Multiscale Architected Porous Materials for Renewable Energy Conversion and Storage

[1]  Zhong‐Shuai Wu,et al.  A Thermoregulatory Flexible Phase Change Nonwoven for All-Season High-Efficiency Wearable Thermal Management , 2023, Nano-Micro Letters.

[2]  A. Akbarzadeh,et al.  Magnetically Assisted Rotationally Multistable Metamaterials for Tunable Energy Trapping–Dissipation , 2022, Advanced Functional Materials.

[3]  A. Akbarzadeh,et al.  Programming Multistable Metamaterials to Discover Latent Functionalities , 2022, Advanced science.

[4]  Pengcheng Zhou,et al.  MOFs-Derived Flower-Like Hierarchically Porous Zn-Mn-Se/C Composite for Extraordinary Rate Performance and Durable Anode of Sodium-Ion and Potassium-Ion Batteries. , 2022, Small.

[5]  M. Bolhassani,et al.  Strut‐Based Cellular to Shellular Funicular Materials , 2022, Advanced Functional Materials.

[6]  D. Gao,et al.  Mineral-based form-stable phase change materials for thermal energy storage: A review on encapsulation techniques, performance enhancements and practical applications , 2022, Energy Storage Materials.

[7]  A. Croy,et al.  On-water surface synthesis of charged two-dimensional polymer single crystals via the irreversible Katritzky reaction , 2021, Nature Synthesis.

[8]  Mingwei Chen,et al.  3D Continuously Porous Graphene for Energy Applications , 2021, Advanced materials.

[9]  A. Akbarzadeh,et al.  Heat Transfer in BCC Lattice Materials: Conduction, Convection, and Radiation , 2021, Composite Structures.

[10]  Hongsen Li,et al.  3D Ordered Porous Hybrid of ZnSe/N‐doped Carbon with Anomalously High Na+ Mobility and Ultrathin Solid Electrolyte Interphase for Sodium‐Ion Batteries , 2021, Advanced Functional Materials.

[11]  Lai-fei Cheng,et al.  3D Printed Electrochromic Supercapacitors with Ultrahigh Mechanical Strength and Energy Density. , 2021, Small.

[12]  A. Akbarzadeh,et al.  Programmable Multistable Perforated Shellular , 2021, Advanced materials.

[13]  N. Kim,et al.  Nanostructured CeO2/NiV–LDH composite for energy storage in asymmetric supercapacitor and as methanol oxidation electrocatalyst , 2021, Chemical Engineering Journal.

[14]  Hasitha C. Weerasinghe,et al.  A Review on Emerging Barrier Materials and Encapsulation Strategies for Flexible Perovskite and Organic Photovoltaics , 2021, Advanced Energy Materials.

[15]  L. Etgar,et al.  Fabrication of Perovskite Solar Cells with Digital Control of Transparency by Inkjet Printing. , 2021, ACS applied materials & interfaces.

[16]  Victor A. Beck,et al.  Computational design of microarchitected porous electrodes for redox flow batteries , 2021, Journal of Power Sources.

[17]  Anqiang Pan,et al.  3D printing for rechargeable lithium metal batteries , 2021 .

[18]  Yanyu Chen,et al.  Predicting thermal and mechanical performance of stochastic and architected foams , 2021, International Journal of Heat and Mass Transfer.

[19]  A. Poulin,et al.  Fully 3D Printed and Disposable Paper Supercapacitors , 2021, Advanced materials.

[20]  Wei Fan,et al.  Recent Progress of Wearable Piezoelectric Nanogenerators , 2021 .

[21]  Chang Kyu Jeong,et al.  Multiscale surface modified magneto-mechano-triboelectric nanogenerator enabled by eco-friendly NaCl imprinting stamp for self-powered IoT applications. , 2021, Nanoscale.

[22]  Jianqi Zhang,et al.  Unconventional third components for ternary organic solar cells , 2021 .

[23]  M. Jha,et al.  Design Principles for Manipulating Electrochemical Interfaces in Solid-State Supercapacitors for Wearable Applications , 2021, ACS omega.

[24]  M. Worsley,et al.  Printing Porous Carbon Aerogels for Low Temperature Supercapacitors. , 2021, Nano letters.

[25]  Hongyi Gao,et al.  Carbon‐Based Composite Phase Change Materials for Thermal Energy Storage, Transfer, and Conversion , 2021, Advanced science.

[26]  S. Kim,et al.  Porous organic filler for high efficiency of flexible thermoelectric generator , 2021 .

[27]  F. Ran,et al.  Design Strategies of 3D Carbon‐Based Electrodes for Charge/Ion Transport in Lithium Ion Battery and Sodium Ion Battery , 2021, Advanced Functional Materials.

[28]  Wenbin Kang,et al.  3D Printed Supercapacitors toward Trinity Excellence in Kinetics, Energy Density, and Flexibility , 2021, Advanced Energy Materials.

[29]  A. Kouzani,et al.  3D‐Printed Triboelectric Nanogenerators: State of the Art, Applications, and Challenges , 2021 .

[30]  R. Willing,et al.  Design and analysis of a compliant 3D printed energy harvester housing for knee implants. , 2021, Medical engineering & physics.

[31]  A. Moya,et al.  Fully‐Printed Piezoelectric Devices for Flexible Electronics Applications , 2021, Advanced Materials Technologies.

[32]  Yongde Xia,et al.  Porous ceramics: Light in weight but heavy in energy and environment technologies , 2021, Materials Science and Engineering: R: Reports.

[33]  J. Greer,et al.  Hydrogel‐Based Additive Manufacturing of Lithium Cobalt Oxide , 2020, Advanced materials technologies.

[34]  Sang-Hoon Park,et al.  Stamping of Flexible, Coplanar Micro‐Supercapacitors Using MXene Inks , 2018, Advanced Functional Materials.

[35]  Zhong‐Shuai Wu,et al.  An intrinsically flexible phase change film for wearable thermal managements , 2021, Energy Storage Materials.

[36]  N. Park,et al.  A Review on Scaling Up Perovskite Solar Cells , 2020, Advanced Functional Materials.

[37]  Uli Lemmer,et al.  Shape-Versatile 3D Thermoelectric Generators by Additive Manufacturing , 2020 .

[38]  E. Duoss,et al.  3D printing of metal-based materials for renewable energy applications , 2020, Nano Research.

[39]  Daining Fang,et al.  3D-printed highly deformable electrodes for flexible lithium ion batteries , 2020 .

[40]  Chi Zhang,et al.  Overview of micro/nano-wind energy harvesters and sensors. , 2020, Nanoscale.

[41]  J. Greer,et al.  3D Architected Carbon Electrodes for Energy Storage , 2020, Advanced Energy Materials.

[42]  L. Cinà,et al.  Efficient fully blade-coated perovskite solar cells in air with nanometer-thick bathocuproine buffer layer , 2020, Nano Research.

[43]  Giulia D'ambrogio,et al.  Micro‐Structuration of Piezoelectric Composites Using Dielectrophoresis: Toward Application in Condition Monitoring of Bearings , 2020, Advanced Engineering Materials.

[44]  Jun Chen,et al.  Wearable triboelectric nanogenerators for biomechanical energy harvesting , 2020 .

[45]  Yongchai Kwon,et al.  Effect of pore adjustable hydrophilic nickel coated polyethylene membrane on the performance of aqueous naphthoquinone based redox flow batteries , 2020 .

[46]  U. Rothlisberger,et al.  Vapor-assisted deposition of highly efficient, stable black-phase FAPbI3 perovskite solar cells , 2020, Science.

[47]  Pan Jiang,et al.  3D printing of metal-organic frameworks decorated hierarchical porous ceramics for high-efficiency catalytic degradation , 2020 .

[48]  Cheng Chen,et al.  Additive Manufacturing of Piezoelectric Materials , 2020, Advanced Functional Materials.

[49]  A. Akbarzadeh,et al.  Graded lattice structures: Simultaneous enhancement in stiffness and energy absorption , 2020 .

[50]  B. Lu,et al.  Triboelectric nanogenerators with porous and hierarchically structured silk fibroin films via water electrospray-etching technology , 2020, Nano Energy.

[51]  Chang Woo Lee,et al.  3D-printed architecture of Li-ion batteries and its applications to smart wearable electronic devices , 2020 .

[52]  Xiangming Li,et al.  3D printed piezoelectric BNNTs nanocomposites with tunable interface and microarchitectures for self-powered conformal sensors , 2020 .

[53]  I. Mora‐Seró.  Current Challenges in the Development of Quantum Dot Sensitized Solar Cells , 2020, Advanced Energy Materials.

[54]  W. Cai,et al.  Multifunctional Artificial Artery from Direct 3D Printing with Built‐In Ferroelectricity and Tissue‐Matching Modulus for Real‐Time Sensing and Occlusion Monitoring , 2020, Advanced functional materials.

[55]  Lai-fei Cheng,et al.  A 3D-printed stretchable structural supercapacitor with active stretchability/flexibility and remarkable volumetric capacitance , 2020, Journal of Materials Chemistry A.

[56]  H. Wu,et al.  Flexible 3D Porous MoS2/CNTs Architectures with ZT of 0.17 at Room Temperature for Wearable Thermoelectric Applications , 2020, Advanced Functional Materials.

[57]  J. Zou,et al.  Advanced Thermoelectric Design: From Materials and Structures to Devices. , 2020, Chemical reviews.

[58]  Xizhang Wang,et al.  Carbon-Based Nanocages: Carbon-Based Nanocages: A New Platform for Advanced Energy Storage and Conversion (Adv. Mater. 27/2020) , 2020 .

[59]  Jiecai Han,et al.  2D Transition Metal Dichalcogenides: Design, Modulation, and Challenges in Electrocatalysis , 2020, Advanced materials.

[60]  Shlomo Magdassi,et al.  All 3D-printed stretchable piezoelectric nanogenerator with non-protruding kirigami structure , 2020 .

[61]  Gang Wang,et al.  Flexible in-plane micro-supercapacitors: Progresses and challenges in fabrication and applications , 2020, Energy Storage Materials.

