Synthesis and characterization of new highly organosoluble poly(etherimide)s derived from 1,1‐bis{4‐[4‐(3,4‐dicarboxyphenoxy)phenyl]‐4‐phenylcyclohexane} dianhydride

A new bulky pendent bis(ether anhydride), 1,1-bis[4-(4-dicarboxyphenoxy)phenyl]-4-phenylcyclohexane dianhydride, was prepared in three steps, starting from the nitrodisplacement of 1,1-bis(4-hydroxyphenyl)-4-phenylcyclohexane with 4-nitrophthalonitrile to form bis(ether dinitrile), followed by alkaline hydrolysis of the bis(ether dinitrile) and subsequent dehydration of the resulting bis(ether diacid). A series of new poly(ether imide)s were prepared from the bis(ether anhydride) with various diamines by a conventional two-stage synthesis including polyaddition and subsequent chemical cyclodehydration. The resulting poly(ether imide)s had inherent viscosities of 0.50–0.73 dL g−1. The gel permeation chromatography measurements revealed that the polymers had number-average and weight-average molecular weights of up to 57,000 and 130,000, respectively. All the polymers showed typical amorphous diffraction patterns. All of the poly(ether imide)s showed excellent solubility in comparison with the other polyimides derived from adamantane, norbornane, cyclododecane, and methanohexahydroindane and were readily dissolved in various solvents such as N-methyl-2-pyrrolidinone, N,N-dimethylacetamide (DMAc), N,N-dimethylformamide, pyridine, cyclohexanone, tetrahydrofuran, and even chloroform. These polymers had glass-transition temperatures of 226–255 °C. Most of the polymers could be dissolved in chloroform in as high as a 30 wt % concentration. Thermogravimetric analysis showed that all polymers were stable up to 450 °C, with 10% weight losses recorded from 458 to 497 °C in nitrogen. These transparent, tough, and flexible polymer films could be obtained by solution casting from DMAc solutions. These polymer films had tensile strengths of 79–103 MPa and tensile moduli of 1.5–2.1 GPa. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2066–2074, 2002

[1]  J. Weiner,et al.  Fundamentals and applications , 2003 .

[2]  Der-Jang Liaw,et al.  Synthesis and Characterization of New Highly Organosoluble Poly(ether imide)s Bearing a Noncoplanar 2,2‘-Dimethyl-4,4‘-biphenyl Unit and Kink Diphenylmethylene Linkage , 2001 .

[3]  Chin-Ping Yang,et al.  Syntheses and properties of organosoluble poly(ether imide)s from 1,1‐bis[4‐(3,4‐dicarboxyphenoxy)phenyl]cyclohexane dianhydride and aromatic diamines , 2001 .

[4]  D. Liaw,et al.  Synthesis and Characterization of New Cardo Polyamides and Polyimides bearing a 4‐Phenylcyclohexylidene Unit , 2001 .

[5]  D. Liaw,et al.  Synthesis and characterization of new cardo polyamides and polyimides containing tert‐butylcyclohexylidene units , 2000 .

[6]  D. Liaw,et al.  Synthesis and Properties of New Soluble Polyamides Derived from 2,2`-Dimethyl- 4,4`-bis(4-carboxyphenoxy)biphenyl , 1999 .

[7]  D. Liaw,et al.  Synthesis and characterization of new polyamides and polyimides prepared from 2,2-bis[4-(4-aminophenoxy)phenyl]adamantane , 1999 .

[8]  D. Liaw,et al.  Synthesis and properties of new polyimides derived from 1,1-bis[4-(4-aminophenoxy)phenyl]cyclododecane , 1999 .

[9]  Lain‐Jong Li,et al.  Synthesis and characterization of new soluble polyimides from 3,3', 4,4'-benzhydrol tetracarboxylic dianhydride and various diamines , 1998 .

[10]  M. Jin,et al.  Synthesis and characterization of soluble polyimides from 1,1-bis(4-aminophenyl)cyclohexane derivatives , 1997 .

[11]  Y. Matsuki,et al.  Soluble Polyimides Based on 2,3,5-Tricarboxycyclopentyl Acetic Dianhydride , 1997 .

[12]  Byong-Wa Chun Preparation and Characterization of Organic-Soluble Optically Transparent Polyimides from Alicyclic Dianhydride, Bicyclo(2.2.2)-Oct-7-Ene-2,3,5,6-Tetracarboxylic Dianhydride , 1994 .

[13]  Toshihiko Matsumoto,et al.  Soluble polyimides with polyalicyclic structure. 2. Polyimides from bicyclo[2.2.1]heptane-2-exo-3-exo-5-exo-6-exo-tetracarboxylic 2,3:5,6-dianhydride , 1993 .

[14]  K. Horie,et al.  Polyimides with Alicyclic Diamines. I. Syntheses and Thermal Properties , 1993 .

[15]  Hans-Werner Schmidt,et al.  Para-linked aromatic poly(amic ethyl esters): precursors to rodlike aromatic polyimides. 1. Synthesis and imidization study , 1992 .

[16]  T. Matsuura,et al.  Polyimide derived from 2,2'-bis(trifluoromethyl)-4,4'-diaminobiphenyl. 1. Synthesis and characterization of polyimides prepared with 2,2'-bis(3,4-dicarboxyphenyl)hexafluoropropane dianhydride or pyromellitic dianhydride , 1991 .

[17]  B. Sillion,et al.  Synthesis and characterization of a linear CARDO polyimide from (5,5′-bisisobenzofuran)-1,1′,3,3′-tetrone and 4,4′-(9H-fluoren-9-ylidene)bisphenylamine , 1991 .

[18]  T. Matsuura,et al.  Synthesis and properties of new polyimides containing flourinated alkoxy side chains , 1990 .