Influence of building envelopes, climates, and occupancy patterns on residential HVAC demand

Abstract Heating, ventilation and air-conditioning (HVAC) demand accounts for 40% of household energy use. While the impacts of local climates, building characteristics, and occupancy patterns on HVAC demand are all well-known, the interplay between these factors has not been systematically studied. This paper provides a quantitative analysis of the complex interplay between these parameters on the annual and peak HVAC demand of residential buildings. Australia is used as a case study because the building construction practices are similar to many other countries, particularly in Europe and the USA, and the Australian climates span the majority of climates found in the world. The wall types considered are cement render, timber clad, brick veneer, reverse brick veneer, and cavity brick. The climates range from tropical in the north of the country, to cold temperate in the south of the country. The occupancy patterns are modeled using six common Occupancy Scenarios. The results show the highest energy reductions are observed in the climates with high diurnal temperature variation, such as Melbourne (51%) and Hobart (54%). The effect of thermal inertia is less in the climates with low diurnal temperature variation such as Darwin (19%). Occupancy scenarios that include unoccupied periods result in lower annual HVAC demand, yet they increase the peak cooling and heating demand. Increasing the indoor thermal mass by using brick veneer internal walls is shown to reduce the demand by approximately 10–15%.

[1]  Laure Itard,et al.  Energy performance and comfort in residential buildings: Sensitivity for building parameters and occupancy , 2015 .

[2]  Tianzhen Hong,et al.  Advances in research and applications of energy-related occupant behavior in buildings ☆ , 2016 .

[3]  Jeffrey D. Spitler.  Thermal load and energy performance prediction , 2012 .

[4]  Giacomo Capizzi,et al.  Thermal transients simulations of a building by a dynamic model based on thermal-electrical analogy: Evaluation and implementation issue , 2017 .

[5]  V. Costanzo,et al.  Indoor thermal environments in Chinese residential buildings responding to the diversity of climates , 2018 .

[6]  Biswajit Basu,et al.  Demand-side Characterization of the Smart City for Energy Modelling☆ , 2014 .

[7]  Keith Baker,et al.  Improving the prediction of UK domestic energy-demand using annual consumption-data , 2008 .

[8]  Robert A. Taylor,et al.  A metric for characterizing the effectiveness of thermal mass in building materials , 2014 .

[9]  Pierluigi Mancarella,et al.  High resolution modelling of multi- 1 energy domestic demand profiles 2 , 2015 .

[10]  Siaw Kiang Chou,et al.  Achieving better energy-efficient air conditioning - A review of technologies and strategies , 2013 .

[11]  Xiaoming Wang,et al.  Assessment of climate change impact on residential building heating and cooling energy requirement in Australia , 2010 .

[12]  K. Steemers,et al.  A method of formulating energy load profile for domestic buildings in the UK , 2005 .

[13]  Henk Visscher,et al.  The effect of occupancy and building characteristics on energy use for space and water heating in Dutch residential stock , 2009 .

[14]  T. Alpcan,et al.  Solar Curtailment Requirements in Low Voltage Networks: Impact of Climate and Building Wall Types in Australia , 2018, 2018 IEEE Innovative Smart Grid Technologies - Asia (ISGT Asia).

[15]  Behdad Moghtaderi,et al.  Effect of thermal mass on the thermal performance of various Australian residential constructions systems , 2008 .

[16]  Chris Underwood,et al.  Modelling Methods for Energy in Buildings , 2004 .

[17]  Abhijit Date,et al.  Energy efficient residential house wall system , 2013 .

[18]  David Infield,et al.  Domestic electricity use: A high-resolution energy demand model , 2010 .

[19]  M. Santamouris,et al.  On the impact of urban climate on the energy consumption of buildings , 2001 .

[20]  Koen Steemers,et al.  Assessing the natural ventilation cooling potential of office buildings in different climate zones in China , 2009 .

[21]  K. Steemers,et al.  Energy policy and standard for built environment in China , 2005 .

[22]  Luisa F. Cabeza,et al.  Experimental set-up for testing active and passive systems for energy savings in buildings – Lessons learnt , 2018 .

[23]  V. Costanzo,et al.  The effect of passive measures on thermal comfort and energy conservation. A case study of the hot summer and cold winter climate in the Yangtze River region , 2018 .

[24]  Aidan Reilly,et al.  The impact of thermal mass on building energy consumption , 2017 .

[25]  Mitja Košir,et al.  Influence of architectural building envelope characteristics on energy performance in Central European climatic conditions , 2018 .

[26]  Domingo Guinea,et al.  Reducing thermal energy demand in residential buildings under Spanish climatic conditions: Qualitative control strategies for massive shutter positioning , 2017 .

[27]  Nicola Cardinale,et al.  Thermal performance of a mobile home with light envelope , 2010 .

[28]  Dong Chen,et al.  A model for predicting household end-use energy consumption and greenhouse gas emissions in Australia , 2013 .

[29]  M. Bidi,et al.  Experimental study on the cooling performance of solar-assisted natural ventilation in a large building in a warm and humid climate , 2018, Journal of Building Engineering.

[30]  Zhengen Ren,et al.  A local-community-level, physically-based model of end-use energy consumption by Australian housing stock , 2012 .

[31]  Abhijit Date,et al.  In Press) A new house wall system for residential buildings , 2013 .

[32]  Tianzhen Hong,et al.  The human dimensions of energy use in buildings: A review , 2018 .