[62]  Zhengbiao Ouyang,et al.  Going green with batteries and supercapacitor: Two dimensional materials and their nanocomposites based energy storage applications , 2020, Progress in Solid State Chemistry.

[63]  Daniel Therriault,et al.  Multi‐Material 3D and 4D Printing: A Survey , 2020, Advanced science.

[64]  Y. Ok,et al.  Nanoarchitectured Structure and Surface Biofunctionality of Mesoporous Silica Nanoparticles , 2020, Advanced materials.

[65]  Mingyan Liu,et al.  CFD simulation of gas-liquid flow in stirred tanks: Effect of drag models , 2020 .

[66]  M. Y. Naz,et al.  Nitrogen Pollution Impact and Remediation through Low Cost Starch Based Biodegradable polymers , 2020, Scientific Reports.

[67]  A. Akbarzadeh,et al.  3D Hierarchical Lattice Ferroelectric Metamaterials , 2020, Progress in Canadian Mechanical Engineering. Volume 3.

[68]  J. Shapter,et al.  Multifunctional nanostructured materials for next generation photovoltaics , 2020 .

[69]  L. Valdevit,et al.  Plate-nanolattices at the theoretical limit of stiffness and strength , 2020, Nature Communications.

[70]  Takuya Togawa,et al.  Heat health risk assessment in Philippine cities using remotely sensed data and social-ecological indicators , 2020, Nature Communications.

[71]  Kun Zhou,et al.  3D printing of cellular materials for advanced electrochemical energy storage and conversion. , 2020, Nanoscale.

[72]  Yexiang Tong,et al.  Harnessing hierarchical architectures to trap light for efficient photoelectrochemical cells , 2020 .

[73]  Jing Luo,et al.  Towards high-performance solid-state Li-S batteries: from fundamental understanding to engineering design. , 2020, Chemical Society reviews.

[74]  Wenli Zhang,et al.  Synthesis Strategies of Porous Carbon for Supercapacitor Applications , 2020 .

[75]  Junsheng Li,et al.  Air-stable red phosphorus anode for potassium/sodium-ion batteries enabled through dual-protection design , 2020 .

[76]  Z. Shariatinia.  Recent progress in development of diverse kinds of hole transport materials for the perovskite solar cells: A review , 2020 .

[77]  Q. Shi,et al.  Photo-triggered Hierarchical Porous Carbon-Based Composite Phase-Change Materials with Superior Thermal Energy Conversion Capacity , 2020 .

[78]  Yan Jin,et al.  Auger Effect Assisted Perovskite Electroluminescence Modulated by Interfacial Minority Carriers , 2020, Advanced Functional Materials.

[79]  Zhong Lin Wang,et al.  Alternating Current Photovoltaic Effect , 2020, Advanced materials.

[80]  Yongfang Li,et al.  A Layer-by-Layer Architecture for Printable Organic Solar Cells Overcoming the Scaling Lag of Module Efficiency , 2020, Joule.

[81]  R. Deivanayagam,et al.  3D Printing of Electrochemical Energy Storage Devices: A Review of Printing Techniques and Electrode/Electrolyte Architectures , 2020 .

[82]  Wu Lei,et al.  3D Printed High‐Loading Lithium‐Sulfur Battery Toward Wearable Energy Storage , 2020, Advanced Functional Materials.

[83]  H. Naguib,et al.  Novel origami-inspired metamaterials: Design, mechanical testing and finite element modelling , 2020 .

[84]  Zhengbiao Ouyang,et al.  Recent developments in emerging two-dimensional materials and their applications , 2020 .

[85]  Jianhua Li,et al.  Advancing Versatile Ferroelectric Materials Toward Biomedical Applications , 2020, Advanced science.

[86]  O. Sigmund,et al.  Quasiperiodic mechanical metamaterials with extreme isotropic stiffness , 2020 .

[87]  Fen Yuan,et al.  Preparation and characterization of a novel piezoelectric nanogenerator based on soluble and meltable copolyimide for harvesting mechanical energy , 2020 .

[88]  M. Li,et al.  3D porous Sb-Co nanocomposites as advanced anodes for sodium-ion batteries and potassium-ion batteries , 2020 .

[89]  E. Detsi,et al.  Small-angle X-ray scattering of nanoporous materials , 2020, Nanoscale Horizons.

[90]  N. Talreja,et al.  Phenol-formaldehyde-resin-based activated carbons with controlled pore size distribution for high-performance supercapacitors , 2020 .

[91]  Xuan Zhang,et al.  Design, Fabrication, and Mechanics of 3D Micro-/Nanolattices. , 2020, Small.

[92]  K. Kubota,et al.  High-Capacity Hard Carbon Synthesized from Macroporous Phenolic Resin for Sodium-Ion and Potassium-Ion Battery , 2020 .

[93]  B. Richards,et al.  Inkjet‐Printed Micrometer‐Thick Perovskite Solar Cells with Large Columnar Grains , 2019, Advanced Energy Materials.

[94]  Sylvie Grugeon,et al.  Three-Dimensional Printing of a LiFePO4/Graphite Battery Cell via Fused Deposition Modeling , 2019, Scientific Reports.

[95]  Renheng Wang,et al.  Recent advances in two-dimensional materials and their nanocomposites in sustainable energy conversion applications. , 2019, Nanoscale.

[96]  C. Nan,et al.  Super-elastic ferroelectric single-crystal membrane with continuous electric dipole rotation , 2019, Science.

[97]  Tianyi Kou,et al.  3D printing of living bacteria electrode , 2019, Nano Research.

[98]  Fude Nie,et al.  3D Printing of Micro‐Architected Al/CuO‐Based Nanothermite for Enhanced Combustion Performance , 2019, Advanced Engineering Materials.

[99]  B. Ding,et al.  Polymer Template Synthesis of Flexible BaTiO3 Crystal Nanofibers , 2019, Advanced Functional Materials.

[100]  Huamin Zhou,et al.  Integrated nanospheres occupancy-removal and thermoforming into bulk piezoelectric and triboelectric hybrid nanogenerators with inverse opal nanostructure , 2019, Nano Energy.

[101]  J. Bell,et al.  Thermal Transport in 3D Nanostructures , 2019, Advanced Functional Materials.

[102]  Yanlin Song,et al.  All-printed 3D hierarchically structured cellulose aerogel based triboelectric nanogenerator for multi-functional sensors , 2019, Nano Energy.

[103]  Tae Yun Kim,et al.  3D-printed biomimetic-villus structure with maximized surface area for triboelectric nanogenerator and dust filter , 2019, Nano Energy.

[104]  T. Tancogne-Dejean,et al.  High Strain Rate Response of Additively-Manufactured Plate-Lattices: Experiments and Modeling , 2019, Journal of Dynamic Behavior of Materials.

[105]  Mohsen Ziaee,et al.  Binder jetting: A review of process, materials, and methods , 2019, Additive Manufacturing.

[106]  D. Therriault,et al.  Thermal conductivity of architected cellular metamaterials , 2019, Acta Materialia.

[107]  Zhong Lin Wang,et al.  Fiber/Fabric‐Based Piezoelectric and Triboelectric Nanogenerators for Flexible/Stretchable and Wearable Electronics and Artificial Intelligence , 2019, Advanced materials.

[108]  Huachen Cui,et al.  Achieving the Upper Bound of Piezoelectric Response in Tunable, Wearable 3D Printed Nanocomposites , 2019, Advanced Functional Materials.

[109]  Yongchul G. Chung,et al.  Surface Area Determination of Porous Materials Using the Brunauer–Emmett–Teller (BET) Method: Limitations and Improvements , 2019, The Journal of Physical Chemistry C.

[110]  Jae‐Woong Jeong,et al.  Advanced Soft Materials, Sensor Integrations, and Applications of Wearable Flexible Hybrid Electronics in Healthcare, Energy, and Environment , 2019, Advanced materials.

[111]  Pengfei Zhang,et al.  Two-Dimensional Interface Engineering of Mesoporous Polydopamine on Graphene for Novel Organic Cathodes , 2019, ACS Applied Energy Materials.

[112]  Yannan Xie,et al.  The construction of integrated Si-based micro proton exchange membrane fuel cells with improved performances , 2019, Nano Energy.

[113]  Qiuwan Wang,et al.  Organic phase change materials confined in carbon-based materials for thermal properties enhancement: Recent advancement and challenges , 2019, Renewable and Sustainable Energy Reviews.

[114]  Jiehua Liu,et al.  Biomass-derived porous carbon materials for advanced lithium sulfur batteries , 2019, Journal of Energy Chemistry.

[115]  Guozheng Kang,et al.  Dynamic Photomask‐Assisted Direct Ink Writing Multimaterial for Multilevel Triboelectric Nanogenerator , 2019, Advanced Functional Materials.

[116]  Yang Wang,et al.  Printed supercapacitors: materials, printing and applications. , 2019, Chemical Society reviews.

[117]  K. Kang,et al.  Another stretching-dominated micro-architectured material, shellular , 2019 .

[118]  C. Seepersad,et al.  Heterogeneities dominate mechanical performance of additively manufactured metal lattice struts , 2019, Additive Manufacturing.

[119]  X. Duan,et al.  In Situ Transmission Electron Microscopy for Energy Materials and Devices , 2019, Advanced materials.

[120]  Matthew J. Carnie,et al.  3D Printed SnSe Thermoelectric Generators with High Figure of Merit , 2019, Advanced Energy Materials.

[121]  Wenzhao Zhou,et al.  Stereolithographic 3D Printing-Based Hierarchically Cellular Lattices for High-Performance Quasi-Solid Supercapacitor , 2019, Nano-micro letters.

[122]  Christine M. Gabardo,et al.  Electrochemical CO2 Reduction into Chemical Feedstocks: From Mechanistic Electrocatalysis Models to System Design , 2019, Advanced materials.

[123]  Pooi See Lee,et al.  Progress on triboelectric nanogenerator with stretchability, self-healability and bio-compatibility , 2019, Nano Energy.

