Interface circuit for resistive sensors utilizing digital potentiometers

In this paper an interface for resistive sensors in a bridge configuration is investigated. The interface utilizes digital potentiometers in order to implement an automatic calibration procedure for the bridge circuit offset. Such an approach facilitates the use of digital signal processing with high flexibility; advantageous in modern instrumentation systems. Commercial digital potentiometers have a very limited resistance range and therefore this method to overcome the discrete nominal resistance values was developed. The system was simulated mathematically and automatic calibration of the offset voltage was demonstrated with a prototype. An important additional advantage was an increase in resolution compared to a simple potentiometer circuit.

[1]  Wouter Bracke.  Generic Architectures and Design Methods for Autonomous Sensors (Generische architecturen en ontwerpmethodes voor autonome sensoren) , 2006 .

[2]  David A. Bradley,et al.  Built-in self-test and diagnostic support for safety critical microsystems , 1996 .

[3]  R. Buchhold,et al.  Design studies on piezoresistive humidity sensors , 1998 .

[4]  Per Ohlckers,et al.  Effects of process variations in a CMOS circuit for temperature compensation of piezoresistive pressure sensors , 1995 .

[5]  Makoto Ishida,et al.  A three-axis accelerometer for high temperatures with low temperature dependence using a constant temperature control of SOI piezoresistors , 2003, The Sixteenth Annual International Conference on Micro Electro Mechanical Systems, 2003. MEMS-03 Kyoto. IEEE.

[6]  D. J. Yonce,et al.  A DC autonulling bridge for real-time resistance measurement , 2000 .

[7]  Hiranmay Saha,et al.  Temperature compensation of piezoresistive micro-machined porous silicon pressure sensor by ANN , 2006, Microelectron. Reliab..

[8]  Cheng Gui Hou.  A pressure sensor made of two piezoresistive bridges , 1996, Quality Measurement: The Indispensable Bridge between Theory and Reality (No Measurements? No Science! Joint Conference - 1996: IEEE Instrumentation and Measurement Technology Conference and IMEKO Tec.

[9]  Bedrich J. Hosticka,et al.  A CMOS piezoresistive pressure sensor with on-chip programming and calibration , 1993, 1993 IEEE International Solid-State Circuits Conference Digest of Technical Papers.

[10]  Alexander Sutor,et al.  New CMOS-compatible mechanical shear stress sensor , 2001 .

[11]  Joerg Sorber,et al.  Hydrogel-based piezoresistive pH sensors: Design, simulation and output characteristics , 2006 .