,et al.  Measurement of transverse permeability using gaseous and liquid flow , 2007 .

[15]  G. Ampt,et al.  Studies on Soil Physics: Part II — The Permeability of an Ideal Soil to Air and Water , 1912, The Journal of Agricultural Science.

[16]  A. Baker,et al.  Composite Materials for Aircraft Structures , 2004 .

[17]  J. Jiao,et al.  A falling-pressure method for measuring air permeability of asphalt in laboratory , 2004 .

[18]  David S. Springer,et al.  Air Permeability of Porous Materials Under Controlled Laboratory Conditions , 1998 .

[19]  J. L. Kardos,et al.  Void growth and resin transport during processing of thermosetting — Matrix composites , 1986 .

[20]  J. Bear.  Dynamics of Fluids in Porous Media , 1975 .

[21]  R. Reid,et al.  The Properties of Gases and Liquids , 1977 .

[22]  Richard S. Parnas,et al.  A permeability database for composites manufacturing , 1997 .

[23]  Z. Sun,et al.  A simple method for the measurement of compaction and corresponding transverse permeability of composite prepregs , 2007 .

[24]  V. Michaud,et al.  Low Pressure Processing Of High Fiber Content Composites , 2006 .

[25]  Kicki F. Karlsson,et al.  Manufacturing and applications of structural sandwich components , 1997 .

[26]  John W. Gillespie,et al.  Moisture diffusion in epoxy systems , 1999 .

[27]  Suresh G. Advani,et al.  Process Modeling in Composites Manufacturing , 2004 .

[28]  J. Seferis,et al.  Prepreg process-structure-property analoysis and scale-up for manufacturing and performance , 1996 .

[29]  Polycarpos Pissis,et al.  Water sorption and diffusion studies in an epoxy resin system , 1999 .

[30]  Yu Wang,et al.  Measurement of permeability of continuous filament mat glass–fibre reinforcements by saturated radial airflow , 2007 .

[31]  V. Michaud,et al.  Vacuum-bag processing of sandwich structures: role of honeycomb pressure level on skin-core adhesion and skin quality , 2010 .

[32]  E. Douglas,et al.  Water vapor transport in liquid crystalline and non-liquid crystalline epoxies , 2004 .

[33]  Ronald W. Falta,et al.  Analytical solutions for steady state gas flow to a soil vapor extraction well , 1992 .

[34]  G. W. C. Kaye,et al.  Tables of Physical and Chemical Constants, and some Mathematical Functions , 1921, Nature.

[35]  Yifu Ding,et al.  Contributions of the Side Groups to the Characteristics of Water Absorption in Cured Epoxy Resins , 2001 .

[36]  Simon Bickerton,et al.  Compression flow permeability measurement: a continuous technique , 2003 .

[37]  A. Baker,et al.  Component Form and Manufacture , 2016, Composite Materials for Aircraft Structures, Third Edition.

[38]  I. Daniel,et al.  Determination of in‐plane permeability of fiber preforms by the gas flow method using pressure measurements , 2003 .

[39]  Adrian E. Scheidegger,et al.  The physics of flow through porous media , 1957 .

[40]  D. Zenkert,et al.  Handbook of Sandwich Construction , 1997 .

[41]  Kenneth J. Bowles,et al.  Void Effects on the Interlaminar Shear Strength of Unidirectional Graphite-Fiber-Reinforced Composites , 1992 .

[42]  J. Nam,et al.  Gas permeation and viscoelastic deformation of prepregs in composite manufacturing processes , 1995 .

[43]  C. Shan.  Analytical solutions for determining vertical air permeability in unsaturated soils. , 1995 .

[44]  C. Binetruy,et al.  Unidirectional compression of fibre reinforcements. Part 2: A continuous permeability tensor measurement , 2007 .

[45]  J. Seferis,et al.  Thermal and air permeation properties of a carbon fiber/toughened epoxy based prepreg system , 1997 .

[46]  F. C. Campbell,et al.  Porosity in carbon fiber composites an overview of causes , 1995 .