[124]  Zhong Lin Wang,et al.  Piezoelectric Nanotopography Induced Neuron‐Like Differentiation of Stem Cells , 2019, Advanced Functional Materials.

[125]  David Cahen,et al.  Photovoltaic solar cell technologies: analysing the state of the art , 2019, Nature Reviews Materials.

[126]  B. Richards,et al.  Coated and Printed Perovskites for Photovoltaic Applications , 2019, Advanced materials.

[127]  Huajian Gao,et al.  Lightweight, flaw-tolerant, and ultrastrong nanoarchitected carbon , 2019, Proceedings of the National Academy of Sciences.

[128]  Barbara Stadlober,et al.  Route towards sustainable smart sensors: ferroelectric polyvinylidene fluoride-based materials and their integration in flexible electronics. , 2019, Chemical Society reviews.

[129]  Faxing Wang,et al.  Three-dimensional ordered porous electrode materials for electrochemical energy storage , 2019, NPG Asia Materials.

[130]  Huaidong Jiang,et al.  Piezoelectric nylon-11 nanoparticles with ultrasound assistance for high-efficiency promotion of stem cell osteogenic differentiation. , 2019, Journal of materials chemistry. B.

[131]  Christian Breyer,et al.  Radical transformation pathway towards sustainable electricity via evolutionary steps , 2019, Nature Communications.

[132]  Rashid K. Abu Al-Rub,et al.  Mechanical properties of 3D printed polymeric Gyroid cellular structures: Experimental and finite element study , 2019, Materials & Design.

[133]  Seungbum Hong,et al.  An eco-friendly flexible piezoelectric energy harvester that delivers high output performance is based on lead-free MASnI3 films and MASnI3-PVDF composite films , 2019, Nano Energy.

[134]  Lixiao Li,et al.  Topology optimization-guided lattice composites and their mechanical characterizations , 2019, Composites Part B: Engineering.

[135]  Yanqiang Hu,et al.  Fundamental research on the effective contact area of micro-/nano-textured surface in triboelectric nanogenerator , 2019, Nano Energy.

[136]  RaviPrakash Magisetty,et al.  Additive manufacturing technology empowered complex electromechanical energy conversion devices and transformers , 2019, Applied Materials Today.

[137]  Shaomin Liu,et al.  A novel fabrication of yttria-stabilized-zirconia dense electrolyte for solid oxide fuel cells by 3D printing technique , 2019, International Journal of Hydrogen Energy.

[138]  Z. Geng,et al.  Piezoelectric Microchip for Cell Lysis through Cell-Microparticle Collision within a Microdroplet Driven by Surface Acoustic Wave Oscillation. , 2019, Small.

[139]  Konstantinos G. Dassios,et al.  3D printed electrochemical energy storage devices , 2019, Journal of Materials Chemistry A.

[140]  Sang‐Woo Kim,et al.  Hybrid Energy Harvesters: Toward Sustainable Energy Harvesting , 2019, Advanced materials.

[141]  Bin Yao,et al.  Efficient 3D Printed Pseudocapacitive Electrodes with Ultrahigh MnO2 Loading , 2019, Joule.

[142]  Zhiqun Lin,et al.  Barium titanate at the nanoscale: controlled synthesis and dielectric and ferroelectric properties. , 2019, Chemical Society reviews.

[143]  Wei Yang,et al.  High-performance composite phase change materials for energy conversion based on macroscopically three-dimensional structural materials , 2019, Materials Horizons.

[144]  Tianyu Liu,et al.  Block copolymer derived uniform mesopores enable ultrafast electron and ion transport at high mass loadings , 2019, Nature Communications.

[145]  B. Cheng,et al.  Performance enhancements in poly(vinylidene fluoride)-based piezoelectric nanogenerators for efficient energy harvesting , 2019, Nano Energy.

[146]  W. Hu,et al.  Porous nanocomposite gel polymer electrolyte with high ionic conductivity and superior electrolyte retention capability for long-cycle-life flexible zinc–air batteries , 2019, Nano Energy.

[147]  Yunlong Zi,et al.  A novel triboelectric nanogenerator based on electrospun polyvinylidene fluoride nanofibers for effective acoustic energy harvesting and self-powered multifunctional sensing , 2019, Nano Energy.

[148]  Jin Kon Kim,et al.  Nature Driven Bio‐Piezoelectric/Triboelectric Nanogenerator as Next‐Generation Green Energy Harvester for Smart and Pollution Free Society , 2019, Advanced Energy Materials.

[149]  Shashank Priya,et al.  Three-dimensional printing of piezoelectric materials with designed anisotropy and directional response , 2019, Nature Materials.

[150]  A. Akbarzadeh,et al.  Architected cellular piezoelectric metamaterials: Thermo-electro-mechanical properties , 2019, Acta Materialia.

[151]  N. Fang,et al.  Mechanical Metamaterials and Their Engineering Applications , 2019, Advanced Engineering Materials.

[152]  Qianhui Liu,et al.  Porous Polymers as Multifunctional Material Platforms toward Task‐Specific Applications , 2018, Advanced materials.

[153]  Zhou Li,et al.  The recent advances in self‐powered medical information sensors , 2019 .

[154]  Steve Beeby,et al.  Recent progress on textile-based triboelectric nanogenerators , 2019, Nano Energy.

[155]  Li Ma,et al.  Thermal conductivity enhancement of phase change materials with 3D porous diamond foam for thermal energy storage , 2019, Applied Energy.

[156]  Bin Ding,et al.  3D Printing of Tunable Energy Storage Devices with Both High Areal and Volumetric Energy Densities , 2018, Advanced Energy Materials.

[157]  Dou Zhang,et al.  3D‐Printed Microelectrodes with a Developed Conductive Network and Hierarchical Pores toward High Areal Capacity for Microbatteries , 2018, Advanced Materials Technologies.

[158]  Ashok Kumar,et al.  2D layered transition metal dichalcogenides (MoS2): Synthesis, applications and theoretical aspects , 2018, Applied Materials Today.

[159]  Aji P. Mathew,et al.  CelloMOF: Nanocellulose Enabled 3D Printing of Metal–Organic Frameworks , 2018, Advanced Functional Materials.

[160]  H. Ullah,et al.  Soft‐template synthesis of high surface area mesoporous titanium dioxide for dye‐sensitized solar cells , 2018, International Journal of Energy Research.

[161]  John Wang,et al.  3D‐Printed MOF‐Derived Hierarchically Porous Frameworks for Practical High‐Energy Density Li–O2 Batteries , 2018, Advanced Functional Materials.

[162]  Wei Huang,et al.  Materials toward the Upscaling of Perovskite Solar Cells: Progress, Challenges, and Strategies , 2018, Advanced Functional Materials.

[163]  Sagil James,et al.  Study on Nature-inspired Fractal Design-based Flexible Counter Electrodes for Dye-Sensitized Solar Cells Fabricated using Additive Manufacturing , 2018, Scientific Reports.

[164]  Xiujian Chou,et al.  All-in-one filler-elastomer-based high-performance stretchable piezoelectric nanogenerator for kinetic energy harvesting and self-powered motion monitoring , 2018, Nano Energy.

[165]  Riski Titian Ginting,et al.  A novel design of hybrid transparent electrodes for high performance and ultra-flexible bifunctional electrochromic-supercapacitors , 2018, Nano Energy.

[166]  Lip Huat Saw,et al.  Overview of porous media/metal foam application in fuel cells and solar power systems , 2018, Renewable and Sustainable Energy Reviews.

[167]  M. Izquierdo,et al.  Ordered mesoporous carbons obtained by soft-templating of tannin in mild conditions , 2018, Microporous and Mesoporous Materials.

[168]  X. Tao,et al.  Fully Controllable Design and Fabrication of Three-Dimensional Lattice Supercapacitors. , 2018, ACS applied materials & interfaces.

[169]  Jonghyun Park,et al.  3D printed hierarchically-porous microlattice electrode materials for exceptionally high specific capacity and areal capacity lithium ion batteries , 2018, Additive Manufacturing.

[170]  Jin-Woo Han,et al.  All 3D printed energy harvester for autonomous and sustainable resource utilization , 2018, Nano Energy.

[171]  Christopher J. Tassone,et al.  Roll-to-Roll Printing of Perovskite Solar Cells , 2018, ACS Energy Letters.

[172]  Weibang Lu,et al.  3D Printing Fiber Electrodes for an All‐Fiber Integrated Electronic Device via Hybridization of an Asymmetric Supercapacitor and a Temperature Sensor , 2018, Advanced science.

[173]  Dirk Mohr,et al.  3D Plate‐Lattices: An Emerging Class of Low‐Density Metamaterial Exhibiting Optimal Isotropic Stiffness , 2018, Advanced materials.

[174]  Jaephil Cho,et al.  Flexible 3D Interlocking Lithium‐Ion Batteries , 2018, Advanced Energy Materials.

[175]  Yu Song,et al.  Hybrid porous micro structured finger skin inspired self-powered electronic skin system for pressure sensing and sliding detection , 2018, Nano Energy.

[176]  Hanqing Li,et al.  Comprehensive contact analysis for vertical-contact-mode triboelectric nanogenerators with micro-/nano-textured surfaces , 2018, Nano Energy.

[177]  Ang Li,et al.  Hierarchical 3D Reduced Graphene Porous-Carbon-Based PCMs for Superior Thermal Energy Storage Performance. , 2018, ACS applied materials & interfaces.

[178]  Manpreet Kaur,et al.  Hierarchically Designed Electron Paths in 3D Printed Energy Storage Devices. , 2018, Langmuir : the ACS journal of surfaces and colloids.

[179]  Yue Wu,et al.  Large‐Scale, Solution‐Synthesized Nanostructured Composites for Thermoelectric Applications , 2018, Advanced materials.

[180]  Zhimin Xie,et al.  Modified MXene/Holey Graphene Films for Advanced Supercapacitor Electrodes with Superior Energy Storage , 2018, Advanced science.

[181]  Junxiang Zhang,et al.  All-climate aqueous fiber-shaped supercapacitors with record areal energy density and high safety , 2018, Nano Energy.

