Mechanism and feasibility study of low frequency vibration assisted drilling of a newly developed CFRP/Al co-cured material

[1]  Xinggang Jiang,et al.  The interface temperature and its influence on surface integrity in ultrasonic-assisted drilling of CFRP/Ti stacks , 2021 .

[2]  Guangyao Li,et al.  Effect of locking mode on mechanical properties and failure behavior of CFRP/Al electromagnetic riveted joint , 2021 .

[3]  Qing Li,et al.  On failure mechanisms in CFRP/Al adhesive joints after hygrothermal aging degradation following by mechanical tests , 2021 .

[4]  Ming Chen,et al.  Investigation on the cutting responses of CFRP/Ti stacks: With special emphasis on the effects of drilling sequences , 2020 .

[5]  B. Karpuschewski,et al.  Influence of the workpiece material on the cutting performance in low frequency vibration assisted drilling , 2020 .

[6]  C. Ren,et al.  Effects of axial and longitudinal-torsional vibration on fiber removal in ultrasonic vibration helical milling of CFRP composites , 2020 .

[7]  Sagil James,et al.  Investigation of shear failure load in ultrasonic additive manufacturing of 3D CFRP/Ti structures , 2020 .

[8]  Yong Jie Zhao,et al.  Damage behaviors of unidirectional CFRP in orthogonal cutting: A comparison between single- and multiple-pass strategies , 2020 .

[9]  M. Mansori,et al.  On the analysis of temperatures, surface morphologies and tool wear in drilling CFRP/Ti6Al4V stacks under different cutting sequence strategies , 2020 .

[10]  Ming Chen,et al.  Hole quality and tool wear when dry drilling of a new developed metal/composite co-cured material , 2020 .

[11]  A. Caggiano,et al.  Roughness of composite materials: characterization of hole quality in drilling of Al/CFRP stacks. , 2020 .

[12]  Jiu-hua Xu,et al.  Chip Control Analysis in Low-Frequency Vibration-Assisted Drilling of Ti–6Al–4V Titanium Alloys , 2020 .

[13]  Ming Chen,et al.  Experimental investigation on mechanical drilling of a newly developed CFRP/Al co-cured material , 2020 .

[14]  Ming Chen,et al.  Experimental investigation on the cutting mechanism and surface generation in orthogonal cutting of UD-CFRP laminates , 2019, Composite Structures.

[15]  Jiu-hua Xu,et al.  Drilling force model for forced low frequency vibration assisted drilling of Ti-6Al-4V titanium alloy , 2019, International Journal of Machine Tools and Manufacture.

[16]  M. Mansori,et al.  On the interpretation of drilling CFRP/Ti6Al4V stacks using the orthogonal cutting method: Chip removal mode and subsurface damage formation , 2019, Journal of Manufacturing Processes.

[17]  Xinggang Jiang,et al.  Experimental study on drilling load and hole quality during rotary ultrasonic helical machining of small-diameter CFRP holes , 2019, Journal of Materials Processing Technology.

[18]  C. Li,et al.  Tool wear processes in low frequency vibration assisted drilling of CFRP/Ti6Al4V stacks with forced air-cooling , 2019, Wear.

[19]  L. Romoli,et al.  Quality monitoring and control for drilling of CFRP laminates , 2019, Journal of Manufacturing Processes.

[20]  Jiu-hua Xu,et al.  Evaluation of CFRP Hole Quality in Low Frequency Vibration-Assisted Dry Drilling of CFRP/Ti Stacks , 2018, Volume 4: Processes.

[21]  Q. An,et al.  Thermal characteristics of unidirectional carbon fiber reinforced polymer laminates during orthogonal cutting , 2018 .

[22]  Ken Chen,et al.  Investigation on the non-coaxiality in the drilling of carbon-fibre-reinforced plastic and aluminium stacks , 2018 .

[23]  A. Zucchelli,et al.  Design and manufacture of hybrid aluminum/composite co-cured tubes with viscoelastic interface layer , 2018 .

[24]  Michela Simoncini,et al.  Tool wear and hole quality in drilling of CFRP/AA7075 stacks with DLC and nanocomposite TiAlN coated tools , 2017 .

[25]  C. Kuo,et al.  Multi-objective optimisation in vibration-assisted drilling of CFRP/Al stacks , 2017 .

[26]  Ming Chen,et al.  Occurrence and formation mechanism of surface cavity defects during orthogonal milling of CFRP laminates , 2017 .

[27]  Ming Chen,et al.  Study on the cutting mechanics characteristics of high-strength UD-CFRP laminates based on orthogonal cutting method , 2015 .

[28]  Weiwei Ming,et al.  Drilling temperature and hole quality in drilling of CFRP/aluminum stacks using diamond coated drill , 2015 .

[29]  Gérard Poulachon,et al.  CFRP drilling: Fundamental study of local feed force and consequences on hole exit damage , 2015 .

[30]  Kotresh M. Gaddikeri,et al.  Challenges in Processing of a Cocured Wing Test Box Using Vacuum Enhanced Resin Infusion Technology (VERITy) , 2014 .

[31]  Jiancheng Fang,et al.  Superconducting Magnetic Bearings and Active Magnetic Bearings in Attitude Control and Energy Storage Flywheel for Spacecraft , 2012, IEEE Transactions on Applied Superconductivity.

[32]  Han Bangcheng,et al.  Integral Design and Analysis of Passive Magnetic Bearing and Active Radial Magnetic Bearing for Agile Satellite Application , 2012, IEEE Transactions on Magnetics.

[33]  Redouane Zitoune,et al.  Influence of machining parameters and new nano-coated tool on drilling performance of CFRP/Aluminium sandwich , 2012 .

[34]  F. C. Campbell.  Adhesive Bonding and Integrally Cocured Structure , 2006 .

[35]  P. Kascak,et al.  Integrated power and attitude control with two flywheels , 2005, IEEE Transactions on Aerospace and Electronic Systems.

[36]  F. C. Campbell.  Chapter 8 – Adhesive Bonding and Integrally Cocured Structure: A Way to Reduce Assembly Costs through Parts Integration , 2004 .