Self-propagating high-temperature synthesis of LaMO3 perovskite-type oxide using heteronuclearcyano metal complex precursors

[1]  J. Farjas,et al.  Thermal gradients in thermal analysis experiments: Criterions to prevent inaccuracies when determining sample temperature and kinetic parameters , 2014 .

[2]  Chunyu Zhu,et al.  Solution combustion synthesis of LaMO3 (M = Fe, Co, Mn) perovskite nanoparticles and the measurement of their electrocatalytic properties for air cathode , 2013 .

[3]  N. Mestres,et al.  Thermal analysis for low temperature synthesis of oxide thin films from chemical solutions , 2013 .

[4]  F. Imbert,et al.  Fundamentals, properties and applications of solid catalysts prepared by solution combustion synthesis (SCS) , 2013 .

[5]  T. Akiyama,et al.  Self-propagating high-temperature synthesis with post-heat treatment of La1-xSrxFeO3 (x = 0-1) perovskite as catalyst for soot combustion , 2009 .

[6]  T. Akiyama,et al.  Self-propagating high-temperature synthesis of Sr-doped LaMnO3 perovskite as oxidation catalyst , 2007 .

[7]  A. Martínez-Arias,et al.  Surface properties and catalytic performance of La1−xSrxCrO3 perovskite-type oxides for CO and C3H6 combustion , 2006 .

[8]  L. Cadús,et al.  Synthesis and characterisation of La1−xCaxFeO3 perovskite-type oxide catalysts for total oxidation of volatile organic compounds , 2006 .

[9]  S. Kaliaguine,et al.  Effect of the synthesis conditions on the redox and catalytic properties in oxidation reactions of LaCo1−xFexO3 , 2005 .

[10]  E. Traversa,et al.  Design of ceramic materials for chemical sensors : Effect of SmFeO3 processing on surface and electrical properties , 2004 .

[11]  C. Au,et al.  The relationship of structural defect-redox property-catalytic performance of perovskites and their related compounds for CO and NOx removal , 2004 .

[12]  Vito Specchia,et al.  Combustion synthesis of perovskite-type catalysts for natural gas combustion , 2003 .

[13]  D. Das,et al.  Thermochemistry of La2O2CO3 decomposition , 2003 .

[14]  S T Aruna,et al.  COMBUSTION SYNTHESIS: AN UPDATE , 2002 .

[15]  D. Luss,et al.  A new route to synthesize La1−xSrxMnO3 , 2000 .

[16]  R. J. Bell,et al.  Influence of synthesis route on the catalytic properties of La1−xSrxMnO3 , 2000 .

[17]  E. Traversa,et al.  Thermal evolution of nanosized LaFeO3 powders from a heteronuclear complex, La[Fe(CN)6]·nH2O , 1998 .

[18]  E. Traversa,et al.  Synthesis and Structural Characterization of Trimetallic Perovskite-Type Oxides, LaFexCo1−xO3, by the Thermal Decomposition of Cyano Complexes, La[FexCo1−x(CN6)]·nH2O , 1998 .

[19]  G. Martinelli,et al.  Thermal evolution of the microstructure of nanosized LaFeO_3 powders from the thermal decomposition of a heteronuclear complex, La[Fe(CN)_6] · 5H_2O , 1998 .

[20]  E. Traversa,et al.  Preparation of Perovskite-Type Oxides by the Thermal Decomposition of Heteronuclear Complexes, Ln[FexCo1-x(CN)6]⋅4H2O (Ln=Pr-Yb) , 1997 .

[21]  E. Traversa,et al.  Preparation and structural characterization of perovskite-type LaxLn1−x″CoO3 by the thermal decomposition of heteronuclear complexes, LaxLn1−x″| Co(CN)6| · nH2O (Ln″ Sm and Ho) , 1996 .

[22]  E. Traversa,et al.  Preparation and Characterization of Heteronuclear Hexacyano Complexes, LnxSm1−x[Co(CN)6]·nH2O (Ln = La, Er, and Yb) , 1996 .

[23]  Y. Teraoka,et al.  Simultaneous catalytic removal of nitrogen oxides and diesel soot particulate over perovskite-related oxides , 1996 .

[24]  E. Traversa,et al.  NO2 sensitive LaFeO3 thin films prepared by r.f. sputtering , 1995 .

[25]  Wolfgang Göpel,et al.  Electrodes for oxygen sensors based on rate earth manganites or cabaltites , 1993 .

[26]  M. Post,et al.  Thin films of non-stoichiometric perovskites as potential oxygen sensors , 1993 .

[27]  N. Minh.  Ceramic Fuel Cells , 1993 .

[28]  R. Doshi,et al.  Perovskite electrodes for sensors , 1992 .

[29]  J. Lukaszewicz.  Diode-type humidity sensor using perovskite-type oxides operable at room temperature , 1991 .

[30]  D. C. Nelson,et al.  Thermal runaway by thermal analysis , 1990 .

[31]  K. Eguchi,et al.  Low‐Temperature Operation of Solid Electrolyte Oxygen Sensors Using Perovskite‐Type Oxide Electrodes and Cathodic Reaction Kinetics , 1990 .

[32]  J. Shiokawa,et al.  CO gas sensitivities of reduced perovskite oxide LaCoO3 − x☆ , 1988 .

[33]  Y. Shimizu,et al.  INVESTIGATION ON A LEAN-BURN OXYGEN SENSOR USING PEROVSKITE-TYPE OXIDES , 1986 .

[34]  Yasuhiro Shimizu,et al.  Enhancement of humidity sensitivity for Perovskite-type oxides having semiconductivity. , 1985 .

[35]  H. Kurachi,et al.  Physicochemical properties of rare earth perovskite oxides used as gas sensor material , 1985 .

[36]  Yuzuru Takahashi,et al.  Effect of CO oxidation on electrical properties of (La0.8Sr0.2)FeO3 , 1984 .

[37]  K. Kakegawa,et al.  Pyroelectricity of Preferably-Oriented Pb5Ge3-xSixO11 Thick Films Prepared by the Printing Technique , 1984 .

[38]  P. K. Gallagher,et al.  The nature and effects of platinum in perovskite catalysts , 1977 .

[39]  O. Hougen.  Diffusion and Heat Exchange in Chemical Kinetics. , 1956 .

[40]  K. Morsi.  The diversity of combustion synthesis processing: a review , 2011, Journal of Materials Science.

[41]  A. G. Merzhanov,et al.  History and recent developments in SHS , 1995 .

[42]  H. Yasuda,et al.  Oxidation of carbon monoxide on LaMn1 –xCuxO3 perovskite-type mixed oxides , 1994 .

[43]  M. Sakamoto,et al.  NO2-sensitive LaFeO3film prepared by thermal decomposition of the heteronuclear complex, {La[Fe(CN)6]·5H2O}x , 1993 .

[44]  Y. Teraoka,et al.  Catalytic Activity of Perovskite-Type Oxides for the Direct Decomposition of Nitrogen Monoxide , 1990 .