[182]  C. Bowen,et al.  Understanding the effect of porosity on the polarisation-field response of ferroelectric materials , 2018, Acta Materialia.

[183]  Davoud Jafari,et al.  The utilization of selective laser melting technology on heat transfer devices for thermal energy conversion applications: A review , 2018, Renewable and Sustainable Energy Reviews.

[184]  Saman Rashidi,et al.  Porous materials in building energy technologies—A review of the applications, modelling and experiments , 2018, Renewable and Sustainable Energy Reviews.

[185]  Peng-Fei Li,et al.  Metal-free three-dimensional perovskite ferroelectrics , 2018, Science.

[186]  Ang Li,et al.  Highly graphitized 3D network carbon for shape-stabilized composite PCMs with superior thermal energy harvesting , 2018, Nano Energy.

[187]  S. Ryu,et al.  A scalable, flexible and transparent GaN based heterojunction piezoelectric nanogenerator for bending, air-flow and vibration energy harvesting , 2018, Applied Energy.

[188]  Junwei Ding,et al.  3D Printing Quasi‐Solid‐State Asymmetric Micro‐Supercapacitors with Ultrahigh Areal Energy Density , 2018 .

[189]  Hong Wang,et al.  Sb nanoparticles encapsulated in 3D porous carbon as anode material for lithium-ion and potassium-ion batteries , 2018, Materials Research Bulletin.

[190]  Olle Inganäs,et al.  Organic Photovoltaics over Three Decades , 2018, Advanced materials.

[191]  Lain‐Jong Li,et al.  Two-dimensional materials with piezoelectric and ferroelectric functionalities , 2018, npj 2D Materials and Applications.

[192]  Matthew J. Carnie,et al.  Thin Film Tin Selenide (SnSe) Thermoelectric Generators Exhibiting Ultralow Thermal Conductivity , 2018, Advanced materials.

[193]  Kilwon Cho,et al.  Recent Advances in Morphology Optimization for Organic Photovoltaics , 2018, Advanced materials.

[194]  Qifa Zhou,et al.  Recent Progress in Biomimetic Additive Manufacturing Technology: From Materials to Functional Structures , 2018, Advanced materials.

[195]  Yang Zhang,et al.  Ferroelectric and Piezoelectric Effects on the Optical Process in Advanced Materials and Devices , 2018, Advanced materials.

[196]  Lih-Sheng Turng,et al.  High-performance flexible triboelectric nanogenerator based on porous aerogels and electrospun nanofibers for energy harvesting and sensitive self-powered sensing , 2018, Nano Energy.

[197]  Yuan Gao,et al.  Recent progress on printable power supply devices and systems with nanomaterials , 2018, Nano Research.

[198]  S. Bent,et al.  Atomic and Molecular Layer Deposition of Hybrid Mo–Thiolate Thin Films with Enhanced Catalytic Activity , 2018 .

[199]  Zhe Wang,et al.  Laminated Object Manufacturing of 3D‐Printed Laser‐Induced Graphene Foams , 2018, Advanced materials.

[200]  Héctor D. Abruña,et al.  Block copolymer derived 3-D interpenetrating multifunctional gyroidal nanohybrids for electrical energy storage , 2018 .

[201]  W. Kang,et al.  Nano-architected metamaterials: Carbon nanotube-based nanotrusses , 2018 .

[202]  Hengyu Guo,et al.  Rolling friction contact-separation mode hybrid triboelectric nanogenerator for mechanical energy harvesting and self-powered multifunctional sensors , 2018 .

[203]  Kang Hyuck Lee,et al.  Point‐Defect‐Passivated MoS2 Nanosheet‐Based High Performance Piezoelectric Nanogenerator , 2018, Advanced materials.

[204]  Shengxi Zhou,et al.  High-Performance Piezoelectric Energy Harvesters and Their Applications , 2018 .

[205]  Min Ho Lee,et al.  3D printing of shape-conformable thermoelectric materials using all-inorganic Bi2Te3-based inks , 2018 .

[206]  Kornelius Nielsch,et al.  Thermoelectric Devices: A Review of Devices, Architectures, and Contact Optimization , 2018 .

[207]  R. Demadrille,et al.  Increasing the Efficiency of Organic Dye‐Sensitized Solar Cells over 10.3% Using Locally Ordered Inverse Opal Nanostructures in the Photoelectrode , 2018 .

[208]  Yanlin Song,et al.  Inkjet manipulated homogeneous large size perovskite grains for efficient and large-area perovskite solar cells , 2018 .

[209]  C. Banks,et al.  Antimonene: A Novel 2D Nanomaterial for Supercapacitor Applications , 2018 .

[210]  Guangming Wu,et al.  Toward Superior Capacitive Energy Storage: Recent Advances in Pore Engineering for Dense Electrodes , 2018, Advanced materials.

[211]  Diana Golodnitsky,et al.  Novel rechargeable 3D-Microbatteries on 3D-printed-polymer substrates: Feasibility study , 2018 .

[212]  Boyang Liu,et al.  Extrusion‐Based 3D Printing of Hierarchically Porous Advanced Battery Electrodes , 2018, Advanced materials.

[213]  Qin Wu,et al.  Scalable 2D Hierarchical Porous Carbon Nanosheets for Flexible Supercapacitors with Ultrahigh Energy Density , 2018, Advanced materials.

[214]  Bin Chen,et al.  Patterning Graphene Surfaces with Iron-Oxide-Embedded Mesoporous Polypyrrole and Derived N-Doped Carbon of Tunable Pore Size. , 2018, Small.

[215]  A. Schroer,et al.  Evaluating sputter deposited metal coatings on 3D printed polymer micro-truss structures , 2018 .

[216]  Swagata Roy,et al.  Superior performances of in situ synthesized ZnO/PVDF thin film based self-poled piezoelectric nanogenerator and self-charged photo-power bank with high durability , 2018 .

[217]  Kaushik Parida,et al.  Core-shell nanofiber mats for tactile pressure sensor and nanogenerator applications , 2018 .

[218]  M. Dubé,et al.  Printing Polymer Nanocomposites and Composites in Three Dimensions , 2018 .

[219]  Feroza Begum,et al.  Nanomaterials for solid oxide fuel cells: A review , 2018 .

[220]  Maoxiang Wu,et al.  Oriented Growth of ZIF‐67 to Derive 2D Porous CoPO Nanosheets for Electrochemical‐/Photovoltage‐Driven Overall Water Splitting , 2018 .

[221]  Mingjun Hu,et al.  3D printed porous carbon anode for enhanced power generation in microbial fuel cell , 2018 .

[222]  David E.J. Armstrong,et al.  Hybrid electrolytes with 3D bicontinuous ordered ceramic and polymer microchannels for all-solid-state batteries , 2018 .

[223]  Tao Jiang,et al.  Three-dimensional ultraflexible triboelectric nanogenerator made by 3D printing , 2017, Nano Energy.

[224]  X. Duan,et al.  Hierarchical 3D electrodes for electrochemical energy storage , 2018, Nature Reviews Materials.

[225]  Zhuo Liu,et al.  Piezoelectric nanofibrous scaffolds as in vivo energy harvesters for modifying fibroblast alignment and proliferation in wound healing , 2018 .

[226]  Z. Qian,et al.  Electric potential and carrier distribution in a piezoelectric semiconductor nanowire in time-harmonic bending vibration , 2018 .

[227]  Yunya Zhang,et al.  A High‐Performing Direct Carbon Fuel Cell with a 3D Architectured Anode Operated Below 600 °C , 2018, Advanced materials.

[228]  Sumanta Kumar Karan,et al.  Bio-waste onion skin as an innovative nature-driven piezoelectric material with high energy conversion efficiency , 2017 .

[229]  S. Ramakrishna,et al.  A review on inkjet printing of CNT composites for smart applications , 2017 .

[230]  Xiaodong Zhuang,et al.  Toward a molecular design of porous carbon materials , 2017 .

[231]  B. D. Nguyen,et al.  Design of the P-surfaced shellular, an ultra-low density material with micro-architecture , 2017 .

[232]  Xiaogang Han,et al.  3D‐Printed All‐Fiber Li‐Ion Battery toward Wearable Energy Storage , 2017 .

[233]  Julia R. Greer,et al.  Reexamining the mechanical property space of three-dimensional lattice architectures , 2017 .

[234]  Qi Zhang,et al.  Perovskite and Organic Solar Cells Fabricated by Inkjet Printing: Progress and Prospects , 2017 .

[235]  Z. Chang,et al.  Superaerophobic Ultrathin Ni-Mo Alloy Nanosheet Array from In Situ Topotactic Reduction for Hydrogen Evolution Reaction. , 2017, Small.

[236]  Wen Tong Chong,et al.  Computational fluid dynamics simulation on open cell aluminium foams for Li-ion battery cooling system , 2017 .

[237]  Feng Zhang,et al.  3D printing technologies for electrochemical energy storage , 2017 .

[238]  L. Valdevit,et al.  Nanolattices: An Emerging Class of Mechanical Metamaterials , 2017, Advanced materials.

[239]  Zhongfan Liu,et al.  Hierarchical Graphene Foam for Efficient Omnidirectional Solar–Thermal Energy Conversion , 2017, Advanced materials.

[240]  Mehmet C. Öztürk,et al.  Flexible thermoelectric generator using bulk legs and liquid metal interconnects for wearable electronics , 2017 .

[241]  T. Zhai,et al.  Layer Structured Materials for Advanced Energy Storage and Conversion. , 2017, Small.

[242]  Chee Kai Chua,et al.  Emerging 3D‐Printed Electrochemical Energy Storage Devices: A Critical Review , 2017 .

[243]  F. Zhang,et al.  Revitalizing carbon supercapacitor electrodes with hierarchical porous structures , 2017 .

[244]  Tianyu Liu,et al.  3D printed functional nanomaterials for electrochemical energy storage , 2017 .

[245]  E. Toyserkani,et al.  Binder-jet powder-bed additive manufacturing (3D printing) of thick graphene-based electrodes , 2017 .

