Frictional Heating and Contact Temperatures

[1]  F. F. Ling,et al.  THERMAL ASPECTS OF GALLING OF DRY METALLIC SURFACES IN SLIDING CONTACT. Technical Report No. 5 , 1955 .

[2]  Stephen M. Hsu,et al.  Ceramic Wear Maps: Zirconia , 1993 .

[3]  F. Kennedy,et al.  Thermo-mechanical analysis of dry sliding systems , 1987 .

[4]  M. Ashby,et al.  Temperature Maps for Frictional Heating in Dry Sliding , 1991 .

[5]  H. Tong,et al.  High‐temperature thin‐film Pt–Ir thermocouple with fast time response , 1987 .

[6]  Ward O. Winer,et al.  The thermal aspects of oxidational wear , 1985 .

[7]  J. W. Kannel,et al.  Thermomechanical effects in high current density electrical slip rings , 1982 .

[8]  B. Bhushan.  Magnetic Head-Media Interface Temperatures: Part 2—Application to Magnetic Tapes , 1987 .

[9]  J. K. Lancaster.  Estimation of the limiting PV relationships for thermoplastic bearing materials , 1971 .

[10]  D. Kuhlmann-Wilsdorf,et al.  Temperatures at Interfacial Contact Spots: Dependence on Velocity and on Role Reversal of Two Materials in Sliding Contact , 1987 .

[11]  F. P. Bowden,et al.  The mechanism of sliding on ice and snow , 1939 .

[12]  Seh Chun Lim,et al.  Overview no. 55 Wear-Mechanism maps , 1987 .

[13]  M. Furey.  Surface Temperatures in Sliding Contact , 1964 .

[14]  H. Spikes,et al.  Additive Interference in Dibenzyl Disulfide Extreme Pressure Lubrication , 1974 .

[15]  Paul K. Wright,et al.  Correlation of Tempering Effects With Temperature Distribution in Steel Cutting Tools , 1978 .

[17]  A. Dyson,et al.  Scuffing - a review , 1975 .

[18]  Francis E. Kennedy,et al.  Thermal and thermomechanical effects in dry sliding , 1984 .

[19]  J. Barber,et al.  The Division of Frictional Heat—A Guide to the Nature of Sliding Contact , 1984 .

[20]  S. M. Hsu,et al.  Ceramic wear maps , 1996 .

[21]  D. Play,et al.  Contact Temperature in Dry Bearings. Three Dimensional Theory and Verification , 1981 .

[22]  F. Kennedy,et al.  Maximum and Average Flash Temperatures in Sliding Contacts , 1994 .

[23]  F. E. Kennedy,et al.  The friction of ice on ice at low sliding velocities , 2000 .

[24]  R Marshall,et al.  The preparation and performance of thin film thermocouples , 1966 .

[25]  C. Ettles.  The Thermal Control of Friction at High Sliding Speeds , 1986 .

[26]  J. Bos,et al.  Frictional heating of tribological contacts , 1995 .

[27]  F. F. Ling.  A quasi-iterative method for computing interface temperature distributions , 1959 .

[28]  Francis E. Kennedy,et al.  Thin film thermocouple arrays for sliding surface temperature measurement , 1997 .

[29]  Francis E. Kennedy,et al.  Contact Surface Temperature Models for Finite Bodies in Dry and Boundary Lubricated Sliding , 1993 .

[30]  Bharat Bhushan,et al.  Measurements of Asperity Temperatures of a Read/Write Head Slider Bearing in Hard Magnetic Recording Disks , 1991 .

[31]  D. Rigney,et al.  Plastic deformation and sliding friction of metals , 1979 .

[32]  F. E. Kennedy,et al.  Single Pass Rub Phenomena—Analysis and Experiment , 1982 .

[33]  Sliding Surface Interface Temperatures , 1973 .

[34]  G. Boothroyd,et al.  Photographic technique for the determination of metal cutting temperatures , 1961 .

[35]  Ranga Komanduri,et al.  Magnetic Field Assisted Finishing of Ceramics—Part I: Thermal Model , 1998 .

[36]  D. Play,et al.  Surface Temperatures in Distributed Contacts. Application to Bearing Design , 1977 .

[37]  Bharat Bhushan.  Magnetic Head-Media Interface Temperatures—Part 3: Application to Rigid Disks , 1992 .

[38]  A. Floquet.  Thermal considerations in the design of tribometers , 1983 .

[39]  Francis E. Kennedy,et al.  The Detection of Flash Temperatures in a Sliding Contact by the Method of Tribo-Induced Thermoluminescence , 1991 .

[40]  J. F. Archard,et al.  The temperature of rubbing surfaces , 1959 .

[41]  J. Föhl,et al.  Wear as an energy transformation process , 1978 .

[42]  Juhani Keinonen,et al.  The mechanism of friction of ice , 1982 .

[43]  C. Ettles,et al.  The Influence of Frictional Heating on the Sliding Friction of Elastomers and Polymers , 1988 .

[44]  J. Barber,et al.  Implications of Thermoelastic Instability for the Design of Brakes , 1985 .

[45]  Ward O. Winer,et al.  Transient Temperatures in the Vicinity of an Asperity Contact , 1985 .

[46]  J. Greenwood.  An interpolation formula for flash temperatures , 1991 .

[47]  C. N. Rowe,et al.  Transition Temperatures in Sliding Systems , 1959 .

[48]  F. Kennedy,et al.  The Development and Use of Thin Film Thermocouples for Contact Temperature Measurement , 1992 .

[49]  H. Spikes,et al.  Temperature and Scuffing , 1993 .

[50]  A. Floquet,et al.  Combination of finite element and integral transform techniques in a heat conduction quasi‐static problem , 1986 .

[51]  Thin film thermocouple sensors for measurement of contact temperatures during slider asperity interaction on magnetic recording disks , 1992, 1992. Digests of Intermag. International Magnetics Conference.

[52]  O. Dinc,et al.  The effect of frictionally generated heat on lubricant transition , 1994 .

[53]  B. Bhushan.  Magnetic Head-Media Interface Temperatures: Part 1—Analysis , 1987 .

[54]  F. J. Carignan,et al.  Friction and Wear at High Sliding Speeds , 1980 .

[55]  S. J. Calabrese,et al.  Parameters Affecting the Kinetic Friction of Ice , 1987 .

[56]  Transient temperature of local moving areas of sliding contact , 1997 .

[57]  T. Quinn.  Review of oxidational wear: Part I: The origins of oxidational wear , 1983 .

[58]  R. C. Parker,et al.  The Measurement of the Temperature of Sliding Surfaces, with Particular Reference to Railway Brake Blocks: , 1948 .

[59]  L. Rozeanu,et al.  Two Temperature Gradients Model for Friction Failure , 1978 .