Channel Characterization and Wireless Communication Performance in Industrial Environments

The demand for wireless communication systems in industry has grown in recent years. Industrial wireless communications open up a number of new possibilities for highly flexible and efficient autom ...

[1]  Sergey V. Zhidkov,et al.  Analysis and comparison of several simple impulsive noise mitigation schemes for OFDM receivers , 2008, IEEE Transactions on Communications.

[2]  Pertti Vainikainen,et al.  Experimental Investigation of the Properties of Multiband UWB Propagation Channels , 2007, 2007 IEEE 18th International Symposium on Personal, Indoor and Mobile Radio Communications.

[3]  Moshe Kam,et al.  Echo-Cancellation for Ultrasonic Data Transmission through a Metal Channel , 2007, 2007 41st Annual Conference on Information Sciences and Systems.

[4]  A.M.D. Turkmani,et al.  An experimental evaluation of the performance of two-branch space and polarization diversity schemes at 1800 MHz , 1995 .

[5]  Jose Chilo,et al.  Impulsive noise detection in OFDM systems with PAPR reduction , 2014, 2014 International Symposium on Electromagnetic Compatibility.

[6]  D. Middleton,et al.  Man-Made Noise in Urban Environments and Transportation Systems: Models and Measurements , 1973, IEEE Trans. Commun..

[7]  K.C. Wiklundh.  An Approach to Using Amplitude Probability Distribution for Emission Limits to Protect Digital Radio Receivers Using Error-Correction Codes , 2010, IEEE Transactions on Electromagnetic Compatibility.

[8]  M. Sánchez,et al.  Impulsive noise measurements and characterization in a UHF digital TV channel , 1999 .

[9]  R. Bäuml,et al.  Reducing the peak-to-average power ratio of multicarrier modulation by selected mapping , 1996 .

[10]  Slimane Ben Slimane,et al.  Reducing the Peak-to-Average Power Ratio of OFDM Signals Through Precoding , 2007, IEEE Transactions on Vehicular Technology.

[11]  M. Itami,et al.  A Study on Iterative Impulse Noise Reduction in OFDM Signal by Recovering Time Domain Samples , 2006, 2006 IEEE International Symposium on Power Line Communications and Its Applications.

[12]  Fredrik Tufvesson,et al.  A Measurement-Based Statistical Model for Industrial Ultra-Wideband Channels , 2007, IEEE Transactions on Wireless Communications.

[13]  J. P. McGeehan,et al.  Direct calculation of coherence bandwidth in urban microcells using a ray-tracing propagation model , 1994, 5th IEEE International Symposium on Personal, Indoor and Mobile Radio Communications, Wireless Networks - Catching the Mobile Future..

[14]  R. O'Neill,et al.  Envelope variations and spectral splatter in clipped multicarrier signals , 1995, Proceedings of 6th International Symposium on Personal, Indoor and Mobile Radio Communications.

[15]  Sergey V. Zhidkov,et al.  Performance analysis and optimization of OFDM receiver with blanking nonlinearity in impulsive noise environment , 2006, IEEE Transactions on Vehicular Technology.

[16]  Fredrik Tufvesson,et al.  UWB channel measurements in an industrial environment , 2004, IEEE Global Telecommunications Conference, 2004. GLOBECOM '04..

[17]  R. Doebbelin,et al.  Cost-effective mitigation measures concerning conducted emission of resistance welding inverters , 2005, IEEE 6th International Symposium on Electromagnetic Compatibility and Electromagnetic Ecology, 2005..

[18]  P. Torio,et al.  Improving Capability of Detecting Impulsive Noise , 2013, IEEE Transactions on Electromagnetic Compatibility.

[19]  Larry J. Greenstein,et al.  UWB delay profile models for residential and commercial indoor environments , 2005, IEEE Transactions on Vehicular Technology.

[20]  U. Kumar,et al.  Railway EMI impact on train operation and environment , 2012, International Symposium on Electromagnetic Compatibility - EMC EUROPE.

[21]  Romano Fantacci,et al.  Impulse noise mitigation techniques for xDSL systems in a real environment , 2010, IEEE Transactions on Consumer Electronics.

