Load modeling and calibration techniques for power system studies

Load modeling is one of the most uncertain areas in power system simulations. Having an accurate load model is important for power system planning and operation. Here, a review of load modeling and calibration techniques is given. This paper is not comprehensive, but covers some of the techniques commonly found in the literature. The advantages and disadvantages of each technique are outlined.

[1]  Hsiao-Dong Chiang,et al.  Dynamic load models in power systems using the measurement approach , 1993 .

[2]  D. Kosterev,et al.  Load Modeling in WECC , 2006, 2006 IEEE PES Power Systems Conference and Exposition.

[3]  K. Morison,et al.  Load Modeling for Voltage Stability Studies , 2006, 2006 IEEE PES Power Systems Conference and Exposition.

[4]  Bih-Yuan Ku,et al.  Approximations of power system dynamic load characteristics by artificial neural networks , 1991, Proceedings of the First International Forum on Applications of Neural Networks to Power Systems.

[5]  David J. Hill,et al.  Nonlinear dynamic load models with recovery for voltage stability studies , 1993 .

[6]  Scott Backhaus,et al.  Modeling and control of thermostatically controlled loads , 2011 .

[7]  D. Kosterev,et al.  Load modeling in power system studies: WECC progress update , 2008, 2008 IEEE Power and Energy Society General Meeting - Conversion and Delivery of Electrical Energy in the 21st Century.

[8]  Duncan S. Callaway.  Tapping the energy storage potential in electric loads to deliver load following and regulation, with application to wind energy , 2009 .

[9]  Xiao-Ping Zhang,et al.  Composite load models based on field measurements and their applications in dynamic analysis , 2007 .

[10]  D. Kosterev,et al.  Dynamic Load Models: Where Are We? , 2006, 2005/2006 IEEE/PES Transmission and Distribution Conference and Exhibition.

[11]  P. Ju,et al.  Comparisons between the Load Models with Considering Distribution Network Directly or Indirectly , 2008, 2008 Joint International Conference on Power System Technology and IEEE Power India Conference.

[12]  C. W. Taylor,et al.  Load representation for dynamic performance analysis , 1993 .

[13]  Karanjit Kalsi,et al.  Aggregated modeling of thermostatic loads in demand response: A systems and control perspective , 2011, IEEE Conference on Decision and Control and European Control Conference.

[14]  Ross T. Guttromson,et al.  Modeling Distributed Energy Resource Dynamics on the Transmission System , 2002, IEEE Power Engineering Review.

[15]  Alberto Borghetti,et al.  On dynamic load models for voltage stability studies , 1997 .

[16]  G.T. Heydt,et al.  Composite neural network load models for power system stability analysis , 2004, IEEE PES Power Systems Conference and Exposition, 2004..

[17]  Zhao Yang Dong,et al.  Power system dynamic load identification and stability , 2000, PowerCon 2000. 2000 International Conference on Power System Technology. Proceedings (Cat. No.00EX409).

[18]  L. Loron,et al.  Application of the extended Kalman filter to parameters estimation of induction motors , 2002 .

[19]  R. R. Mohler,et al.  Load modelling and voltage stability analysis by neural networks , 1997, Proceedings of the 1997 American Control Conference (Cat. No.97CH36041).

[20]  P. Kundur,et al.  Power system stability and control , 1994 .

[21]  M. Sedighizadeh,et al.  Load Modeling for Power Flow and Transient Stability Computer Studies at BAKHTAR Network , 2007 .

[22]  D.J. Hill,et al.  Load modeling by finding support vectors of load data from field measurements , 2006, IEEE Transactions on Power Systems.

[23]  Kwang Y. Lee,et al.  Improved Dynamic Load Model for Power system Stability Studies , 1982, IEEE Transactions on Power Apparatus and Systems.

[24]  Pei Zhang,et al.  Derivation of load model parameters using improved Genetic Algorithm , 2008, 2008 Third International Conference on Electric Utility Deregulation and Restructuring and Power Technologies.

[25]  Ma Da-Qiang,et al.  A Novel Approach to Dynamic Load Modelling , 1989, IEEE Power Engineering Review.

[26]  R. Malhamé,et al.  Electric load model synthesis by diffusion approximation of a high-order hybrid-state stochastic system , 1985 .

[27]  Wilsun Xu,et al.  Voltage stability analysis using generic dynamic load models , 1994 .

[28]  Xinran Li,et al.  The study on composite load model structure of artificial neural network , 2008, 2008 Third International Conference on Electric Utility Deregulation and Restructuring and Power Technologies.

[29]  Han Dong,et al.  Impacts of DFIG-based wind farm on load modeling , 2009, 2009 IEEE Power & Energy Society General Meeting.

[30]  Robert J. Thomas,et al.  Power system dynamic load modeling using artificial neural networks , 1994 .

[31]  Ines Romero.  Dynamic Load Models for Power Systems - Estimation of Time-Varying Parameters During Normal Operation , 2002 .

[32]  H. Chiang,et al.  Multiple Solutions and Plateau Phenomenon in Measurement-Based Load Model Development: Issues and Suggestions , 2009, IEEE Transactions on Power Systems.

[33]  C. W. Taylor,et al.  Identification of power system load dynamics using artificial neural networks , 1997 .

[34]  Ra Gawler,et al.  Load Modelling for Electrical Power System Studies , 1979 .

[35]  A. Debs,et al.  Statistical synthesis of power system functional load models , 1979, 1979 18th IEEE Conference on Decision and Control including the Symposium on Adaptive Processes.

[36]  C. W. Taylor,et al.  Standard load models for power flow and dynamic performance simulation , 1995 .

[37]  Regina Lamedica,et al.  A bottom-up approach to residential load modeling , 1994 .

[38]  Jürgen Kurths,et al.  Modeling and identification of nonlinear systems , 2004 .

[39]  Ma Jin,et al.  Load Modeling Considering Distributed Generation , 2007, 2007 IEEE Lausanne Power Tech.

[40]  N. Jenkins,et al.  A model of PV generation suitable for stability analysis , 2004, IEEE Transactions on Energy Conversion.

[41]  Jinyu Wen,et al.  Power system load modeling by learning based on system measurements , 2003 .

[42]  H.M.Z. El-Din,et al.  Dynamic load modeling in large scale stability studies , 1988 .

[43]  V. Ajjarapu,et al.  A Novel Parameter Identification Approach via Hybrid Learning for Aggregate Load Modeling , 2009, IEEE Transactions on Power Systems.

[44]  C.A. Canizares,et al.  On the parameter estimation and modeling of aggregate power system loads , 2004, IEEE Transactions on Power Systems.

[45]  Ping Ju,et al.  Nonlinear dynamic load modelling: model and parameter estimation , 1996 .

[46]  Jian Ma,et al.  Using a support vector machine (SVM) to improve generalization ability of load model parameters , 2009, 2009 IEEE/PES Power Systems Conference and Exposition.

[47]  Kun Gao,et al.  Dynamic synthesis load modeling approach based on load survey and load curves analysis , 2008, 2008 Third International Conference on Electric Utility Deregulation and Restructuring and Power Technologies.

[48]  Fred Schweppe,et al.  Physically Based Modeling of Cold Load Pickup , 1981, IEEE Transactions on Power Apparatus and Systems.

[49]  Yonghua Song,et al.  Optimisation techniques for electrical power systems. II. Heuristic optimisation methods , 2001 .

[50]  I. Hiskens.  Identifiability of hybrid system models , 2000, Proceedings of the 2000. IEEE International Conference on Control Applications. Conference Proceedings (Cat. No.00CH37162).