Experimental investigation and performance analysis of a fin tube phase change cold storage unit for high temperature cooling application
暂无分享,去创建一个
Ruzhu Wang | Xiaoqiang Zhai | Xiwen Cheng | C. Wang | X. Zhai | Xiwen Cheng | Rui Wang | C. Wang
[1] K. Sopian,et al. Numerical study of PCM solidification in a triplex tube heat exchanger with internal and external fins , 2013 .
[2] Luisa F. Cabeza,et al. Experimental analysis of hydroquinone used as phase change material (PCM) to be applied in solar cooling refrigeration. , 2012 .
[3] Bernard Franković,et al. Analysis of the influence of operating conditions and geometric parameters on heat transfer in water-paraffin shell-and-tube latent thermal energy storage unit , 2006 .
[4] Ruzhu Wang,et al. Experimental investigation on the heat transfer performance and water condensation phenomenon of radiant cooling panels , 2014 .
[5] A. Mujumdar,et al. Thermodynamic optimization of the thermal process in energy storage using multiple phase change materials , 1997 .
[6] H. Cui,et al. Preparation, characterization and thermal properties of Lauryl alcohol/Kaolin as novel form-stable composite phase change material for thermal energy storage in buildings , 2013 .
[7] K. Ismail,et al. Numerical and experimental study on the solidification of PCM around a vertical axially finned isothermal cylinder , 2001 .
[8] Bárbara Torregrosa-Jaime,et al. Experimental analysis of a paraffin-based cold storage tank , 2013 .
[9] Gennady Ziskind,et al. Numerical and experimental study of melting in a spherical shell , 2007 .
[10] G. Fang,et al. Preparation and thermal properties of stearic acid/titanium dioxide composites as shape-stabilized phase change materials for building thermal energy storage , 2014 .
[11] Long Jian-you,et al. Numerical and experimental investigation for heat transfer in triplex concentric tube with phase change material for thermal energy storage , 2008 .
[12] Alberto Giretti,et al. Radiant floors integrated with PCM for indoor temperature control , 2011 .
[13] David Chow,et al. Theoretical and practical analysis of an integrated solar hot water-powered absorption cooling system , 2012 .
[14] Noel León,et al. High temperature latent heat thermal energy storage: Phase change materials, design considerations and performance enhancement techniques , 2013 .
[15] Luisa F. Cabeza,et al. Mathematical modeling of a PCM storage tank in a solar cooling plant , 2013 .
[16] Xin Wang,et al. An assessment of mixed type PCM-gypsum and shape-stabilized PCM plates in a building for passive solar heating , 2007 .
[17] Xiaoqiang Zhai,et al. A review for absorbtion and adsorbtion solar cooling systems in China , 2009 .
[18] Kang Zhao,et al. Performance of temperature and humidity independent control air-conditioning system in an office bui , 2011 .
[19] Kamaruzzaman Sopian,et al. Experimental study of melting and solidification of PCM in a triplex tube heat exchanger with fins , 2014 .
[20] Martin Belusko,et al. Experimental investigation of dynamic melting in a tube-in-tank PCM system , 2013 .
[21] Yu Jiang,et al. Experimental investigation on a novel temperature and humidity independent control air conditioning system – Part II: Heating condition , 2014 .
[22] Stéphane Citherlet,et al. Numerical model and experimental validation of heat storage with phase change materials , 2007 .
[23] Paulo Santos,et al. Review of passive PCM latent heat thermal energy storage systems towards buildings’ energy efficiency , 2013 .
[24] Xiaoqiang Zhai,et al. Performance of the capric and lauric acid mixture with additives as cold storage materials for high temperature cooling application , 2013 .
[25] Guiyin Fang,et al. Discharging characteristics modeling of cool thermal energy storage system with coil pipes using n-tetradecane as phase change material. , 2012 .
[26] Xiaohua Liu,et al. On-site measured performance of a radiant floor cooling/heating system in Xi'an Xianyang International Airport , 2014 .