[246]  Y. Tong,et al.  Engineering Thin MoS2 Nanosheets on TiN Nanorods: Advanced Electrochemical Capacitor Electrode and Hydrogen Evolution Electrocatalyst , 2017 .

[247]  R. Mülhaupt,et al.  Polymers for 3D Printing and Customized Additive Manufacturing , 2017, Chemical reviews.

[248]  Wenmiao Shu,et al.  Additive Manufacturing: Unlocking the Evolution of Energy Materials , 2017, Advanced science.

[249]  Jinlan Wang,et al.  An organic-inorganic perovskite ferroelectric with large piezoelectric response , 2017, Science.

[250]  J. Keum,et al.  Unrivaled combination of surface area and pore volume in micelle-templated carbon for supercapacitor energy storage , 2017 .

[251]  J. Greer,et al.  3D nano-architected metallic glass: Size effect suppresses catastrophic failure , 2017 .

[252]  Peter G. Boyd,et al.  Accurate Characterization of the Pore Volume in Microporous Crystalline Materials , 2017, Langmuir : the ACS journal of surfaces and colloids.

[253]  Zongping Shao,et al.  Recent Progress on Advanced Materials for Solid‐Oxide Fuel Cells Operating Below 500 °C , 2017, Advanced materials.

[254]  Yaqin Huang,et al.  Biomass-derived mesopore-dominant porous carbons with large specific surface area and high defect density as high performance electrode materials for Li-ion batteries and supercapacitors , 2017 .

[255]  J. A. Esfahani,et al.  A review on the applications of porous materials in solar energy systems , 2017 .

[256]  B. Lu,et al.  High-Performance Piezoelectric Nanogenerators with Imprinted P(VDF-TrFE)/BaTiO3 Nanocomposite Micropillars for Self-Powered Flexible Sensors. , 2017, Small.

[257]  Po-Yen Chen,et al.  From Flatland to Spaceland: Higher Dimensional Patterning with Two‐Dimensional Materials , 2017, Advanced materials.

[258]  Cairong Jiang,et al.  Challenges in developing direct carbon fuel cells. , 2017, Chemical Society reviews.

[259]  Nahil Sobh,et al.  Mechanical properties of 3D printed polymeric cellular materials with triply periodic minimal surface architectures , 2017 .

[260]  Ju-Hyuck Lee,et al.  High‐Performance Triboelectric Nanogenerators Based on Solid Polymer Electrolytes with Asymmetric Pairing of Ions , 2017 .

[261]  Jianwei Song,et al.  3D‐Printed, All‐in‐One Evaporator for High‐Efficiency Solar Steam Generation under 1 Sun Illumination , 2017, Advanced materials.

[262]  M. Messner,et al.  Mapping local deformation behavior in single cell metal lattice structures , 2017 .

[263]  B. Dunn,et al.  Porous One‐Dimensional Nanomaterials: Design, Fabrication and Applications in Electrochemical Energy Storage , 2017, Advanced materials.

[264]  Juan Carlos Ruiz-Morales,et al.  Three dimensional printing of components and functional devices for energy and environmental applications , 2017 .

[265]  K. Khanum,et al.  Design and Fabrication of Photonic Structured Organic Solar Cells by Electrospraying , 2017 .

[266]  Nasiru I. Ibrahim,et al.  A review on current status and challenges of inorganic phase change materials for thermal energy storage systems , 2017 .

[267]  Xinliang Feng,et al.  Soft-Template Construction of 3D Macroporous Polypyrrole Scaffolds. , 2017, Small.

[268]  X. Lou,et al.  Complex Hollow Nanostructures: Synthesis and Energy‐Related Applications , 2017, Advanced materials.

[269]  Zhou Li,et al.  Recent Progress on Piezoelectric and Triboelectric Energy Harvesters in Biomedical Systems , 2017, Advanced science.

[270]  Kai Zhu,et al.  Perovskite ink with wide processing window for scalable high-efficiency solar cells , 2017, Nature Energy.

[271]  Qiyuan He,et al.  Recent Advances in Ultrathin Two-Dimensional Nanomaterials. , 2017, Chemical reviews.

[272]  Yan Zhang,et al.  3D Printed Graphene Based Energy Storage Devices , 2017, Scientific Reports.

[273]  Woo Soo Kim,et al.  Three-dimensionally printed cellular architecture materials: perspectives on fabrication, material advances, and applications , 2017 .

[274]  Steve Beeby,et al.  Flexible piezoelectric nano-composite films for kinetic energy harvesting from textiles , 2017 .

[275]  Liangbing Hu,et al.  Progress in 3D Printing of Carbon Materials for Energy‐Related Applications , 2017, Advanced materials.

[276]  H. Wadley,et al.  Mechanical metamaterials at the theoretical limit of isotropic elastic stiffness , 2017, Nature.

[277]  Jin Xuan,et al.  Macroporous materials: microfluidic fabrication, functionalization and applications. , 2017, Chemical Society reviews.

[278]  Jianliang Wang,et al.  The implications of fossil fuel supply constraints on climate change projections: a supply-side analysis , 2017 .

[279]  Jiawei Gong,et al.  Review on dye-sensitized solar cells (DSSCs): Advanced techniques and research trends , 2017 .

[280]  Alexander C. Forse,et al.  Direct observation of ion dynamics in supercapacitor electrodes using in situ diffusion NMR spectroscopy , 2017, Nature Energy.

[281]  Howon Lee,et al.  Tunable Multifunctional Thermal Metamaterials: Manipulation of Local Heat Flux via Assembly of Unit-Cell Thermal Shifters , 2017, Scientific Reports.

[282]  Jin-Ho Choy,et al.  Mesoporous carbon nitrides: synthesis, functionalization, and applications. , 2017, Chemical Society reviews.

[283]  K. Tsuchiya,et al.  Nano-micro-porous skutterudites with 100% enhancement in ZT for high performance thermoelectricity , 2017 .

[284]  Yeon Sik Choi,et al.  Piezoelectric Nylon‐11 Nanowire Arrays Grown by Template Wetting for Vibrational Energy Harvesting Applications , 2017 .

[285]  S. Barnett,et al.  Philosophical Transactions of the Royal Society A : Mathematical , 2017 .

[286]  J. Lewis,et al.  Printing soft matter in three dimensions , 2016, Nature.

[287]  Canan Dagdeviren,et al.  The future of bionic dynamos , 2016, Science.

[288]  M. Tadé,et al.  Heteroatom (N or N‐S)‐Doping Induced Layered and Honeycomb Microstructures of Porous Carbons for CO2 Capture and Energy Applications , 2016 .

[289]  E. Tervoort,et al.  3D Printing of Emulsions and Foams into Hierarchical Porous Ceramics , 2016, Advanced materials.

[290]  B. Cho,et al.  High-Performance Flexible Thermoelectric Power Generator Using Laser Multiscanning Lift-Off Process. , 2016, ACS nano.

[291]  Jian Cheng,et al.  Flexible Batteries: From Mechanics to Devices , 2016 .

[292]  Yang Xu,et al.  Three-dimensional macro-structures of two-dimensional nanomaterials. , 2016, Chemical Society reviews.

[293]  Peter Enoksson,et al.  Solidification of 3D Printed Nanofibril Hydrogels into Functional 3D Cellulose Structures , 2016 .

[294]  Hongzhi Wang,et al.  Flexible and thermostable thermoelectric devices based on large-area and porous all-graphene films , 2016 .

[295]  D. Pasini,et al.  Electrically conducting sandwich cylinder with a planar lattice core under prescribed eigenstrain and magnetic field , 2016 .

[296]  Xiaodong Zhuang,et al.  Dual‐Template Synthesis of 2D Mesoporous Polypyrrole Nanosheets with Controlled Pore Size , 2016, Advanced materials.

[297]  Zhong Lin Wang,et al.  Self-powered textile for wearable electronics by hybridizing fiber-shaped nanogenerators, solar cells, and supercapacitors , 2016, Science Advances.

[298]  Ryan Wicker,et al.  Multiprocess 3D printing for increasing component functionality , 2016, Science.

[299]  Qiming Wang,et al.  Highly-stretchable 3D-architected Mechanical Metamaterials , 2016, Scientific Reports.

[300]  Qifa Zhou,et al.  3D printing of piezoelectric element for energy focusing and ultrasonic sensing , 2016 .

[301]  T. Tancogne-Dejean,et al.  Additively-manufactured metallic micro-lattice materials for high specific energy absorption under static and dynamic loading , 2016 .

[302]  Gangjian Tan,et al.  Rationally Designing High-Performance Bulk Thermoelectric Materials. , 2016, Chemical reviews.

[303]  Sheikh Ahmad Zaki,et al.  A review on phase change material (PCM) for sustainable passive cooling in building envelopes , 2016 .

[304]  E. Giannelis,et al.  Design Principles for Optimum Performance of Porous Carbons in Lithium–Sulfur Batteries , 2016 .

[305]  Lidong Chen,et al.  Thermoelectric materials step up. , 2016, Nature materials.

[306]  Zhong‐Yong Yuan,et al.  Applications of hierarchically structured porous materials from energy storage and conversion, catalysis, photocatalysis, adsorption, separation, and sensing to biomedicine. , 2016, Chemical Society reviews.

[307]  Wieslaw J. Roth,et al.  Layer like porous materials with hierarchical structure. , 2016, Chemical Society reviews.

[308]  F. Fan,et al.  Flexible Nanogenerators for Energy Harvesting and Self‐Powered Electronics , 2016, Advanced materials.

[309]  Yanlin Song,et al.  Direct Writing of Patterned, Lead‐Free Nanowire Aligned Flexible Piezoelectric Device , 2016, Advanced science.

[310]  Hongyi Gao,et al.  Introduction of an organic acid phase changing material into metal–organic frameworks and the study of its thermal properties , 2016 .

[311]  Martin Pumera,et al.  3D-printing technologies for electrochemical applications. , 2016, Chemical Society reviews.

