Resistance spot welding of 6061-T6 aluminum: Failure loads and deformation

Abstract This study offers a novel research approach to compare weld quality for different welding conditions in order to achieve optimal end-product results. Using electron back scatter diffraction (EBSD) scanning, tensile testing, and laser beam profilometry (LBP) measurements along with optical microscopy (OM) images, failure loads and deformation of 6061-T6 aluminum alloy, resistance spot welded (RSW) joints were experimentally investigated. Three welding conditions, nugget and microstructure characteristics were quantified according to predefined process parameters. Quasi-static tensile tests were used to characterize the failure loads in specimens based upon these same process parameters. Profilometer results showed that the larger the applied welding current, the deeper the weld imprints. In addition, good correlation was obtained between the EBSD scans and the welding conditions. A strong dependency was found between the grain size and orientation and the welding parameters.

[1]  Jamil A. Khan,et al.  Numerical Simulation of Resistance Spot Welding Process , 2000 .

[2]  M. Horstemeyer,et al.  Comparison of corrosion pitting under immersion and salt-spray environments on an as-cast AE44 magnesium alloy , 2010 .

[3]  N. T. Williams,et al.  Review of resistance spot welding of steel sheets Part 2 Factors influencing electrode life , 2004 .

[4]  Mohsen Hamedi,et al.  New parametric study of nugget size in resistance spot welding process using finite element method , 2010 .

[5]  Xin Sun,et al.  Analysis of aluminum resistance spot welding processes using coupled finite element procedures , 2000 .

[6]  W. Misiolek,et al.  Surface grain structure evolution in hot rolling of 6061 aluminum alloy , 2009 .

[7]  Ugur Ozsarac,et al.  Welding time effect on mechanical properties of automotive sheets in electrical resistance spot welding , 2008 .

[8]  Hugh W. Coleman,et al.  Experimentation, Validation, and Uncertainty Analysis for Engineers , 2009 .

[9]  Jamil A. Khan,et al.  Prediction of nugget development during resistance spot welding using coupled thermal–electrical–mechanical model , 1999 .

[10]  Roger B. Hirsch.  Making resistance spot welding safer , 2007 .

[11]  Keith D. Weiss,et al.  Paint and coatings : A mature industry in transition , 1997 .

[12]  Eric Feulvarch,et al.  Resistance spot welding simulation: a general finite element formulation of electrothermal contact conditions , 2004 .

[13]  Michael Rethmeier,et al.  Deformation behaviour of spot-welded high strength steels for automotive applications , 2010 .

[14]  N. T. Williams,et al.  Review of resistance spot welding of steel sheets Part 1 Modelling and control of weld nugget formation , 2004 .

[15]  Min Jou.  Experimental Investigation of Resistance Spot Welding for Sheet Metals Used in Automotive Industry , 2001 .