Three Dimensional Characterization of Tin Crystallography and Cu6Sn5 Intermetallics in Solder Joints by Multiscale Tomography

Decreasing pitch size in electronic packaging has resulted in a drastic decrease in solder volumes. The Sn grain crystallography and fraction of intermetallic compounds (IMCs) in small-scale solder joints evolve much differently at the smaller length scales. A cross-sectional study limits the morphological analysis of microstructural features to two dimensions. This study utilizes serial sectioning technique in conjunction with electron backscatter diffraction to investigate the crystallographic orientation of both Sn grains and Cu6Sn5 IMCs in Cu/Pure Sn/Cu solder joints in three dimensional (3D). Quantification of grain aspect ratio is affected by local cooling rate differences within the solder volume. Backscatter electron imaging and focused ion beam serial sectioning enabled the visualization of morphology of both nanosized Cu6Sn5 IMCs and the hollow hexagonal morphology type Cu6Sn5 IMCs in 3D. Quantification and visualization of microstructural features in 3D thus enable us to better understand the microstructure and deformation mechanics within these small scale solder joints.

[1]  N. Chawla,et al.  Electromigration mechanisms in Sn-0.7Cu/Cu couples by four dimensional (4D) X-ray microtomography and electron backscatter diffraction (EBSD) , 2016 .

[2]  Anthony D. Rollett,et al.  Computer simulation of recrystallization—III. Influence of a dispersion of fine particles , 1992 .

[3]  N. Chawla,et al.  Stochastic Multi-Scale Reconstruction of 3D Microstructure Consisting of Polycrystalline Grains and Second-Phase Particles from 2D Micrographs , 2016, Metallurgical and Materials Transactions A.

[4]  J. Wang,et al.  Microstructure and Damage Evolution in Sn-Ag-Cu Solder Joints , 2005, Proceedings Electronic Components and Technology, 2005. ECTC '05..

[5]  John Botsis,et al.  Size and Constraining Effectsin Lead-FreeSolderJoints** , 2006 .

[6]  Paul A. Lauro,et al.  Effect of Sn grain orientation on electromigration degradation mechanism in high Sn-based Pb-free solders , 2008 .

[7]  Brigitte Weiss,et al.  Mechanical Size Effects in Miniaturized Lead-Free Solder Joints , 2008 .

[8]  James C. E. Mertens,et al.  In situ fixture for multi-modal characterization during electromigration and thermal testing of wire-like microscale specimens , 2015, Microelectron. Reliab..

[9]  J. W. Morris,et al.  The effect of Cu6Sn5 whisker precipitates in bulk 60sn-40pb solder , 1987 .

[10]  T. Bieler,et al.  Pb-Free Solder: New Materials Considerations for Microelectronics Processing , 2007 .

[11]  Nikhilesh Chawla,et al.  Mechanisms for Sn whisker growth in rare earth-containing Pb-free solders , 2009 .

[12]  Danan Fan,et al.  Numerical Simulation of Zener Pinning with Growing Second-Phase Particles , 2005 .

[13]  Thomas R. Bieler,et al.  Cyclic twin nucleation in tin-based solder alloys , 2010 .

[14]  E. P. Wood,et al.  In search of new lead-free electronic solders , 1994 .

[15]  X. P. Zhang,et al.  Size and Volume Effects on the Strength of Microscale Lead-Free Solder Joints , 2009 .

[16]  R. S. Sidhu,et al.  Three-dimensional microstructure characterization of Ag3Sn intermetallics in Sn-rich solder by serial sectioning , 2004 .

[17]  Elizabeth A. Holm,et al.  The computer simulation of microstructural evolution , 2001 .

[18]  N. Chawla,et al.  Electromigration Damage Characterization in Sn-3.9Ag-0.7Cu and Sn-3.9Ag-0.7Cu-0.5Ce Solder Joints by Three-Dimensional X-ray Tomography and Scanning Electron Microscopy , 2013, Journal of Electronic Materials.

[19]  Peter Borgesen,et al.  Growth of Sn and intermetallic compounds in Sn-Ag-Cu solder , 2004 .