Development of an indirect stereolithography technology for scaffold fabrication with a wide range of biomaterial selectivity.

Tissue engineering, which is the study of generating biological substitutes to restore or replace tissues or organs, has the potential to meet current needs for organ transplantation and medical interventions. Various approaches have been attempted to apply three-dimensional (3D) solid freeform fabrication technologies to tissue engineering for scaffold fabrication. Among these, the stereolithography (SL) technology not only has the highest resolution, but also offers quick fabrication. However, a lack of suitable biomaterials is a barrier to applying the SL technology to tissue engineering. In this study, an indirect SL method that combines the SL technology and a sacrificial molding process was developed to address this challenge. A sacrificial mold with an inverse porous shape was fabricated from an alkali-soluble photopolymer by the SL technology. A sacrificial molding process was then developed for scaffold construction using a variety of biomaterials. The results indicated a wide range of biomaterial selectivity and a high resolution. Achievable minimum pore and strut sizes were as large as 50 and 65 μm, respectively. This technology can also be used to fabricate three-dimensional organ shapes, and combined with traditional fabrication methods to construct a new type of scaffold with a dual-pore size. Cytotoxicity tests, as well as nuclear magnetic resonance and gel permeation chromatography analyses, showed that this technology has great potential for tissue engineering applications.

[1]  Dietmar W Hutmacher,et al.  Scaffold-based tissue engineering: rationale for computer-aided design and solid free-form fabrication systems. , 2004, Trends in biotechnology.

[2]  Malcolm N. Cooke,et al.  Use of stereolithography to manufacture critical-sized 3D biodegradable scaffolds for bone ingrowth. , 2003, Journal of biomedical materials research. Part B, Applied biomaterials.

[3]  Margam Chandrasekaran,et al.  Rapid prototyping in tissue engineering: challenges and potential. , 2004, Trends in biotechnology.

[4]  B Derby,et al.  Novel collagen scaffolds with predefined internal morphology made by solid freeform fabrication. , 2003, Biomaterials.

[5]  A Giunti,et al.  Poly-epsilon-caprolactone/hydroxyapatite composites for bone regeneration: in vitro characterization and human osteoblast response. , 2006, Journal of biomedical materials research. Part A.

[6]  Nicholas X. Fang,et al.  Projection micro-stereolithography using digital micro-mirror dynamic mask , 2005 .

[7]  M. Vallet‐Regí,et al.  Hydroxyapatite/β-tricalcium phosphate/agarose macroporous scaffolds for bone tissue engineering , 2008 .

[8]  Mangirdas Malinauskas,et al.  3D artificial polymeric scaffolds for stem cell growth fabricated by femtosecond laser , 2010 .

[9]  Arnold Gillner,et al.  Fabrication of 2D protein microstructures and 3D polymer–protein hybrid microstructures by two-photon polymerization , 2011, Biofabrication.

[10]  Il Keun Kwon,et al.  Photo-polymerized microarchitectural constructs prepared by microstereolithography (muSL) using liquid acrylate-end-capped trimethylene carbonate-based prepolymers. , 2005, Biomaterials.

[11]  Dong-Woo Cho,et al.  3D scaffold fabrication with PPF/DEF using micro-stereolithography , 2007 .

[12]  Thomas J Webster,et al.  Three-dimensional, nano-structured PLGA scaffolds for bladder tissue replacement applications. , 2005, Biomaterials.

[13]  Lin Lu,et al.  Porogen-based solid freeform fabrication of polycaprolactone-calcium phosphate scaffolds for tissue engineering. , 2006, Biomaterials.

[14]  Dong-Woo Cho,et al.  Fabrication of a SFF-based three-dimensional scaffold using a precision deposition system in tissue engineering , 2008 .

[15]  A Ranella,et al.  Direct laser writing of 3D scaffolds for neural tissue engineering applications , 2011, Biofabrication.

[16]  Dong-Woo Cho,et al.  Effect of Thermal Degradation of SFF-Based PLGA Scaffolds Fabricated Using a Multi-head Deposition System Followed by Change of Cell Growth Rate , 2010, Journal of biomaterials science. Polymer edition.

[17]  Thomas J Webster,et al.  Nano-structured polymers enhance bladder smooth muscle cell function. , 2003, Biomaterials.

