Globally Optimal Matching Networks With Lossy Passives and Efficiency Bounds

Impedance transformation is one of the central concepts in high-frequency circuits and systems and is used ubiquitously for optimal power matching, noise matching, and high-efficiency power delivery to the antenna by power amplifiers. The matching network can be generally expressed as a path on the Smith chart and given the load and source impedances, there are theoretically infinite ways to achieve the transformation. When losses are included, each path will encounter a different loss, and currently, no comprehensive theory exist for finding the most optimal matching network. Furthermore, the networks will also provide different bandwidths of operation. Due to the matching network losses, it is often not optimal to force conjugate matching for maximizing end-to-end power transfer efficiency. In this paper, we provide a method toward finding 1) the globally most efficient path between two arbitrary impedances with lossy passives; 2) given the source and the load impedances, the optimal (typically non-conjugate) impedance to match and the highest efficiency path to reach the impedance; and 3) upper bounds on achievable efficiencies under the various scenarios. This paper also proposes ways to combine this method with nonlinear load-pull simulations for optimal combiner and matching network for integrated power amplifiers. This analysis creates interesting ways to maximize efficiency and bandwidths simultaneously and the paper also discusses this joint optimization. To the best of our knowledge, this is the first comprehensive analysis of globally optimal impedance transformation networks between arbitrary impedances with lossy passives.

[1]  Kaushik Sengupta,et al.  On-chip sensing and actuation methods for integrated self-healing mm-wave CMOS power amplifier , 2012, 2012 IEEE/MTT-S International Microwave Symposium Digest.

[2]  R. Fano.  Theoretical limitations on the broadband matching of arbitrary impedances , 1950 .

[3]  Hossein Hashemi,et al.  Performance Limits, Design and Implementation of mm-Wave SiGe HBT Class-E and Stacked Class-E Power Amplifiers , 2014, IEEE Journal of Solid-State Circuits.

[4]  Mark Thompson,et al.  Determination of the impedance matching domain of impedance matching networks , 2004, IEEE Transactions on Circuits and Systems I: Regular Papers.

[5]  Ali Hajimiri,et al.  Distributed active transformer-a new power-combining and impedance-transformation technique , 2002 .

[6]  Trung-Kien Nguyen,et al.  CMOS low-noise amplifier design optimization techniques , 2004, IEEE Transactions on Microwave Theory and Techniques.

[7]  Kaushik Sengupta,et al.  A compact self-similar power combining topology , 2010, 2010 IEEE MTT-S International Microwave Symposium.

[8]  Kaushik Sengupta,et al.  A W-band SiGe power amplifier with Psat of 23 dBm and PAE of 16.8% at 95GHz , 2017, 2017 IEEE MTT-S International Microwave Symposium (IMS).

[9]  Zhu Lizhong,et al.  Lumped lossy circuit synthesis and its application in broad-band FET amplifier design in MMICs , 1989 .

[10]  Kaushik Sengupta,et al.  RF and mm-Wave Power Generation in Silicon , 2015 .

[11]  Peter M. Asbeck,et al.  Analysis and Design of Stacked-FET Millimeter-Wave Power Amplifiers , 2013, IEEE Transactions on Microwave Theory and Techniques.

[12]  Kaushik Sengupta,et al.  Methods for finding globally maximum-efficiency impedance matching networks with lossy passives , 2015, 2015 IEEE Custom Integrated Circuits Conference (CICC).

[13]  Hao Yu,et al.  Design and Analysis of CMOS-Based Terahertz Integrated Circuits by Causal Fractional-Order RLGC Transmission Line Model , 2013, IEEE Journal on Emerging and Selected Topics in Circuits and Systems.

[14]  Hao Yu,et al.  A 2-D Distributed Power Combining by Metamaterial-Based Zero Phase Shifter for 60-GHz Power Amplifier in 65-nm CMOS , 2013, IEEE Transactions on Microwave Theory and Techniques.

[15]  Kaushik Sengupta,et al.  A 19.1dBm segmented power-mixer based multi-Gbps mm-Wave transmitter in 32nm SOI CMOS , 2014, 2014 IEEE Radio Frequency Integrated Circuits Symposium.

[16]  A. V. D. Capelle,et al.  An impedance-matching technique for increasing the bandwidth of microstrip antennas , 1989 .

[17]  Kaushik Sengupta,et al.  Frequency Reconfigurable mm-Wave Power Amplifier With Active Impedance Synthesis in an Asymmetrical Non-Isolated Combiner: Analysis and Design , 2017, IEEE Journal of Solid-State Circuits.

[18]  Kaushik Sengupta,et al.  A digital mm-Wave PA architecture with Simultaneous Frequency and back-off Reconfigurability , 2017, 2017 IEEE Radio Frequency Integrated Circuits Symposium (RFIC).

[19]  W. H. Ku,et al.  Computer-Aided Synthesis of Lumped Lossy Matching Networks for Monolithic Microwave Integrated Circuits ( MMIC's) , 1984 .

[20]  Edsger W. Dijkstra,et al.  A note on two problems in connexion with graphs , 1959, Numerische Mathematik.

[21]  Sangwook Nam,et al.  Investigation of Adaptive Matching Methods for Near-Field Wireless Power Transfer , 2011, IEEE Transactions on Antennas and Propagation.

[22]  Kaushik Sengupta,et al.  A mm-Wave Segmented Power Mixer , 2015, IEEE Transactions on Microwave Theory and Techniques.

[23]  A. Hajimiri,et al.  A fully-integrated self-healing power amplifier , 2012, 2012 IEEE Radio Frequency Integrated Circuits Symposium.

[24]  D.J. Perreault,et al.  Analysis and Design of High Efficiency Matching Networks , 2006, IEEE Transactions on Power Electronics.

[25]  Kaushik Sengupta,et al.  20.2 A frequency-reconfigurable mm-Wave power amplifier with active-impedance synthesis in an asymmetrical non-isolated combiner , 2016, 2016 IEEE International Solid-State Circuits Conference (ISSCC).

[26]  A. Hajimiri,et al.  Integrated Self-Healing for mm-Wave Power Amplifiers , 2013, IEEE Transactions on Microwave Theory and Techniques.

[27]  E. Gilbert.  Impedance matching with lossy components , 1975 .

[28]  H. W. Bode,et al.  Network analysis and feedback amplifier design , 1945 .