AC/DC converter free LED driver for lightings

This paper presents a noble AC/DC converter-free LED driver for LED lighting applications. The presented LED driver applies the AC mains power directly to the LED strings with no AC/DC converter stage, thus bulky transformer and life-time limiting electrolytic capacitor no longer needed. This small-sized, low-cost and reliable LED lighting driver was realized with an LED driver IC, which selectively empowers multi-channel LED strings based on the measured input AC voltage signal. The IC was fabricated in 1-um high voltage BCD process capable of handling AC input voltage up to 240 V. By PWM-controlling the LED-driving high-voltage switches, the IC resolved the thermal issue which is critical for the reliability of LED lighting module. A 4-W prototype LED driver module was implemented and tested to verify the feasibility of the suggested Converter-/Capacitor-less (ie. CC-less) LED driver scheme for low cost LED lighting.

[1]  J.Y. Tsao,et al.  Solid-state lighting: lamps, chips and materials for tomorrow , 2005, (CLEO). Conference on Lasers and Electro-Optics, 2005..

[2]  Paul S. Martin,et al.  Illumination with solid state lighting technology , 2002 .

[3]  M. Pashley,et al.  Red, green, and blue LEDs for white light illumination , 2002 .

[4]  Xinbo Ruan,et al.  Means of Eliminating Electrolytic Capacitor in AC/DC Power Supplies for LED Lightings , 2009, IEEE Transactions on Power Electronics.

[5]  M. Craford.  LEDs challenge the incandescents , 1992, IEEE Circuits and Devices Magazine.

[6]  Pan TianFu,et al.  An Improved Single-Stage Flyback PFC Converter for High-Luminance Lighting LED Lamps , 2007, 2007 8th International Conference on Electronic Measurement and Instruments.