[22]  Jose Chilo,et al.  Industrial indoor environment characterization - Propagation models , 2011, 10th International Symposium on Electromagnetic Compatibility.

[23]  Theodore S. Rappaport,et al.  Wireless communications - principles and practice , 1996 .

[24]  S. V. Zhidkov,et al.  Impulsive noise suppression in OFDM-based communication systems , 2003, IEEE Trans. Consumer Electron..

[25]  Per Ängskog,et al.  Antenna Cross Correlation and Ricean $$K$$K-Factor Measurements in Indoor Industrial Environments at 433 and 868 MHz , 2013, Wirel. Pers. Commun..

[26]  Jun Zhao,et al.  Comparison of IEEE 802.11e and IEEE 802.15.3 MAC , 2004, Proceedings of the IEEE 6th Circuits and Systems Symposium on Emerging Technologies: Frontiers of Mobile and Wireless Communication (IEEE Cat. No.04EX710).

[27]  Luc Martens,et al.  The industrial indoor channel: large-scale and temporal fading at 900, 2400, and 5200 MHz , 2008, IEEE Transactions on Wireless Communications.

[28]  Saleh M. Al-Qaraawy,et al.  UWB propagation indoor statistical channel modeling , 2009, 2009 ISECS International Colloquium on Computing, Communication, Control, and Management.

[29]  W. Ku,et al.  Analysis and Digital Realization of a Pseudorandom Gaussian and Impulsive Noise Source , 1975, IEEE Trans. Commun..

[30]  O. Staub,et al.  Indoor propagation and electromagnetic pollution in an industrial plant , 1997, Proceedings of the IECON'97 23rd International Conference on Industrial Electronics, Control, and Instrumentation (Cat. No.97CH36066).

[31]  H. A. Myers.  Industrial Equipment Spectrum Signatures , 1963 .

[32]  Wendy Van Moer,et al.  Automatic Detection, Estimation, and Validation of Harmonic Components in Measured Power Spectra: All-in-One Approach , 2011, IEEE Transactions on Instrumentation and Measurement.

[33]  Manuel García Sánchez,et al.  Coherence bandwidth characterization in an urban microcell at 62.4 GHz , 2000, IEEE Trans. Veh. Technol..

[34]  W. C. Jakes,et al.  Microwave Mobile Communications , 1974 .

[35]  Per Ängskog,et al.  Analysis of wireless communications in underground tunnels for industrial use , 2012, IECON 2012 - 38th Annual Conference on IEEE Industrial Electronics Society.

[36]  Hideki Ochiai,et al.  On the distribution of the peak-to-average power ratio in OFDM signals , 2001, IEEE Trans. Commun..

[37]  Suhas N. Diggavi,et al.  On achievable performance of spatial diversity fading channels , 1998, IEEE Trans. Inf. Theory.

[38]  S. Kjesbu,et al.  Radiowave propagation in industrial environments , 2000, 2000 26th Annual Conference of the IEEE Industrial Electronics Society. IECON 2000. 2000 IEEE International Conference on Industrial Electronics, Control and Instrumentation. 21st Century Technologies.

[39]  Robust Least Square Method and Its Application to Parameter Estimation , 2007, 2007 IEEE International Conference on Automation and Logistics.

[40]  H. Vincent Poor,et al.  Parameter estimation for Middleton Class A interference processes , 1989, IEEE Trans. Commun..

[41]  R. Shepherd.  Measurements of amplitude probability distributions and power of automobile ignition noise at HF , 1974 .

[42]  Ali Abdi,et al.  On the estimation of the K parameter for the Rice fading distribution , 2001, IEEE Communications Letters.

[43]  R. Clarke.  A statistical theory of mobile-radio reception , 1968 .

[44]  Jan Sijbers,et al.  Maximum-likelihood estimation of Rician distribution parameters , 1998, IEEE Transactions on Medical Imaging.

[45]  Alex Talevski,et al.  Comparison of industrial WSN standards , 2010, 4th IEEE International Conference on Digital Ecosystems and Technologies.

[46]  K. Gotoh,et al.  Development and Evaluation of a Prototype Multichannel APD Measuring Receiver , 2007, 2007 IEEE International Symposium on Electromagnetic Compatibility.

