Design considerations of a multiple-input isolated single ended primary inductor converter (SEPIC) for distributed generation sources

This paper explores the multiple-input isolated single ended primary inductor converter (MIISEPIC) and discusses its design considerations for low power distributed generation (DG) sources, such as PV modules. The paper first analyzes the operation of the MIISEPIC, investigates controllable input current ranges that can affect current loop design, such as maximum power point control, and discusses tradeoffs between achievable input current ranges and converter efficiency. Moreover, a novel driving strategy is proposed to improve efficiency and operational flexibility. A proper coupled-inductor design is suggested to minimize switching losses caused by its leakage inductance. A zero-ripple technique is applied to the MIISEPIC to increase its lifetime. Experimental results are provided to validate the analysis.

[1]  E.C. Tatakis,et al.  A novel Parallel Active Filter for Current Pulsation Smoothing on single stage grid-connected AC-PV modules , 2007, 2007 European Conference on Power Electronics and Applications.

[2]  Jian Cao,et al.  A Multiple-Input DC–DC Converter Topology , 2009, IEEE Transactions on Power Electronics.

[3]  R. M. Bass,et al.  On the use of averaging for the analysis of power electronic systems , 1989, 20th Annual IEEE Power Electronics Specialists Conference.

[4]  A. Kwasinski,et al.  Identification of Feasible Topologies for Multiple-Input DC–DC Converters , 2009, IEEE Transactions on Power Electronics.

[5]  Alexis Kwasinski,et al.  Multiple-input single ended primary inductor converter (SEPIC) converter for distributed generation applications , 2009, 2009 IEEE Energy Conversion Congress and Exposition.

[6]  Bor-Ren Lin,et al.  Soft Switching Isolated Sepic Converter with the Buck-Boost Type of Active Clamp , 2007, 2007 2nd IEEE Conference on Industrial Electronics and Applications.

[7]  Wenlong Li,et al.  Comparison of Coaxial Magnetic Gears With Different Topologies , 2009, IEEE Transactions on Magnetics.

[8]  K. Atallah,et al.  A novel high-performance magnetic gear , 2001 .

[9]  D. Howe,et al.  A new PM machine topology for low-speed, high-torque drives , 2008, 2008 18th International Conference on Electrical Machines.

[10]  V. Tarateeraseth,et al.  The Comparison of EMI and Electrical Performances of High Frequency Transformer Windings for SMPS Applications , 2007, 2007 Power Conversion Conference - Nagoya.

[11]  P. T. Krein,et al.  A 'zero' ripple technique applicable to any DC converter , 1999, 30th Annual IEEE Power Electronics Specialists Conference. Record. (Cat. No.99CH36321).

[12]  D. Howe,et al.  A novel magnetic harmonic gear , 2007, 2007 IEEE International Electric Machines & Drives Conference.

[13]  Chunhua Liu,et al.  Design of a Magnetic-Geared Outer-Rotor Permanent-Magnet Brushless Motor for Electric Vehicles , 2007, IEEE Transactions on Magnetics.

[14]  P.O. Rasmussen,et al.  The Cycloid Permanent Magnetic Gear , 2006, IEEE Transactions on Industry Applications.

[15]  Fang Deng.  An improved iron loss estimation for permanent magnet brushless machines , 1997 .

[16]  Maarten J. Kamper,et al.  Development of a shutter type magnetic gear , 2010 .

[17]  Philip T. Krein,et al.  Cost-Effective Hundred-Year Life for Single-Phase Inverters and Rectifiers in Solar and LED Lighting Applications Based on Minimum Capacitance Requirements and a Ripple Power Port , 2009, 2009 Twenty-Fourth Annual IEEE Applied Power Electronics Conference and Exposition.

[18]  Yaow-Ming Chen,et al.  A Systematic Approach to Synthesizing Multi-Input DC/DC Converters , 2007, 2007 IEEE Power Electronics Specialists Conference.

[19]  P.O. Rasmussen,et al.  Development of a high-performance magnetic gear , 2003, IEEE Transactions on Industry Applications.

[20]  J. Saari.  Thermal analysis of high-speed induction machines , 1998 .

[21]  K.T. Chau,et al.  A Magnetic-Geared Outer-Rotor Permanent-Magnet Brushless Machine for Wind Power Generation , 2007, 2007 IEEE Industry Applications Annual Meeting.

[22]  F.D. Rodriguez,et al.  Analysis and modeling of a two-input DC/DC converter with two controlled variables and four switched networks , 1996, IECEC 96. Proceedings of the 31st Intersociety Energy Conversion Engineering Conference.

[23]  Philip T. Krein,et al.  Multiple-input dc-dc converters to enhance local availability in grids using distributed generation resources , 2007, APEC 07 - Twenty-Second Annual IEEE Applied Power Electronics Conference and Exposition.

[24]  T.J. Woolmer,et al.  Analysis of the Yokeless And Segmented Armature Machine , 2007, 2007 IEEE International Electric Machines & Drives Conference.