Fabrication and laboratory-based performance testing of a building-integrated photovoltaic-thermal roofing panel

A building integrated photovoltaic-thermal (BIPVT) multifunctional roofing panel has been developed in this study to harvest solar energy in the form of PV electricity as well as heat energy through the collection of warm water. As a key component of the multifunctional building envelope, an aluminum/high-density polyethylene (HDPE) functionally graded material (FGM) panel embedded with aluminum water tubes has been fabricated through the vibration-sedimentation approach. The FGM layer gradually transits material phases from well-conductive side (with aluminum dominated) to another highly insulated side (with HDPE). The heat in the PV cells can be easily transferred into the conductive side of the FGM and then collected by the water flow in the embedded tubes. Therefore, the operational temperature of the PV cells can be significantly lowered down, which recovers the PV efficiency in hot weather. In this way, the developed BIPVT panel is able to efficiently harvest solar energy in the form of both PV electricity and heat. The performance of a prototype BIPVT panel has been evaluated in terms of its thermal efficiency via warm water collection and PV efficiency via the output electricity. The laboratory test results demonstrate that significant energy conversion efficiency improvement can be achieved for both electricity generation and heat collection by the presented BIPVT roofing system. Overall, the performance indicates a very promising prospective of the new BIPVT multifunctional roofing panel.

[1]  Jun-Gu Kang,et al.  Experimental Performance of Heating System with Building-integrated PVT (BIPVT) Collector , 2014 .

[3]  G. N. Tiwari,et al.  Optimizing the energy and exergy of building integrated photovoltaic thermal (BIPVT) systems under cold climatic conditions , 2010 .

[4]  G. N. Tiwari,et al.  Building Integrated Photovoltaic Thermal Systems: For Sustainable Developments , 2010 .

[5]  C. Gueymard,et al.  Spectral effects on the transmittance, solar heat gain, and performance rating of glazing systems , 2009 .

[6]  Kamaruzzaman Sopian,et al.  Efficiencies and improvement potential of building integrated photovoltaic thermal (BIPVT) system , 2014 .

[7]  Anil Kumar,et al.  Historical and recent development of photovoltaic thermal (PVT) technologies , 2015 .

[8]  Zifeng Yuan,et al.  Simulation and experimental validation of heat transfer in a novel hybrid solar panel , 2012 .

[9]  Andreas K. Athienitis,et al.  A Study of Design Options for a Building Integrated Photovoltaic/thermal (BIPV/T) System with Glazed Air Collector and Multiple Inlets , 2014 .

[10]  James K. Carson,et al.  Effect of flow distribution on the photovoltaic performance of a building integrated photovoltaic/thermal (BIPV/T) collector , 2012 .

[11]  Kamaruzzaman Sopian,et al.  Performance analysis of photovoltaic thermal (PVT) water collectors , 2014 .

[12]  Tin-Tai Chow,et al.  Photovoltaic-Thermal Collector System for Domestic Application , 2007 .

[13]  Jie Ji,et al.  A sensitivity study of a hybrid photovoltaic/thermal water-heating system with natural circulation , 2007 .

[14]  W. Beckman,et al.  Solar Engineering of Thermal Processes , 1985 .

[15]  Herricos Stapountzis,et al.  Energy analysis of an improved concept of integrated PV panels in an office building in central Greece , 2011 .

[16]  J. Garant,et al.  Design and performance of a novel building integrated PV/thermal system for energy efficiency of buildings , 2013 .

[17]  Tin-Tai Chow,et al.  A Review on Photovoltaic/Thermal Hybrid Solar Technology , 2010, Renewable Energy.

[18]  Kuan Chen,et al.  New developments in illumination, heating and cooling technologies for energy-efficient buildings , 2010 .

[19]  Young Tae Chae,et al.  Building energy performance evaluation of building integrated photovoltaic (BIPV) window with semi-transparent solar cells , 2014 .

[20]  G. N. Tiwari,et al.  Energy and exergy analysis of a building integrated semitransparent photovoltaic thermal (BISPVT) system , 2012 .

