Optimal design of rainwater collecting systems for domestic use into a residential development

This paper proposes an optimization-based approach for designing rainwater harvesting systems for domestic use in a residential development. The optimization model accounts for the implementation of rainwater harvesting devices, pipes and reservoirs for the optimal sitting, collecting, storing and distribution of harvested rainwater. The optimization model consists in satisfying the water domestic demands and considers as objective function the minimization of the total annual cost associated to the fresh water, the capital costs for the catchment areas, storages and pumps, and the cost associated to the pumping, maintenance and treatment. A case study for a residential development in Morelia, Mexico is presented. The city of Morelia is characterized for having complications to satisfy the water demands, especially during dry seasons. The application of the proposed optimization approach shows that it is possible to satisfy a significant percentage of the domestic water demands using a harvesting rainwater system decreasing the associated cost in the time horizon. Several scenarios have been presented to show the potential solutions identified in the case study.

[1]  John Chilton,et al.  Case study of a rainwater recovery system in a commercial building with a large roof , 2000 .

[2]  Mahmoud M. El-Halwagi,et al.  Water Integration of Eco-Industrial Parks Using a Global Optimization Approach , 2010 .

[3]  F. Abdulla,et al.  Roof rainwater harvesting systems for household water supply in Jordan , 2009 .

[4]  Mahmoud M. El-Halwagi,et al.  A global optimal formulation for the water integration in eco-industrial parks considering multiple pollutants , 2011, Comput. Chem. Eng..

[5]  Mahmoud M. El-Halwagi,et al.  A systems-integration approach to the optimization of macroscopic water desalination and distribution networks: a general framework applied to Qatar’s water resources , 2011, Clean Technologies and Environmental Policy.

[6]  Xiao Feng,et al.  Optimization of water network integrated with process models , 2012, Clean Technologies and Environmental Policy.

[7]  Mahmoud M. El-Halwagi,et al.  A property-based approach to the synthesis of material conservation networks with economic and environmental objectives , 2011 .

[8]  Mahmoud M. El-Halwagi,et al.  A multi-objective approach for property-based synthesis of batch water networks , 2013 .

[9]  Abdallah Shanableh,et al.  Optimisation of rainwater tank design from large roofs: A case study in Melbourne, Australia , 2011 .

[10]  Niranjali Jayasuriya,et al.  Optimal sizing of rain water tanks for domestic water conservation , 2010 .

[11]  Lazaros G. Papageorgiou,et al.  A mixed integer optimisation approach for integrated water resources management , 2011, Comput. Chem. Eng..

[12]  Andreas N. Angelakis,et al.  Water resources management in Crete and in the Aegean Islands, with emphasis on the utilization of non-conventional water sources , 2009 .

[13]  David Kendrick,et al.  GAMS, a user's guide , 1988, SGNM.

[14]  Mahmoud M. El-Halwagi,et al.  Optimal retrofit of water conservation networks , 2011 .

[15]  David Saurí,et al.  A comparative appraisal of the use of rainwater harvesting in single and multi-family buildings of the Metropolitan Area of Barcelona (Spain): social experience, drinking water savings and economic costs , 2011 .

[16]  L. Ness.  Chapter 3 Appendix , 2006, Regional Courts, Domestic Politics, and the Struggle for Human Rights.

[17]  Mahmoud M. El-Halwagi,et al.  Automated targeting technique for concentration- and property-based total resource conservation network , 2010, Comput. Chem. Eng..

[18]  Mahmoud M. El-Halwagi,et al.  Optimal design of distributed treatment systems for the effluents discharged to the rivers , 2012, Clean Technologies and Environmental Policy.

[19]  Francisco Taveira-Pinto,et al.  Analysis of different criteria to size rainwater storage tanks using detailed methods , 2013 .

[20]  D. Butler,et al.  Design Robustness of Local Water-Recycling Schemes , 2010 .

[21]  Nilay Shah,et al.  A superstructure optimization approach for water network synthesis with membrane separation-based regenerators , 2012, Comput. Chem. Eng..

[22]  Alberto Campisano,et al.  Optimal sizing of storage tanks for domestic rainwater harvesting in Sicily , 2012 .

[23]  J. M. Ponce-Ortega,et al.  Global Optimization in Property-Based Interplant Water Integration , 2013 .

[24]  Mahmoud M. El-Halwagi,et al.  Sustainable water management for macroscopic systems , 2013 .

[25]  Mahmoud M. El-Halwagi,et al.  Global optimization of mass and property integration networks with in-plant property interceptors , 2009 .

[26]  Mahmoud M. El-Halwagi,et al.  Global optimization of wastewater integration networks for processes with multiple contaminants , 2012 .

[27]  Christos Makropoulos,et al.  Assessing the combined benefits of water recycling technologies by modelling the total urban water cycle , 2012 .

[28]  C. Deng,et al.  Targeting for Conventional and Property-Based Water Network with Multiple Resources , 2011 .

[29]  Qiang Xu,et al.  Coupling multiple water-reuse network designs for agile manufacturing , 2012, Comput. Chem. Eng..

[30]  Yu Chen,et al.  A study on establishing an optimal water network in a dyeing and finishing industrial park , 2013, Clean Technologies and Environmental Policy.

[31]  Kai Yang,et al.  Cost-effectiveness-based multi-criteria optimization for sustainable rainwater utilization: A case study in Shanghai , 2013 .

[32]  Monzur Alam Imteaz,et al.  Rainwater harvesting potential for southwest Nigeria using daily water balance model , 2012 .

[33]  Fergal Boyle,et al.  Rainwater harvesting and greywater treatment systems for domestic application in Ireland , 2010 .

[34]  David Saurí,et al.  Rainwater harvesting for human consumption and livelihood improvement in rural Nepal: benefits and risks , 2012 .

[35]  Adhityan Appan,et al.  A dual-mode system for harnessing roofwater for non-potable uses , 2000 .

[36]  Mahmoud M. El-Halwagi,et al.  Synthesis of Water Networks Involving Temperature-Based Property Operators and Thermal Effects , 2013 .

[37]  Carles M. Gasol,et al.  Potential of rainwater resources based on urban and social aspects in Colombia , 2012 .

[38]  Mahmoud M. El-Halwagi,et al.  An optimization approach for the synthesis of recycle and reuse water integration networks , 2012, Clean Technologies and Environmental Policy.

[39]  Ahmed N. Bdour,et al.  Water shortage in Jordan — Sustainable solutions , 2010 .

[40]  Ataur Rahman,et al.  Reliability analysis of rainwater tanks : a comparison between South-East and Central Melbourne , 2012 .

[42]  Mahmoud M. El-Halwagi,et al.  Optimal reconfiguration of multi-plant water networks into an eco-industrial park , 2012, Comput. Chem. Eng..