[312]  Albert Folch,et al.  The upcoming 3D-printing revolution in microfluidics. , 2016, Lab on a chip.

[313]  Jun Liu,et al.  Mesoporous materials for energy conversion and storage devices , 2016 .

[314]  Abdul W. Basit,et al.  Stereolithographic (SLA) 3D printing of oral modified-release dosage forms. , 2016, International journal of pharmaceutics.

[315]  R. Soares,et al.  Designing Biomaterials for 3D Printing. , 2016, ACS biomaterials science & engineering.

[316]  E. Duoss,et al.  3D printed cellular solid outperforms traditional stochastic foam in long-term mechanical response , 2016, Scientific Reports.

[317]  B. D. Nguyen,et al.  Optimal design of “Shellular”, a micro-architectured material with ultralow density , 2016 .

[318]  P. Hazell,et al.  Metallic microlattice materials: a current state of the art on manufacturing, mechanical properties and applications , 2016 .

[319]  Rashid K. Abu Al-Rub,et al.  Effective conductivities and elastic moduli of novel foams with triply periodic minimal surfaces , 2016 .

[320]  Qifa Zhou,et al.  Three dimensional printing of high dielectric capacitor using projection based stereolithography method , 2016 .

[321]  Il-Kwon Oh,et al.  Silk Nanofiber‐Networked Bio‐Triboelectric Generator: Silk Bio‐TEG , 2016 .

[322]  O. Kraft,et al.  Approaching theoretical strength in glassy carbon nanolattices. , 2016, Nature materials.

[323]  Huaidong Jiang,et al.  Cellular internalization of LiNbO3 nanocrystals for second harmonic imaging and the effects on stem cell differentiation. , 2016, Nanoscale.

[324]  Peng Zhang,et al.  A review of the composite phase change materials: Fabrication, characterization, mathematical modeling and application to performance enhancement , 2016 .

[325]  W. G. Strand,et al.  Impact of solar panels on global climate , 2016 .

[326]  Hong Liu,et al.  One‐Dimensional Ferroelectric Nanostructures: Synthesis, Properties, and Applications , 2016, Advanced science.

[327]  Martin Pumera,et al.  Helical 3D‐Printed Metal Electrodes as Custom‐Shaped 3D Platform for Electrochemical Devices , 2016 .

[328]  Qi Zhang,et al.  Thermoelectric Devices for Power Generation: Recent Progress and Future Challenges   , 2016 .

[329]  Fang Qian,et al.  Supercapacitors Based on Three-Dimensional Hierarchical Graphene Aerogels with Periodic Macropores. , 2016, Nano letters.

[330]  Jeong Woo Lee,et al.  Mechanical analyses of “Shellular”, an ultralow-density material , 2016 .

[331]  L. Valdevit,et al.  Fabrication of 3D Micro-Architected/Nano-Architected Materials , 2016 .

[332]  F. Calignano,et al.  Additive Manufacturing of a Microbial Fuel Cell—A detailed study , 2015, Scientific Reports.

[333]  Sung Kyun Kim,et al.  Shape memory polymer-based self-healing triboelectric nanogenerator , 2015 .

[334]  B. Kale,et al.  Nanostructured 2D MoS2 honeycomb and hierarchical 3D CdMoS4 marigold nanoflowers for hydrogen production under solar light , 2015 .

[335]  Qian Sun,et al.  Printing nanostructured carbon for energy storage and conversion applications , 2015 .

[336]  Seung Chul Han,et al.  A New Type of Low Density Material: Shellular , 2015, Advanced materials.

[337]  G. Soloveichik.  Flow Batteries: Current Status and Trends. , 2015, Chemical reviews.

[338]  Jonathan Rossiter,et al.  Cast and 3D Printed Ion Exchange Membranes for Monolithic Microbial Fuel Cell Fabrication , 2015 .

[339]  Ankanahalli Shankaregowda Smitha,et al.  Roll‐to‐Roll Green Transfer of CVD Graphene onto Plastic for a Transparent and Flexible Triboelectric Nanogenerator , 2015, Advanced materials.

[340]  Li Ma,et al.  Advanced Micro‐Lattice Materials , 2015 .

[341]  Haitao Huang,et al.  A rectification-free piezo-supercapacitor with a polyvinylidene fluoride separator and functionalized carbon cloth electrodes , 2015 .

[342]  Nae-Eung Lee,et al.  High-performance flexible lead-free nanocomposite piezoelectric nanogenerator for biomechanical energy harvesting and storage , 2015 .

[343]  K. Vafai.  Handbook of porous media , 2015 .

[344]  Sumanta Kumar Karan,et al.  Self-powered flexible Fe-doped RGO/PVDF nanocomposite: an excellent material for a piezoelectric energy harvester. , 2015, Nanoscale.

[345]  G. Cao,et al.  Dye-sensitized solar cells based on hierarchically structured porous TiO 2 filled with nanoparticles , 2015 .

[346]  Yanqing Wu,et al.  Unfolding grain size effects in barium titanate ferroelectric ceramics , 2015, Scientific Reports.

[347]  Jeong Min Baik,et al.  Silk fibroin-based biodegradable piezoelectric composite nanogenerators using lead-free ferroelectric nanoparticles , 2015 .

[348]  Alexandra M. Golobic,et al.  Highly compressible 3D periodic graphene aerogel microlattices , 2015, Nature Communications.

[349]  Alex K.-Y. Jen,et al.  Recent progress and perspective in solution-processed Interfacial materials for efficient and stable polymer and organometal perovskite solar cells , 2015 .

[350]  D. Therriault,et al.  3D printing of a multifunctional nanocomposite helical liquid sensor. , 2015, Nanoscale.

[351]  G. Cheng,et al.  High thermoelectric figure-of-merits from large-area porous silicon nanowire arrays , 2015 .

[352]  K. Loh,et al.  Two-dimensional dichalcogenides for light-harvesting applications , 2015 .

[353]  Juan-Yu Yang,et al.  A Layered‐Nanospace‐Confinement Strategy for the Synthesis of Two‐Dimensional Porous Carbon Nanosheets for High‐Rate Performance Supercapacitors , 2015 .

[354]  Yong Lei,et al.  Template-directed construction of nanostructure arrays for highly-efficient energy storage and conversion , 2015 .

[355]  H. Aboul‐Enein,et al.  X-Ray Diffraction: Instrumentation and Applications , 2015, Critical reviews in analytical chemistry.

[356]  Q. Pei,et al.  A colour-tunable, weavable fibre-shaped polymer light-emitting electrochemical cell , 2015, Nature Photonics.

[357]  R. Ho,et al.  Well-ordered nanohybrids and nanoporous materials from gyroid block copolymer templates. , 2015, Chemical Society reviews.

[358]  Chris Melhuish,et al.  A novel small scale Microbial Fuel Cell design for increased electricity generation and waste water treatment , 2015 .

[359]  Xiluan Wang,et al.  Flexible graphene devices related to energy conversion and storage , 2015 .

[360]  Jayan Thomas,et al.  Supercapacitor electrode materials: nanostructures from 0 to 3 dimensions , 2015 .

[361]  Arumugam Manthiram,et al.  Lithium–Sulfur Batteries: Progress and Prospects , 2015, Advanced materials.

[362]  Benjamin M. Wu,et al.  Recent advances in 3D printing of biomaterials , 2015, Journal of biological engineering.

[363]  D. L. Mafra,et al.  Controlled porous structures of graphene aerogels and their effect on supercapacitor performance. , 2015, Nanoscale.

[364]  J. Lewis,et al.  Device fabrication: Three-dimensional printed electronics , 2015, Nature.

[365]  Noel Clark,et al.  3D Printer Based Slot‐Die Coater as a Lab‐to‐Fab Translation Tool for Solution‐Processed Solar Cells , 2015 .

[366]  Xiao Liang,et al.  A highly efficient polysulfide mediator for lithium–sulfur batteries , 2015, Nature Communications.

[367]  S. LeBlanc.  Thermoelectric generators: Linking material properties and systems engineering for waste heat recovery applications , 2014 .

[368]  Vijay Narayan,et al.  A Scalable Nanogenerator Based on Self‐Poled Piezoelectric Polymer Nanowires with High Energy Conversion Efficiency , 2014, 1505.03694.

[369]  Frede Blaabjerg,et al.  Renewable energy resources: Current status, future prospects and their enabling technology , 2014 .

[370]  Damar Yoga Kusuma,et al.  Polarization Orientation, Piezoelectricity, and Energy Harvesting Performance of Ferroelectric PVDF‐TrFE Nanotubes Synthesized by Nanoconfinement , 2014 .

[371]  J. Silvestre-Albero,et al.  Mesoporous materials for clean energy technologies. , 2014, Chemical Society reviews.

[372]  P. Sun,et al.  Interstratified nanohybrid assembled by alternating cationic layered double hydroxide nanosheets and anionic layered titanate nanosheets with superior photocatalytic activity. , 2014, Journal of hazardous materials.

[373]  H. Funakubo,et al.  Effects of the porous structures in the porous flow field type separators on fuel cell performances , 2014 .

[374]  Yunqi Liu,et al.  Freestanding graphene paper supported three-dimensional porous graphene-polyaniline nanocomposite synthesized by inkjet printing and in flexible all-solid-state supercapacitor. , 2014, ACS applied materials & interfaces.

[375]  Anthony Atala,et al.  3D bioprinting of tissues and organs , 2014, Nature Biotechnology.

[376]  Wei Zhu,et al.  3D optical printing of piezoelectric nanoparticle-polymer composite materials. , 2014, ACS nano.

[377]  Chang Kyu Jeong,et al.  Self‐Powered Cardiac Pacemaker Enabled by Flexible Single Crystalline PMN‐PT Piezoelectric Energy Harvester , 2014, Advanced materials.

[378]  Amay J Bandodkar,et al.  Non-invasive wearable electrochemical sensors: a review. , 2014, Trends in biotechnology.

[379]  B. Liu,et al.  Flexible Energy‐Storage Devices: Design Consideration and Recent Progress , 2014, Advanced materials.

