Experimental studies on rotary valves for single-tube pulse detonation rocket engines

Two types of rotary valve were designed and fabricated for single-tube pulse detonation rocket engines. According to their driving components, they were named as gear-driven and cam-driven rotary valve, respectively. Preliminary experimental investigations were carried out to test their feasibility for supply of the single-tube pulse detonation rocket engine. Based on the gear-driven rotary valve, the single-tube pulse detonation rocket engine operated at 10 Hz stably. When operating frequency was increased to 15 Hz, inconsecutive detonations happened which was due to signal output block in the encoder. It was found that optimal ignition timing needed to be adjusted to obtain stable operation in the gear-driven rotary-valved pulse detonation rocket engine. Discussion on this was conducted. Operations of the cam-driven rotary-valved pulse detonation rocket engine were also performed. Fully developed and successive detonations at 40 Hz were successfully obtained although an explosion happened in initial tests. Experimental results showed that these two types of rotary valve were able to realize supply control of single-tube pulse detonation rocket engines effectively.

[1]  Frank K. Lu,et al.  Experimental study of propane-fueled pulsed detonation rocket , 2003 .

[2]  Richard B. Morrison,et al.  Intermittent detonation as a thrust-producing mechanism : Quarterly progress report no. 1. , 1954 .

[3]  E. Oran,et al.  De∞agration-to-Detonation Transition in H2-Air Mixtures: Efiect of Blockage Ratio , 2009 .

[4]  Joseph E. Shepherd,et al.  AN ANALYTICAL MODEL FOR THE IMPULSE OF A SINGLE-CYCLE PULSE DETONATION ENGINE , 2001 .

[5]  V. F. Nikitin,et al.  Pulse detonation engines: Technical approaches , 2009 .

[6]  K. Kailasanath,et al.  Liquid-Fueled Detonations in Tubes , 2006 .

[7]  Wei Chen,et al.  Propulsive performance of a liquid kerosene/oxygen pulse detonation rocket engine , 2011 .

[8]  R. B. Morrison,et al.  Intermittent Detonation as a Thrust-Producing Mechanism , 1957 .

[9]  Takuma Endo,et al.  Numerical studies on specific impulse of partially filled pulse detonation rocket engines , 2006 .

[10]  Joseph E. Shepherd,et al.  Analytical Model for the Impulse of Single-Cycle Pulse Detonation Tube , 2003 .

[11]  Venkat Tangirala,et al.  Performance Estimations of a Pulse Detonation Engine with Exit Nozzle , 2006 .

[12]  Frank K. Lu,et al.  Development of a compact liquid fueled pulsed detonation engine with predetonator , 2007 .

[13]  Frank K. Lu,et al.  Experimental Study on Deflagration-to-Detonation Transition Enhancement Methods in a PDE , 2006 .

[14]  Joseph E. Shepherd,et al.  Direct Experimental Impulse Measurements for Detonations and Deflagrations , 2001 .

[15]  William H. Heiser,et al.  Thermodynamic Cycle Analysis of Pulse Detonation Engines , 2002 .

[16]  Masao Hirano,et al.  Thrust Measurement of a Multicycle Partially Filled Pulse Detonation Rocket Engine , 2009 .

[17]  Wei Fan,et al.  Experimental investigation on two-phase pulse detonation engine , 2003 .

[18]  C. Brophy,et al.  Operation, Performance, ; Characteristics of a Liquid-Fueled Pulse Detonation Engine , 1999 .

[19]  S.N.B. Murthy,et al.  Pulse Detonation Engine Theory And Concepts , 1996 .

[20]  Sanford Gordon,et al.  Computer program for calculation of complex chemical equilibrium compositions , 1972 .

[21]  Frank K. Lu,et al.  Experimental investigations on DDT enhancements by shchelkin spirals in a PDE , 2006 .

[22]  Faure J. Malo-Molina,et al.  NUMERICAL INVESTIGATION OF 2-D AND 3-D MULTITUBE PULSE DETONATION USING H 2 AND JP8 FUEL* , 2004 .

[23]  Jiro Kasahara,et al.  Study on Valve Systems for Pulse Detonation Engines , 2010 .

[24]  Thomas R. A. Bussing,et al.  Operation of a flight-scale rotary-valved, multiple-combustor, pulse detonation engine (RVMPDE) , 1998 .

[25]  Kailas Kailasanath,et al.  Research on Pulse Detonation Combustion Systems: A Status Report , 2009 .