[18]  Thomas J Webster,et al.  Nanostructured polymer/nanophase ceramic composites enhance osteoblast and chondrocyte adhesion. , 2002, Tissue engineering.

[19]  P H Krebsbach,et al.  Indirect solid free form fabrication of local and global porous, biomimetic and composite 3D polymer-ceramic scaffolds. , 2003, Biomaterials.

[20]  Dong-Woo Cho,et al.  Application of microstereolithography in the development of three-dimensional cartilage regeneration scaffolds , 2008, Biomedical microdevices.

[21]  R Langer,et al.  Surface hydrolysis of poly(glycolic acid) meshes increases the seeding density of vascular smooth muscle cells. , 1998, Journal of biomedical materials research.

[22]  D. Lobner,et al.  In vitro neuronal cytotoxicity of latex and nonlatex orthodontic elastics. , 2004, American journal of orthodontics and dentofacial orthopedics : official publication of the American Association of Orthodontists, its constituent societies, and the American Board of Orthodontics.

[23]  S. Zissi,et al.  Microstereophotolithography using a liquid crystal display as dynamic mask-generator , 1997 .

[24]  Dong-Woo Cho,et al.  Development of an Assembly-free Process Based on Virtual Environment for Fabricating 3D Microfluidic Systems Using Microstereolithography Technology , 2004 .

[25]  R. Gurny,et al.  Injection-molding versus extrusion as manufacturing technique for the preparation of biodegradable implants. , 1999, European journal of pharmaceutics and biopharmaceutics : official journal of Arbeitsgemeinschaft fur Pharmazeutische Verfahrenstechnik e.V.

[26]  E. Sachlos,et al.  The impact of critical point drying with liquid carbon dioxide on collagen-hydroxyapatite composite scaffolds. , 2008, Acta biomaterialia.

[27]  T. Webster,et al.  Decreased fibroblast and increased osteoblast adhesion on nanostructured NaOH-etched PLGA scaffolds , 2007, International journal of nanomedicine.

[28]  G. Stevens,et al.  Controllable surface modification of poly(lactic-co-glycolic acid) (PLGA) by hydrolysis or aminolysis I: physical, chemical, and theoretical aspects. , 2004, Biomacromolecules.

[29]  Scott J Hollister,et al.  Mechanical and in vivo performance of hydroxyapatite implants with controlled architectures. , 2002, Biomaterials.

[30]  Robert Liska,et al.  Water-soluble photopolymers for rapid prototyping of cellular materials , 2005 .

[31]  Eleftherios Sachlos,et al.  Interaction of human valve interstitial cells with collagen matrices manufactured using rapid prototyping. , 2006, Biomaterials.

[32]  Dong-Woo Cho,et al.  Projection image-generation algorithm for fabrication of a complex structure using projection-based microstereolithography , 2012 .

[33]  K. Ikuta,et al.  Submicron stereolithography for the production of freely movable mechanisms by using single-photon polymerization , 2002 .

[34]  Jennifer L. West,et al.  Three-dimensional micropatterning of bioactive hydrogels via two-photon laser scanning photolithography for guided 3D cell migration. , 2008, Biomaterials.

[35]  J. Tanaka,et al.  Preparation and mechanical properties of calcium phosphate/copoly-L-lactide composites , 1997, Journal of materials science. Materials in medicine.

[36]  S. Hollister,et al.  Optimal design and fabrication of scaffolds to mimic tissue properties and satisfy biological constraints. , 2002, Biomaterials.

[37]  N. Kotov,et al.  Three-dimensional cell culture matrices: state of the art. , 2008, Tissue engineering. Part B, Reviews.

[38]  Benjamin M. Wu,et al.  Scaffold fabrication by indirect three-dimensional printing. , 2005, Biomaterials.

[39]  Satoshi Kawata,et al.  Finer features for functional microdevices , 2001, Nature.

[40]  D. Cho,et al.  Effects of combined mechanical stimulation on the proliferation and differentiation of pre-osteoblasts , 2011, Experimental & Molecular Medicine.

[41]  A. Göpferich,et al.  Why degradable polymers undergo surface erosion or bulk erosion. , 2002, Biomaterials.