论文信息 - Life tests on elastomeric lip seals for pneumatic cylinders

Life tests on elastomeric lip seals for pneumatic cylinders

A test method and a testing machine for evaluating the wear of lip seals for pneumatic cylinders are presented. The method and the machine have been evaluated with tests on different types of seals for cylinders with a 50 mm bore. Three levels of lubrication condition were examined: dry, with a film of grease, and with an optimum amount of grease. Differences were noted both between these conditions of lubrication, and between types of seal. © Leaf Coppin 1997.

Terenziano Raparelli | Guido Belforte | Luigi Mazza

[1] K. M. Marshek,et al. An equation for the abrasive wear of elastomeric O-ring materials , 1982 .

[2] Terenziano Raparelli,et al. Effect of mounting tolerances on pneumatic cylinders lip seal friction forces , 1994 .

[3] L. Keer,et al. Simulation of Wear Particle Creation in Asperity Contacts Using the Finite Element Method , 1993 .

[4] J.W.M. Mens,et al. Friction and wear behaviour of 18 polymers in contact with steel in environments of air and water , 1991 .

[5] The effect of electrospark hardening on the wear resistance of high speed steel , 1981 .

[6] Terenziano Raparelli,et al. Analysis of typical compoenent failure situations for pneumatic cylinders under load , 1992 .