Multi-objective optimisation of functionally graded honeycomb filled crash boxes under oblique impact loading

Tubular forms of crash elements such as crash boxes are widely applied in transportation industries, especially in automobile industry. A crash box is an element used in the frontal crash zones, generally inserted between chassis and bumper to reduce the amount of crash energy that is transmitted to the rest of the front safety zones. In this paper, first, square section crash boxes filled with functionally graded honeycomb (FGH) subjected to oblique impact loading is presented with the objective to improve crashworthiness. Then, some optimisation tools such as the weighted average method, the geometrical average method, and multi-design objective optimisation technique are utilised to optimise the crash box structures. The optimisation results reveal that the crashworthiness of the FGH filled box structures exposed to the oblique impact loading is improved, and also proves its superiority with respect to the uniform honeycomb filled box structures. Finally, the metallic honeycomb density exponent gradient is properly determined.

[1]  Qing Li,et al.  Optimization of foam-filled bitubal structures for crashworthiness criteria , 2012 .

[2]  O. Hopperstad,et al.  Static and dynamic crushing of square aluminium extrusions with aluminium foam filler , 2000 .

[3]  Wei Li,et al.  Multiobjective optimization of multi-cell sections for the crashworthiness design , 2008 .

[4]  Shu Yang,et al.  Multiobjective optimization for empty and foam-filled square columns under oblique impact loading , 2013 .

[5]  O. Hopperstad,et al.  Validation of constitutive models applicable to aluminium foams , 2002 .

[6]  Azim Eskandarian,et al.  Finite element model and validation of a surrogate crash test vehicle for impacts with roadside objects , 1997 .

[7]  Bertan Bayram,et al.  The effect of geometrical parameters on the energy absorption characteristics of thin-walled structures under axial impact loading , 2010 .

[8]  David C. Dunand,et al.  Mechanical properties of a density-graded replicated aluminum foam , 2008 .

[9]  Michael D. Gilchrist,et al.  Designing the energy absorption capacity of functionally graded foam materials , 2009 .

[10]  H. Zarei,et al.  Optimum honeycomb filled crash absorber design , 2008 .

[11]  Qing Li,et al.  Crashing analysis and multiobjective optimization for thin-walled structures with functionally graded thickness , 2014 .

[12]  David P. Thambiratnam,et al.  Dynamic energy absorption characteristics of foam-filled conical tubes under oblique impact loading , 2010 .

[13]  A. Hamouda,et al.  Design of thin wall structures for energy absorption applications: Enhancement of crashworthiness due to axial and oblique impact forces , 2013 .

[14]  P. Papalambros,et al.  A NOTE ON WEIGHTED CRITERIA METHODS FOR COMPROMISE SOLUTIONS IN MULTI-OBJECTIVE OPTIMIZATION , 1996 .

[15]  B. Kiebacka,et al.  Processing techniques for functionally graded materials , 2003 .

[16]  Mustafa Güden,et al.  The strengthening effect of polystyrene foam filling in aluminum thin-walled cylindrical tubes , 2005 .

[17]  O. Hopperstad,et al.  Square aluminum tubes subjected to oblique loading , 2003 .

[18]  G. G. Wang,et al.  Adaptive Response Surface Method Using Inherited Latin Hypercube Design Points , 2003 .

[19]  N. Gupta,et al.  Analysis of a functionally graded particulate composite under flexural loading conditions , 2008 .

[20]  Qing Li,et al.  Multiobjective optimization for crash safety design of vehicles using stepwise regression model , 2008 .

[21]  Zhibin Li,et al.  Deformation and energy absorption of aluminum foam-filled tubes subjected to oblique loading , 2012 .

[22]  Jie Song.  Numerical simulation on windowed tubes subjected to oblique impact loading and a new method for the design of obliquely loaded tubes , 2013 .

[23]  Shiwei Zhou,et al.  Crashworthiness design for functionally graded foam-filled thin-walled structures , 2010 .

[24]  B. Kieback,et al.  Processing techniques for functionally graded materials , 2003 .