Modular double-cascade converter for high-power medium-voltage drives

The modular double-cascade converter (MDC) is a new multilevel AC/AC converter topology, which has a modular structure. The proposed topology can be used in medium-voltage motor and generator drives, and in interfacing of grids of different voltages and frequencies. MDC is formed with two sets of cascaded H-bridges where the isolation of the power modules is carried out with medium-frequency multiwinding transformers. Although the transformers have a transformation ratio of one, the presented topology can be used to transform the voltage level by using different connections for the input and output H-bridges. The number of steps of input and output voltages can be varied by connecting the modular units of MDC in series or in parallel. The functionality of the topology is verified by simulations of a seven-level version for a 3.3 kV, 1.1 MW application and experimental results are shown for a 400 V, 76 kW three-level inverter. In particular, an inherent submodule energy sharing capability through the transformer is analysed and assessed by simulations and experimental tests.

[1]  J. W. Kolar,et al.  "Magnetic Ear"-based balancing of magnetic flux in high power medium frequency dual active bridge converter transformer cores , 2011, 8th International Conference on Power Electronics - ECCE Asia.

[2]  Abd-Alhalim Yatim,et al.  Design and Implementation of a New Multilevel Inverter Topology , 2012, IEEE Transactions on Industrial Electronics.

[3]  Hirofumi Akagi,et al.  A New Neutral-Point-Clamped PWM Inverter , 1981, IEEE Transactions on Industry Applications.

[4]  H. Akagi,et al.  Control and Design of a Modular Multilevel Cascade BTB System Using Bidirectional Isolated DC/DC Converters , 2011, IEEE Transactions on Power Electronics.

[5]  M. Marchesoni,et al.  A non conventional power converter for plasma stabilization , 1988, PESC '88 Record., 19th Annual IEEE Power Electronics Specialists Conference.

[6]  J.W. Kolar,et al.  Five-level virtual-flux direct power control for the active neutral-point clamped multilevel inverter , 2008, 2008 IEEE Power Electronics Specialists Conference.

[7]  Charles I. Odeh,et al.  Cascaded three-phase pulse-width modulated switched voltage source inverter , 2014 .

[8]  Ebrahim Babaei,et al.  A New Multilevel Converter Topology With Reduced Number of Power Electronic Components , 2012, IEEE Transactions on Industrial Electronics.

[9]  Pablo Lezana,et al.  Cascaded Multilevel Inverter With Regeneration Capability and Reduced Number of Switches , 2008, IEEE Transactions on Industrial Electronics.

[10]  Bin Wu,et al.  Recent Advances and Industrial Applications of Multilevel Converters , 2010, IEEE Transactions on Industrial Electronics.

[11]  F. Kieferndorf,et al.  A new medium voltage drive system based on ANPC-5L technology , 2010, 2010 IEEE International Conference on Industrial Technology.

[12]  Brendan Peter McGrath,et al.  Multicarrier PWM strategies for multilevel inverters , 2002, IEEE Trans. Ind. Electron..

[13]  Zheng Xu,et al.  Modeling and Control of a Modular Multilevel Converter-Based HVDC System Under Unbalanced Grid Conditions , 2012, IEEE Transactions on Power Electronics.

[14]  P. Zanchetta,et al.  Power flow control through a multi-level H-bridge based power converter for Universal and Flexible Power Management in future electrical grids , 2008, 2008 13th International Power Electronics and Motion Control Conference.

[15]  Rainer Marquardt,et al.  A new AC/AC multilevel converter family , 2005, IEEE Transactions on Industrial Electronics.

[16]  H. Akagi,et al.  A Bidirectional Isolated DC–DC Converter as a Core Circuit of the Next-Generation Medium-Voltage Power Conversion System , 2007, IEEE Transactions on Power Electronics.

[17]  P. W. Hammond.  A new approach to enhance power quality for medium voltage drives , 1995, Industry Applications Society 42nd Annual Petroleum and Chemical Industry Conference.

[18]  K. Gopakumar,et al.  A Five-Level Inverter Topology with Single-DC Supply by Cascading a Flying Capacitor Inverter and an H-Bridge , 2012, IEEE Transactions on Power Electronics.

[19]  Pablo Lezana,et al.  High-voltage multilevel converter with regeneration capability , 2002, IEEE Trans. Ind. Electron..

[20]  Steffen Bernet,et al.  The active NPC converter and its loss-balancing control , 2005, IEEE Transactions on Industrial Electronics.

[21]  Hossein Iman-Eini,et al.  A new switching strategy for transformer-less back-to-back cascaded H-bridge multilevel converter , 2014 .

[22]  Zedong Zheng,et al.  A new multilevel converter with multi-winding medium-frequency transformer , 2011, Proceedings of the 2011 14th European Conference on Power Electronics and Applications.

[23]  Stefano Bifaretti,et al.  Advanced Power Electronic Conversion and Control System for Universal and Flexible Power Management , 2011, IEEE Transactions on Smart Grid.

[24]  Hirofumi Akagi,et al.  A Bi-Directional Isolated DC/DC Converter as a Core Circuit of the Next-Generation Medium-Voltage Power Conversion System , 2006 .

[25]  S. Allebrod,et al.  New transformerless, scalable Modular Multilevel Converters for HVDC-transmission , 2008, 2008 IEEE Power Electronics Specialists Conference.

[26]  Pertti Silventoinen,et al.  Flux and winding current balancing control for a medium-frequency six-winding transformer , 2014, IECON 2014 - 40th Annual Conference of the IEEE Industrial Electronics Society.