[380]  Howon Lee,et al.  Ultralight, ultrastiff mechanical metamaterials , 2014, Science.

[381]  D. Zhao,et al.  Ordered Macro‐/Mesoporous Anatase Films with High Thermal Stability and Crystallinity for Photoelectrocatalytic Water‐Splitting , 2014 .

[382]  I. MacGill,et al.  Comparing least cost scenarios for 100% renewable electricity with low emission fossil fuel scenarios in the Australian National Electricity Market , 2014 .

[383]  B. Cho,et al.  A wearable thermoelectric generator fabricated on a glass fabric , 2014 .

[384]  Z. Yin,et al.  Three-dimensional graphene materials: preparation, structures and application in supercapacitors , 2014 .

[385]  K. Cho,et al.  Graphite/Silicon Hybrid Electrodes using a 3D Current Collector for Flexible Batteries , 2014, Advanced materials.

[386]  B. Dunn,et al.  Pseudocapacitive oxide materials for high-rate electrochemical energy storage , 2014 .

[387]  J. Rhee,et al.  Effects of graphene counter electrode and CdSe quantum dots in TiO2 and ZnO on dye‐sensitized solar cell performance , 2014 .

[388]  Stephen Beirne,et al.  Three dimensional (3D) printed electrodes for interdigitated supercapacitors , 2014 .

[389]  T. Isotalo,et al.  Engineering thermal conductance using a two-dimensional phononic crystal , 2014, Nature Communications.

[390]  R. Ruoff,et al.  Enhanced thermal conductivity of phase change materials with ultrathin-graphite foams for thermal energy storage , 2014 .

[391]  Stefan Hengsbach,et al.  High-strength cellular ceramic composites with 3D microarchitecture , 2014, Proceedings of the National Academy of Sciences.

[392]  Xinliang Feng,et al.  Porous Graphene Materials for Advanced Electrochemical Energy Storage and Conversion Devices , 2014, Advanced materials.

[393]  Candace K. Chan,et al.  Origami lithium-ion batteries , 2014, Nature Communications.

[394]  Manoj Kumar Gupta,et al.  Unidirectional High‐Power Generation via Stress‐Induced Dipole Alignment from ZnSnO3 Nanocubes/Polymer Hybrid Piezoelectric Nanogenerator , 2014 .

[395]  D. Zhao,et al.  Ordered Mesoporous Materials Based on Interfacial Assembly and Engineering , 2013 .

[396]  Liyan Wu,et al.  Perovskite oxides for visible-light-absorbing ferroelectric and photovoltaic materials , 2013, Nature.

[397]  Xinming Li,et al.  Large‐Area Flexible Core–Shell Graphene/Porous Carbon Woven Fabric Films for Fiber Supercapacitor Electrodes , 2013 .

[398]  Shufen Zhang,et al.  Single‐Walled Carbon Nanotube/Phase Change Material Composites: Sunlight‐Driven, Reversible, Form‐Stable Phase Transitions for Solar Thermal Energy Storage , 2013 .

[399]  J. Zondlo,et al.  Investigation of anode configurations and fuel mixtures on the performance of direct carbon fuel cells (DCFCs) , 2013 .

[400]  J. Lewis,et al.  3D Printing of Interdigitated Li‐Ion Microbattery Architectures , 2013, Advanced materials.

[401]  Ming-Chuan Leu,et al.  Additive manufacturing: technology, applications and research needs , 2013, Frontiers of Mechanical Engineering.

[402]  Dong Ding,et al.  Efficient Electro‐Catalysts for Enhancing Surface Activity and Stability of SOFC Cathodes , 2013 .

[403]  Zhong Lin Wang,et al.  Single-electrode-based sliding triboelectric nanogenerator for self-powered displacement vector sensor system. , 2013, ACS nano.

[404]  Jong-Sung Yu,et al.  Hierarchical nanostructured carbons with meso-macroporosity: design, characterization, and applications. , 2013, Accounts of chemical research.

[405]  Liang Hou,et al.  Additive manufacturing and its societal impact: a literature review , 2013 .

[406]  Andreas Greiner,et al.  Functional materials by electrospinning of polymers , 2013 .

[407]  Yanhang Zhang,et al.  Glucose suppresses biological ferroelectricity in aortic elastin. , 2013, Physical review letters.

[408]  D. Zhao,et al.  Large-pore ordered mesoporous materials templated from non-Pluronic amphiphilic block copolymers. , 2013, Chemical Society reviews.

[409]  Nicholas D. Petkovich,et al.  Controlling macro- and mesostructures with hierarchical porosity through combined hard and soft templating. , 2013, Chemical Society reviews.

[410]  Paul V Braun,et al.  High-power lithium ion microbatteries from interdigitated three-dimensional bicontinuous nanoporous electrodes , 2013, Nature Communications.

[411]  Yonggang Huang,et al.  High performance piezoelectric devices based on aligned arrays of nanofibers of poly(vinylidenefluoride-co-trifluoroethylene) , 2013, Nature Communications.

[412]  Justin D. Holmes,et al.  Ferroelectric nanoparticles, wires and tubes: synthesis, characterisation and applications , 2013 .

[413]  Jun Jiang,et al.  Nanostructured metal chalcogenides: synthesis, modification, and applications in energy conversion and storage devices. , 2013, Chemical Society reviews.

[414]  A. Stein,et al.  Design and functionality of colloidal-crystal-templated materials--chemical applications of inverse opals. , 2013, Chemical Society reviews.

[415]  J. Planell,et al.  High-resolution PLA-based composite scaffolds via 3-D printing technology. , 2013, Acta biomaterialia.

[416]  Sung Yun Chung,et al.  All‐Solution‐Processed Flexible Thin Film Piezoelectric Nanogenerator , 2012, Advanced materials.

[417]  B. Su,et al.  Hierarchically Structured Porous Materials for Energy Conversion and Storage , 2012 .

[418]  M. Beidaghi,et al.  Micro‐Supercapacitors Based on Interdigital Electrodes of Reduced Graphene Oxide and Carbon Nanotube Composites with Ultrahigh Power Handling Performance , 2012 .

[419]  J. Teuscher,et al.  Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites , 2012, Science.

[420]  T. A. Venkatesh,et al.  Effects of foam shape and porosity aspect ratio on the electromechanical properties of 3-3 piezoelectric foams , 2012 .

[421]  Chang Ming Li,et al.  Nanoporous metals: fabrication strategies and advanced electrochemical applications in catalysis, sensing and energy systems. , 2012, Chemical Society reviews.

[422]  I. Karaman,et al.  Processing and characterization of porous Ti2AlC with controlled porosity and pore size , 2012 .

[423]  Akira Izumi,et al.  Development of high capacity lithium-ion battery applying three-dimensionally patterned electrode , 2012 .

[424]  E. Thomas,et al.  Micro‐/Nanostructured Mechanical Metamaterials , 2012, Advanced materials.

[425]  Longmao Zhao,et al.  Hierarchical composite honeycombs , 2012 .

[426]  Andreas Stein,et al.  Porous Electrode Materials for Lithium‐Ion Batteries – How to Prepare Them and What Makes Them Special , 2012 .

[427]  A. Steckl,et al.  Nanofiber‐Based Bulk‐Heterojunction Organic Solar Cells Using Coaxial Electrospinning , 2012 .

[428]  Kang L. Wang,et al.  Room-temperature ferroelectricity in supramolecular networks of charge-transfer complexes , 2012, Nature.

[429]  Jing Liu,et al.  Architecture engineering of hierarchically porous chitosan/vacuum-stripped graphene scaffold as bioanode for high performance microbial fuel cell. , 2012, Nano letters.

[430]  J. Yang,et al.  Mechanical behavior of carbon fiber composite lattice core sandwich panels fabricated by laser cutting , 2012 .

[431]  Myounggu Park,et al.  Lithium‐Air Batteries: Survey on the Current Status and Perspectives Towards Automotive Applications from a Battery Industry Standpoint , 2012 .

[432]  Christopher M Wolverton,et al.  Electrical energy storage for transportation—approaching the limits of, and going beyond, lithium-ion batteries , 2012 .

[433]  Wei Yuan,et al.  Porous metal materials for polymer electrolyte membrane fuel cells – A review , 2012 .

[434]  M. Ge,et al.  Porous doped silicon nanowires for lithium ion battery anode with long cycle life. , 2012, Nano letters.

[435]  Bernhard Mueller,et al.  Additive Manufacturing Technologies – Rapid Prototyping to Direct Digital Manufacturing , 2012 .

[436]  T. A. Venkatesh,et al.  Electromechanical response of piezoelectric foams , 2012 .

[437]  Zhong Lin Wang,et al.  Flexible triboelectric generator , 2012 .

[438]  Yuyan Shao,et al.  Nanostructured carbon for energy storage and conversion , 2012 .

[439]  Christine Galez,et al.  Harmonic nanocrystals for biolabeling: a survey of optical properties and biocompatibility. , 2012, ACS nano.

[440]  Lei Zhang,et al.  A review of electrode materials for electrochemical supercapacitors. , 2012, Chemical Society reviews.

[441]  Eun Kyung Lee,et al.  Porous PVDF as effective sonic wave driven nanogenerators. , 2011, Nano letters.

[442]  B. Dunn,et al.  Electrical Energy Storage for the Grid: A Battery of Choices , 2011, Science.

[443]  Michael Grätzel,et al.  Porphyrin-Sensitized Solar Cells with Cobalt (II/III)–Based Redox Electrolyte Exceed 12 Percent Efficiency , 2011, Science.

[444]  Aifang Yu,et al.  An All‐Solid‐State Flexible Micro‐supercapacitor on a Chip , 2011 .

[445]  M. Mench,et al.  Redox flow batteries: a review , 2011 .

[446]  E. Dlugokencky,et al.  Non-CO2 greenhouse gases and climate change , 2011, Nature.

[447]  Julia R. Greer,et al.  Plasticity in small-sized metallic systems: Intrinsic versus extrinsic size effect , 2011 .

[448]  B. Grzybowski,et al.  The Mosaic of Surface Charge in Contact Electrification , 2011, Science.