[21]  E. Skoplaki,et al.  ON THE TEMPERATURE DEPENDENCE OF PHOTOVOLTAIC MODULE ELECTRICAL PERFORMANCE: A REVIEW OF EFFICIENCY/ POWER CORRELATIONS , 2009 .

[22]  Ranko Goic,et al.  review of solar photovoltaic technologies , 2011 .

[23]  H. Yin,et al.  Energy Conversion Efficiency of a Novel Hybrid Solar System for Photovoltaic, Thermoelectric, and Heat Utilization , 2011, IEEE Transactions on Energy Conversion.

[24]  Bjørn Petter Jelle,et al.  Building integrated photovoltaic products: A state-of-the-art review and future research opportunities , 2012 .

[25]  Graham L. Morrison,et al.  Performance of a building integrated photovoltaic/thermal (BIPVT) solar collector , 2009 .

[26]  Tin-Tai Chow,et al.  An experimental study of façade-integrated photovoltaic/water-heating system , 2007 .

[27]  Bjørn Petter Jelle.  Building Integrated Photovoltaics: A Concise Description of the Current State of the Art and Possible Research Pathways , 2015 .

[28]  Wolfgang A. Kaysser,et al.  Functionally graded materials for sensor and energy applications , 2003 .

[29]  Bin-Juine Huang,et al.  PERFORMANCE EVALUATION OF SOLAR PHOTOVOLTAIC / THERMAL SYSTEMS , 2001 .

[30]  Thorsten Dullweber,et al.  Resistive Power Loss Analysis of PV Modules Made From Halved 15.6 × 15.6 cm2 Silicon PERC Solar Cells With Efficiencies up to 20.0% , 2015, IEEE Journal of Photovoltaics.

[31]  Jon Hand,et al.  Building-integrated photovoltaic and thermal applications in a subtropical hotel building , 2003 .

[32]  Po-Hua Lee,et al.  Size Effect on Functionally Graded Material Fabrication by Sedimentation , 2015 .

[33]  Andreas K. Athienitis,et al.  Modeling of energy performance of a house with three configurations of building-integrated photovoltaic/thermal systems , 2010 .

[34]  K. F. Fong,et al.  Annual performance of building-integrated photovoltaic/water-heating system for warm climate application , 2009 .

[35]  Saffa Riffat,et al.  Building integrated solar thermal collectors – A review , 2015 .

[36]  Andreas K. Athienitis,et al.  Experimental investigation of a two-inlet air-based building integrated photovoltaic/thermal (BIPV/T) system , 2015 .

[37]  Andreas K. Athienitis,et al.  A prototype photovoltaic/thermal system integrated with transpired collector , 2011 .

[38]  Zhiqiang John Zhai,et al.  Experimental and numerical investigation on thermal and electrical performance of a building integrated photovoltaic–thermal collector system , 2010 .

[39]  Bjørn Petter Jelle,et al.  State-of-the-art Building Integrated Photovoltaics , 2012 .

[40]  Arvind,et al.  A study on photovoltaic parameters of mono-crystalline silicon solar cell with cell temperature , 2015 .

[41]  Jayanta Deb Mondol,et al.  Modelling and simulation of Building-Integrated solar thermal systems: Behaviour of the coupled building/system configuration , 2015 .

[42]  B. Kieback,et al.  Processing techniques for functionally graded materials , 2003 .

[43]  Liangliang Sun,et al.  Optimum design of shading-type building-integrated photovoltaic claddings with different surface azimuth angles , 2012 .

[44]  Tin-Tai Chow,et al.  Hybrid photovoltaic and thermal solar-collector designed for natural circulation of water , 2006 .

[45]  Saffa Riffat,et al.  Experimental investigation of a building integrated photovoltaic/thermal roof collector combined with a liquid desiccant enhanced indirect evaporative cooling system , 2015 .

[46]  Katsunori Nagano,et al.  Development of thermal-photovoltaic hybrid exterior wallboards incorporating PV cells in and their winter performances , 2003 .

[47]  Kamaruzzaman Sopian,et al.  Recent advances in flat plate photovoltaic/thermal (PV/T) solar collectors , 2011 .