[47]  Carl Karlsson,et al.  Simulation and measurement of electromagnetic radiation absorption in a finished-product warehouse , 2010, 2010 IEEE International Symposium on Electromagnetic Compatibility.

[48]  Bo Ai,et al.  Propagation channel measurements and analysis at 2.4 GHz in subway tunnels , 2013 .

[49]  Norihiko Morinaga,et al.  A study on modeling of microwave oven interference and optimum reception , 1998, 1998 IEEE EMC Symposium. International Symposium on Electromagnetic Compatibility. Symposium Record (Cat. No.98CH36253).

[50]  S. H. Lin,et al.  Measured Frequency Diversity Improvement for Digital Radio , 1985, IEEE Trans. Commun..

[51]  Z.M. Hussain,et al.  Joint Time-domain/Frequency-domain Impulsive Noise Reduction in OFDM-based Power Line Communications , 2008, 2008 Australasian Telecommunication Networks and Applications Conference.

[52]  Edward J. Powers,et al.  Distribution of envelope power using selected mapping in OFDM systems with nonlinearity , 2008, 2008 IEEE International Conference on Acoustics, Speech and Signal Processing.

[53]  Andreas F. Molisch,et al.  Ultrawideband propagation channels-theory, measurement, and modeling , 2005, IEEE Transactions on Vehicular Technology.

[54]  V. Ricchiuti,et al.  Electromagnetic interferences on implantable medical devices onboard of high speed trains , 2006, 2006 IEEE International Symposium on Electromagnetic Compatibility, 2006. EMC 2006..

[55]  Yun-Ming Siu,et al.  PAPR reduction of an OFDM signal by use of PTS with low computational complexity , 2006, IEEE Transactions on Broadcasting.

[56]  L. Martens,et al.  Large-scale fading in industrial environments at wireless communication frequencies , 2007, 2007 IEEE Antennas and Propagation Society International Symposium.

[57]  Jae Hong Lee,et al.  An overview of peak-to-average power ratio reduction techniques for multicarrier transmission , 2005, IEEE Wireless Communications.

[58]  S. Promwong,et al.  Measurement and modeling of UWB path loss for single-band and multi-band propagation channel , 2005, IEEE International Symposium on Communications and Information Technology, 2005. ISCIT 2005..

[59]  T.S. Rappaport,et al.  Indoor radio communications for factories of the future , 1989, IEEE Communications Magazine.

[60]  Carl Karlsson,et al.  Sources of disturbances on wireless communication in industrial and factory environments , 2010, 2010 Asia-Pacific International Symposium on Electromagnetic Compatibility.

[61]  Ali Abdi,et al.  Performance analysis of moment-based estimators for the K parameter of the Rice fading distribution , 2001, 2001 IEEE International Conference on Acoustics, Speech, and Signal Processing. Proceedings (Cat. No.01CH37221).

[62]  A.V. Alejos,et al.  Interference and impairments in radio communication systems due to industrial shot noise , 2007, 2007 IEEE International Symposium on Industrial Electronics.

[63]  Slimane Ben Slimane,et al.  Detection and Suppression of Impulsive Noise in OFDM Receiver , 2015, Wirel. Pers. Commun..

[64]  Christopher L. Holloway,et al.  A model for predicting the power delay profile characteristics inside a room , 1999 .

[65]  Edward N. Skomal.  Comparative Radio Noise Levels of Transmission Lines, Automotive Traffic, and RF Stabilized Arc Welders , 1967 .

[66]  Gregory J. Pottie,et al.  Evaluation of personal communications dual-antenna handset diversity performance , 1998 .

[67]  Thiago Rodrigues Oliveira,et al.  HOS-based impulsive noise detection technique for power line communication systems , 2010, ISPLC2010.

[68]  Kohei Ohno,et al.  Improving of performance of OFDM reception under Class-A impulsive channel by replica signal estimation of impulse , 2012, 2012 IEEE International Conference on Consumer Electronics (ICCE).

[69]  Dmitry Chizhik.  Clutter height variation and its effect on frequency dependence of radio path loss , 2011, Proceedings of the 5th European Conference on Antennas and Propagation (EUCAP).

