论文信息 - Fabrication Preparation of ITER Vacuum Vessel—Material Considerations, Regulatory Requirements, and Fabrication Plans

Fabrication Preparation of ITER Vacuum Vessel—Material Considerations, Regulatory Requirements, and Fabrication Plans

Abstract SS 316 L(N)-IG (ITER grade) has been selected as the main structural material for the ITER vacuum vessel (VV), considering its high mechanical strength at operating temperatures, water chemistry properties, excellent fabrication characteristics, and low cost relative to other candidates. The ITER VV is a class-2 box structure as defined in RCC-MR, 2007 edition, which was selected as the code for the design and construction. This paper describes materials, applied code and regulatory requirements, baseline fabrication procedures, and assembly on the site.

[1] K. Ioki,et al. Design analysis of the hinge support for the ITER vacuum vessel , 2011 .

[2] K. Ioki,et al. Design and Material Selection for ITER First Wall/Blanket, Divertor and Vacuum Vessel , 1998 .

[3] Mikio Enoeda,et al. ITER vacuum vessel, in-vessel components and plasma facing materials , 2008 .

[4] Marcello Losasso,et al. European preparations for the ITER VV sectors manufacture , 2011 .

[5] M. Onozuka,et al. Design and Development of the ITER Vacuum Vessel , 1998 .

[6] André Weyn,et al. Conformity Assessment of the ITER Vacuum Vessel With the Requirements of the French Order for Nuclear Pressure Equipment , 2010 .

[7] Jože Duhovnik,et al. Results from ITER vacuum vessel sector manufacturing development in Europe , 2007 .