Lateral-torsional buckling of singly symmetric web-tapered thin-walled I-beams: 1D model vs. shell FEA

This paper assesses the global performance and the underlying assumptions of a recently developed one-dimensional model characterising the elastic lateral-torsional buckling behaviour of singly symmetric tapered thin-walled open beams, which is able to account for the influence of the pre-buckling deflections. A comparative study involving the critical load factors and buckling modes yielded by (i) the one-dimensional model and (ii) two-dimensional shell finite element analyses (reference results) is presented and discussed. The results concern I-section cantilevers and simply supported beams (i) with uniform or linearly tapered webs, (ii) equal or unequal uniform flanges and (iii) acted by point loads applied at the free end or mid-span sections, respectively. In general, the one-dimensional predictions are found to agree well with the shell finite element results. Some significant discrepancies are also recorded (for the shorter beams), which are due to the occurrence of relevant cross-section distortion or localised buckling phenomena.

[1]  Nicolas Boissonnade,et al.  A new beam finite element for tapered members , 2001 .

[2]  Stuart S. Antman,et al.  The Theory of Rods , 1973 .

[3]  Mark A. Bradford,et al.  Nonlinear analysis of thin-walled members of variable cross-section. Part II: Application , 2000 .

[4]  H. D. Wright.  Stability and Ductility of Steel Structures , 2000 .

[5]  J. Szpunar,et al.  Part II applications , 2003 .

[6]  D. A. Nethercot,et al.  Designer's guide to EN 1993-1-1 : Eurocode 3: Design of Steel Structures : General Rules and Rules for Buildings /L. Gardner and D. A. Nethercot , 2005 .

[7]  Peter Buffel.  Lateral torsional buckling of tapered beams , 2000 .

[8]  E. Bretscher.  Encyclopædia of Physics , 1958, Nature.

[9]  Dimos Polyzois,et al.  Lateral-Torsional Stability of Steel Web-Tapered I-Beams , 1998 .

[10]  Nicholas S. Trahair,et al.  Prebuckling Deflections and Lateral Buckling. I: Theory , 1992 .

[11]  Barna A. Szabó,et al.  Torsional Response of Tapered I-Girders , 1967 .

[12]  Dinar Camotim,et al.  Lateral-torsional buckling of prismatic and tapered thin-walled open beams: assessing the influence of pre-buckling deflections , 2004 .

[13]  Mark A. Bradford,et al.  Elastic buckling of tapered monosymmetric I-beams , 1988 .

[14]  A W Beeby,et al.  CONCISE EUROCODE FOR THE DESIGN OF CONCRETE BUILDINGS. BASED ON BSI PUBLICATION DD ENV 1992-1-1: 1992. EUROCODE 2: DESIGN OF CONCRETE STRUCTURES. PART 1: GENERAL RULES AND RULES FOR BUILDINGS , 1993 .

[15]  S. Mikhlin,et al.  Variational Methods in Mathematical Physics , 1965 .

[16]  I. Hlavácek,et al.  Mathematical Theory of Elastic and Elasto Plastic Bodies: An Introduction , 1981 .

[17]  K. Bathe.  Finite Element Procedures , 1995 .

[18]  P. G. Ciarlet,et al.  Three-dimensional elasticity , 1988 .

[19]  Stefano Caramelli,et al.  Lateral torsional buckling in steel and composite beams , 2002 .

[20]  Z. Bažant,et al.  Stability of Structures: Elastic, Inelastic, Fracture, and Damage Theories , 1993 .

[21]  Mark A. Bradford,et al.  A rational model for the distortional buckling of tapered members , 1996 .

[22]  Dinar Camotim,et al.  Lateral–Torsional Buckling of Singly Symmetric Tapered Beams: Theory and Applications , 2005 .

[23]  J. D. Yau,et al.  Stability of Beams with Tapered I‐Sections , 1987 .

[24]  Philippe G. Ciarlet,et al.  Theory of Shells , 2000 .

[25]  Nicholas S. Trahair,et al.  PREBUCKLING DEFLECTIONS AND LATERAL BUCKLING. II: APPLICATIONS , 1992 .