[449]  T. Bein,et al.  Mesoporous Structures Confined in Anodic Alumina Membranes , 2011, Advanced materials.

[450]  Paul V. Braun,et al.  Three-dimensional bicontinuous ultrafast-charge and -discharge bulk battery electrodes. , 2011, Nature nanotechnology.

[451]  Yun Wang,et al.  A review of polymer electrolyte membrane fuel cells: Technology, applications,and needs on fundamental research , 2011 .

[452]  Han‐Ki Kim,et al.  Charge‐Generating Mode Control in High‐Performance Transparent Flexible Piezoelectric Nanogenerators , 2011 .

[453]  Chia-Ying Chen,et al.  Quantum Dot–Sensitized Solar Cells Featuring CuS/CoS Electrodes Provide 4.1% Efficiency , 2011 .

[454]  S. Nutt,et al.  Vitreous carbon micro-lattice structures , 2011 .

[455]  Bao-Lian Su,et al.  Self-formation phenomenon to hierarchically structured porous materials: design, synthesis, formation mechanism and applications. , 2011, Chemical communications.

[456]  Eric A Shaner,et al.  Reduction in the thermal conductivity of single crystalline silicon by phononic crystal patterning. , 2011, Nano letters.

[457]  Young-Jun Park,et al.  Sound‐Driven Piezoelectric Nanowire‐Based Nanogenerators , 2010, Advanced materials.

[458]  Juan Carlos Ruiz-Morales,et al.  Engineering of materials for solid oxide fuel cells and other energy and environmental applications , 2010 .

[459]  Yu Chen,et al.  Core/shell structured hollow mesoporous nanocapsules: a potential platform for simultaneous cell imaging and anticancer drug delivery. , 2010, ACS nano.

[460]  Galo J. A. A. Soler-Illia,et al.  One-Pot Synthesis of Hierarchically Structured Ceramic Monoliths with Adjustable Porosity , 2010 .

[461]  Yi Jia,et al.  Graphene‐On‐Silicon Schottky Junction Solar Cells , 2010, Advanced materials.

[462]  G. Zhu,et al.  Muscle‐Driven In Vivo Nanogenerator , 2010, Advanced materials.

[463]  R. Ruoff,et al.  Review of Best Practice Methods for Determining an Electrode Material's Performance for Ultracapacitors , 2010, 1005.0805.

[464]  Dukjoon Kim,et al.  Enhanced transport performance of sulfonated mesoporous benzene-silica incorporated poly(ether ether ketone) composite membranes for fuel cell application , 2010 .

[465]  Anders Hagfeldt,et al.  Dye-sensitized solar cells. , 2010, Chemical reviews.

[466]  Zhiyuan Gao,et al.  GaN nanowire arrays for high-output nanogenerators. , 2010, Journal of the American Chemical Society.

[467]  Yong Huang,et al.  Porous yttria-stabilized zirconia ceramics with ultra-low thermal conductivity , 2010 .

[468]  Norbert Fabre,et al.  Elaboration of a microstructured inkjet-printed carbon electrochemical capacitor , 2010 .

[469]  G. Jabbour,et al.  Inkjet Printing—Process and Its Applications , 2010, Advanced materials.

[470]  Francis Agyenim,et al.  A review of materials, heat transfer and phase change problem formulation for latent heat thermal energy storage systems (LHTESS) , 2010 .

[471]  王军波,et al.  Direct-Write Piezoelectric Polymeric Nanogenerator with High Energy Conversion Efficiency , 2010 .

[472]  J. Tollefson.  World looks ahead post-Copenhagen , 2009, Nature.

[473]  Richard G. Blair,et al.  Nanostructured Bulk Silicon as an Effective Thermoelectric Material , 2009 .

[474]  Xianzhi Fu,et al.  Hierarchical macro/mesoporous TiO2/SiO2 and TiO2/ZrO2 nanocomposites for environmental photocatalysis , 2009 .

[475]  Fuzhi Huang,et al.  Mesoporous Anatase TiO2 Beads with High Surface Areas and Controllable Pore Sizes: A Superior Candidate for High‐Performance Dye‐Sensitized Solar Cells , 2009 .

[476]  A. Falqui,et al.  Hierarchical Porous Silica Films with Ultralow Refractive Index , 2009 .

[477]  Tsutomu Miyasaka,et al.  Organometal halide perovskites as visible-light sensitizers for photovoltaic cells. , 2009, Journal of the American Chemical Society.

[478]  Andreas Stein,et al.  Functionalization of Porous Carbon Materials with Designed Pore Architecture , 2009 .

[479]  L. Archer,et al.  Hollow Micro‐/Nanostructures: Synthesis and Applications , 2008 .

[480]  Jin-Song Hu,et al.  Nanostructured Materials for Electrochemical Energy Conversion and Storage Devices , 2008 .

[481]  C. N. Lau,et al.  Superior thermal conductivity of single-layer graphene. , 2008, Nano letters.

[482]  J. Saja,et al.  Thermal conductivity of open‐cell polyolefin foams , 2008 .

[483]  Jingsong Huang,et al.  Theoretical model for nanoporous carbon supercapacitors. , 2008, Angewandte Chemie.

[484]  Guiling Wang,et al.  Direct carbon fuel cell: Fundamentals and recent developments , 2007 .

[485]  M. Dresselhaus,et al.  New Directions for Low‐Dimensional Thermoelectric Materials , 2007 .

[486]  Manuel Romero,et al.  Evaluation of porous silicon carbide monolithic honeycombs as volumetric receivers/collectors of concentrated solar radiation , 2007 .

[487]  J. Scott,et al.  Applications of Modern Ferroelectrics , 2007, Science.

[488]  P. Lacroix-Desmazes,et al.  TiO2 anatase-based membranes with hierarchical porosity and photocatalytic properties. , 2006, Journal of colloid and interface science.

[489]  Jinlong Yang,et al.  Piezoelectricity in ZnO nanowires: A first-principles study , 2006 .

[490]  M. Fröba,et al.  Silica-based mesoporous organic-inorganic hybrid materials. , 2006, Angewandte Chemie.

[491]  Zhong Lin Wang,et al.  Piezoelectric Nanogenerators Based on Zinc Oxide Nanowire Arrays , 2006, Science.

[492]  Peter Greil,et al.  Fabrication of Al2O3-based composites by indirect 3D-printing , 2006 .

[493]  W. Cai,et al.  Fabrication of the periodic nanopillar arrays by heat-induced deformation of 2D polymer colloidal monolayer , 2005 .

[494]  W. LaCourse,et al.  Application of photoassisted electrochemical detection to explosive-containing environmental samples. , 2005, Analytical chemistry.

[495]  S. Lang.  Pyroelectricity: From Ancient Curiosity to Modern Imaging Tool , 2005 .

[496]  Xianzhi Fu,et al.  Photocatalytic activity of a hierarchically macro/mesoporous titania. , 2005, Langmuir : the ACS journal of surfaces and colloids.

[497]  M. Winter,et al.  What are batteries, fuel cells, and supercapacitors? , 2004, Chemical reviews.

[498]  Amar M. Khudhair,et al.  A review on phase change energy storage: materials and applications , 2004 .

[499]  G. Yi,et al.  Electrospray‐Assisted Fabrication of Uniform Photonic Balls , 2004 .

[500]  U. Schubert,et al.  Inkjet Printing of Polymers: State of the Art and Future Developments , 2004 .

[501]  Ralph E.H. Sims,et al.  Carbon emission and mitigation cost comparisons between fossil fuel, nuclear and renewable energy resources for electricity generation , 2003 .

[502]  R. Ramesh,et al.  Epitaxial BiFeO3 Multiferroic Thin Film Heterostructures , 2003, Science.

[503]  Z. Wang.  Nanobelts, Nanowires, and Nanodiskettes of Semiconducting Oxides—From Materials to Nanodevices , 2003 .

[504]  Luisa F. Cabeza,et al.  Review on thermal energy storage with phase change: materials, heat transfer analysis and applications , 2003 .

[505]  R. Caruso.  Nanocasting and Nanocoating , 2003 .

[506]  Christopher W. Macosko,et al.  Image analysis for interfacial area and cocontinuity detection in polymer blends , 2002 .

[507]  D. Hutmacher,et al.  Scaffold development using 3D printing with a starch-based polymer , 2002 .

[508]  L. Janssen,et al.  The role of electrochemistry and electrochemical technology in environmental protection , 2002 .

[509]  N. Padture,et al.  Thermal conductivity of dense and porous yttria-stabilized zirconia , 2001 .

[510]  J. Banhart.  Manufacture, characterisation and application of cellular metals and metal foams , 2001 .

[511]  M. Ashby,et al.  The topological design of multifunctional cellular metals , 2001 .

[512]  S. Muensit,et al.  Extensional piezoelectric coefficients of gallium nitride and aluminum nitride , 1999 .

[513]  Yang Yang,et al.  Multicolor Organic Light-Emitting Diodes Processed by Hybrid Inkjet Printing** , 1999 .

[514]  E. Arzt.  Size effects in materials due to microstructural and dimensional constraints: a comparative review , 1998 .

[515]  T. Lu,et al.  Heat transfer in open-cell metal foams , 1998 .

[516]  K. Uchino,et al.  Crystal orientation dependence of piezoelectric properties of lead zirconate titanate near the morphotropic phase boundary , 1998 .

[517]  S. Stupp,et al.  Bulk synthesis of two-dimensional polymers. The molecular recognition approach , 1995 .

[518]  M. Grätzel,et al.  A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2 films , 1991, Nature.

[519]  H. Athenstaedt,et al.  Epidermis of human skin: pyroelectric and piezoelectric sensor layer. , 1982, Science.

[520]  E. Fukada,et al.  Piezoelectricity and ferroelectricity in polyvinylidene fluoride , 1981 .

[521]  W. P. Mason.  Piezoelectricity, its history and applications , 1980 .

[522]  J. Valasek.  Piezo-Electric and Allied Phenomena in Rochelle Salt , 1921 .