Threading holder based on axial metal cylinder pins to reduce tap risk during reversion instant

[1]  V. S. Aher,et al.  Performance analysis of cryoprocessed conventional HSS M2 drill and P/M HSS M3 TiN coated tap and its effect on the substructure , 2022, Materials Today: Proceedings.

[2]  L.N. López de Lacalle,et al.  A model-based sustainable productivity concept for the best decision-making in rough milling operations , 2021, Measurement.

[3]  L. N. López de Lacalle,et al.  Threading Performance of Different Coatings for High Speed Steel Tapping , 2020, Coatings.

[4]  M. Silva,et al.  An approach to torque and temperature thread by thread on tapping , 2020 .

[5]  L. N. López de Lacalle,et al.  Cutting edge control by monitoring the tapping torque of new and resharpened tapping tools in Inconel 718 , 2020 .

[6]  Sergio Luiz Moni Ribeiro Filho,et al.  Experimental investigation of tapping in CFRP with analysis of torque-tension resistance , 2019, The International Journal of Advanced Manufacturing Technology.

[7]  K. Monkova,et al.  Study of a tap failure at the internal threads machining , 2019, Engineering Failure Analysis.

[8]  L. Brandão,et al.  Influence of chip breaker and helix angle on cutting efforts in the internal threading process , 2019, The International Journal of Advanced Manufacturing Technology.

[9]  Igor Cézar Pereira,et al.  Study of the internal thread process with cut and form taps according to secondary characteristics of the process , 2017 .

[10]  Min Wan,et al.  Mechanics of tapping process with emphasis on measurement of feed error and estimation of its induced indentation forces , 2017 .

[11]  L. N. López de Lacalle,et al.  PVD coatings for thread tapping of austempered ductile iron , 2017 .

[12]  M. Silva,et al.  Analysis of tapping process in three types of cast iron , 2016 .

[13]  L. N. López de Lacalle,et al.  Wear of Form Taps in Threading of Steel Cold Forged Parts , 2015 .

[14]  I. Korkut,et al.  The effect of cryogenic treatment on tapping , 2013 .

[15]  A. Gil Del Val,et al.  Monitoring of thread quality when tapping nodular cast iron with TiN-coated HSS cutting taps , 2013 .

[16]  Francisco J. Campa,et al.  Stability prediction in straight turning of a flexible workpiece by collocation method , 2012 .

[17]  K. Gawdzińska,et al.  Application of the Pareto chart and Ishikawa diagram for the identification of major defects in metal composite castings , 2011 .

[18]  Michael J. Lukitsch,et al.  Tapping of Al–Si alloys with diamond-like carbon coated tools and minimum quantity lubrication , 2010 .

[19]  Richard E. DeVor,et al.  Prediction of Thread Quality by Detection and Estimation of Tapping Faults , 2002 .

[20]  J. S. Agapiou,et al.  Evaluation of the Effect of High Speed Machining on Tapping , 1994 .

[21]  S. M. Wu,et al.  Diagnosis of the tapping process by information measure and probability voting approach , 1990 .

[22]  Zhen Meng,et al.  Reinforced lubrication of vegetable oils with graphene additive in tapping ADC12 aluminum alloy , 2018 .

[23]  Anna Zawada-Tomkiewicz,et al.  A case study in technological quality assurance of a metric screw thread , 2018 .

[24]  P. M. Diéguez,et al.  Experimental Study of Tapping Wear Mechanisms on Nodular Cast Iron , 2015 .

[25]  H. Y. Kim,et al.  Effects of Synchronizing Errors on Cutting Performance in the Ultra-High-Speed Tapping , 2003 .

[26]  Wei Li,et al.  Diagnosis of tapping process using spindle motor current , 2003 .

[27]  E.J.A. Armarego,et al.  Predictive Cutting Models for the Forces and Torque in Machine Tapping with Straight Flute Taps , 2002 .

[28]  G. Lorenz,et al.  Principal Component Analysis in Technology , 1989 .