[70]  E. Gunawan,et al.  Analysis of impulsive noise and multipath effects on broadband power line communications , 2004, 2004 International Conference on Power System Technology, 2004. PowerCon 2004..

[71]  Per Ängskog,et al.  Characterisation of highly absorbent and highly reflective radio wave propagation environments in industrial applications , 2012, IET Commun..

[72]  David Middleton,et al.  Statistical-Physical Models of Electromagnetic Interference , 1977, IEEE Transactions on Electromagnetic Compatibility.

[73]  Lan truyền,et al.  Wireless Communications Principles and Practice , 2015 .

[74]  Slimane Ben Slimane.  Peak-to-average power ratio reduction of OFDM signals using broadband pulse shaping , 2002, Proceedings IEEE 56th Vehicular Technology Conference.

[75]  Tao Jiang,et al.  An Overview: Peak-to-Average Power Ratio Reduction Techniques for OFDM Signals , 2008, IEEE Transactions on Broadcasting.

[76]  W. Stutzman,et al.  Spatial, polarization, and pattern diversity for wireless handheld terminals , 2001 .

[77]  S. Affes,et al.  Radio-channel characterization of an underground mine at 2.4 GHz , 2005, IEEE Transactions on Wireless Communications.

[78]  Per Ängskog,et al.  Challenges and conditions for wireless machine-to-machine communications in industrial environments , 2013, IEEE Communications Magazine.

[79]  L. B. Milstein,et al.  Detection with spatial diversity using noisy channel estimates in a correlated fading channel , 2002, MILCOM 2002. Proceedings.

[80]  Manuel García Sánchez,et al.  Mitigation of impulsive noise in digital video broadcasting terrestrial using orthogonal polarization reception , 2009, IEEE Transactions on Consumer Electronics.

[82]  N. Blaunstein,et al.  Prediction of frequency dependence of path loss and link-budget design for various terrestrial communication links , 2004, IEEE Transactions on Antennas and Propagation.

[83]  Larry J. Greenstein,et al.  Moment-method estimation of the Ricean K-factor , 1999, IEEE Communications Letters.

[84]  Warren L. Stutzman,et al.  Indoor and outdoor measurements of space, polarization, and angle diversity for cellular base stations in urban environments , 2000, Vehicular Technology Conference Fall 2000. IEEE VTS Fall VTC2000. 52nd Vehicular Technology Conference (Cat. No.00CH37152).

[85]  A. Lindemann,et al.  Mitigation of Conducted Emission of Power Electronic Resistance Welding Equipment , 2006, 2006 12th International Power Electronics and Motion Control Conference.

[86]  Manuel García Sánchez,et al.  RMS delay and coherence bandwidth measurements in indoor radio channels in the UHF band , 2001, IEEE Trans. Veh. Technol..

[87]  A.A.M. Saleh,et al.  A Statistical Model for Indoor Multipath Propagation , 1987, IEEE J. Sel. Areas Commun..

[88]  M. Hata,et al.  Empirical formula for propagation loss in land mobile radio services , 1980, IEEE Transactions on Vehicular Technology.

[89]  Xiongwen Zhao,et al.  Empirical characterization of wideband indoor radio channel at 5.3 GHz , 2001 .

[90]  Yi Jiang,et al.  Antenna space diversity and polarization mismatch in wideband 60GHz-Millimeter-wave wireless system , 2009, 2009 IEEE 20th International Symposium on Personal, Indoor and Mobile Radio Communications.

[91]  J. F. Coll,et al.  Radio-Frequency Electromagnetic Characterization in Factory Infrastructures , 2012, IEEE Transactions on Electromagnetic Compatibility.

[92]  Felipe Espinosa,et al.  Modeling Radiated Electromagnetic Emissions of Electric Motorcycles in Terms of Driving Profile Using Mlp Neural Networks , 2013 .

[93]  Peter Russer,et al.  A novel multichannel amplitude probability distribution for a time-domain EMI measurement system according to CISPR 16-1-1 , 2011, 10th International Symposium on Electromagnetic Compatibility.