The enhanced structure stability and the reinforcement mechanism of 0.1Al2O3-ZrO2 reinforced MoSi2 composite coating

[1]  Ke Yang,et al.  In-situ synthesis of MoSi2 coating on Mo substrate under carbon protection and its short-term oxidation behavior , 2018, Surface and Coatings Technology.

[2]  H. Jianfeng,et al.  Self-healing ZrB2–SiO2 oxidation resistance coating for SiC coated carbon/carbon composites , 2016 .

[3]  Dezhi Wang,et al.  Preparation and characterization of MoSi2/MoB composite coating on Mo substrate , 2014 .

[4]  Xinghong Zhang,et al.  Effects of oxygen partial pressure and atomic oxygen on the microstructure of oxide scale of ZrB2–SiC composites at 1500 °C , 2013 .

[5]  S. Majumdar.  Formation of MoSi2 and Al doped MoSi2 coatings on molybdenum base TZM (Mo–0.5Ti–0.1Zr–0.02C) alloy , 2012 .

[6]  A. K. Suri,et al.  Development of silicide coating over molybdenum based refractory alloy and its characterization , 2010 .

[7]  B. Venkataraman,et al.  MoSi2 coating on Mo substrate for short-term oxidation protection in air , 2009 .

[8]  T. Ahrens,et al.  Shock compression of preheated molybdenum to 300 GPa , 2009 .

[9]  Jiecai Han,et al.  Oxidation-resistant ZrB2-SiC composites at 2200 °C , 2008 .

[10]  R. Telle,et al.  Thermal stability of zircon (ZrSiO4) , 2008 .

[11]  K. Ciuffi,et al.  Nonhydrolytic sol-gel synthesis and characterization of YAG , 2007 .

[12]  S. Suib,et al.  Formation of MoSi2–SiO2 coatings on molybdenum substrates by CVD/MOCVD , 2006 .

[13]  J. Han,et al.  Low-temperature cyclic oxidation behavior of MoSi2/Si3N4 nanocomposite coating formed on Mo substrate at 773 K , 2005 .

[14]  I. Shon,et al.  One step synthesis of dense MoSi2–SiC composite by high-frequency induction heated combustion and its mechanical properties , 2005 .

[15]  T. Ahrens,et al.  Shock-wave equation of state of molten and solid fayalite , 2002 .

[16]  R. Suzuki,et al.  MoSi2 coating on molybdenum using molten salt , 2000 .

[17]  T. Maruyama,et al.  High temperature oxidation and pesting of Mo(Si,Al)2 , 1997 .

[18]  K. Upadhya,et al.  Advanced Materials for Ultrahigh Temperature Structural Applications Above 2000 deg C , 1997 .

[19]  A. Vioux,et al.  Nonhydrolytic Sol−Gel Process: Aluminum Titanate Gels , 1997 .

[20]  T. Maruyama,et al.  The role of microstructure on pesting during oxidation of MoSi2 and Mo(Si,Al)2 at 773 K , 1997 .

[21]  B. Mishra,et al.  Synthesis of molybdenum disilicide on molybdenum substrates , 1995 .

[22]  T. Ahrens,et al.  Dynamic response of molybdenum shock compressed at 1400°C , 1994 .