Out-of-plane buckled cantilever microstructures with adjustable angular positions using thermal bimorph actuation for transducer applications

The integration of thermal bimorph actuators and buckled cantilever structures to form an out-of-plane plate with adjustable angular positions is reported. This structure could be used as a platform to build other transducers such as optical micromirrors, scanning antennas, switches or low-frequency oscillators. The electromechanical characterisation has shown that these structures can adjust their angular position by 6° when they are operated using a DC source. The thermal characterisation performed by an infrared camera showed that the heat-affected zone reaches a maximum temperature of 125°C while the rest of the structure remains unaffected by the generated heat.

[1]  Li Fan,et al.  Self-assembled microactuated XYZ stages for optical scanning and alignment , 1997, Proceedings of International Solid State Sensors and Actuators Conference (Transducers '97).

[2]  Jürgen Kosel,et al.  Simulation of SU-8 Frequency-Driven Scratch Drive Actuators , 2013, 2013 UKSim 15th International Conference on Computer Modelling and Simulation.

[3]  M. Parameswaran,et al.  Automated assembly of hingeless 90° out-of-plane microstructures , 2007 .

[4]  C. Kim,et al.  Measurement of mechanical properties for MEMS materials , 1999 .

[5]  Arpys Arevalo,et al.  Low-cost silicon wafer dicing using a craft cutter , 2015 .

[6]  David Conchouso,et al.  A versatile multi-user polyimide surface micromachinning process for MEMS applications , 2015, 10th IEEE International Conference on Nano/Micro Engineered and Molecular Systems.

[7]  William N. Sharpe,et al.  Microscale Characterization of Mechanical Properties , 2007 .

[8]  Dan Sameoto,et al.  Out-of-plane electrothermal actuators in silicon-on-insulator technology , 2006, Canadian Journal of Electrical and Computer Engineering.

[9]  Mohammad I. Younis,et al.  Towards a digital sound reconstruction MEMS device: Characterization of a single PZT based piezoelectric actuator , 2015, 10th IEEE International Conference on Nano/Micro Engineered and Molecular Systems.

[10]  D. Castro,et al.  Development of untethered SU-8 polymer scratch drive microrobots , 2011, 2011 IEEE 24th International Conference on Micro Electro Mechanical Systems.

[11]  Ian G. Foulds,et al.  Characterization of Kink Actuators as Compared to Traditional Chevron Shaped Bent-Beam Electrothermal Actuators , 2012, Micromachines.

[12]  Mohammad I. Younis,et al.  An Experimental and Theoretical Investigation of a Micromirror Under Mixed-Frequency Excitation , 2015, Journal of Microelectromechanical Systems.

[13]  Gregory T. A. Kovacs,et al.  Ciliary microactuator array for scanning electron microscope positioning stage , 1998 .

[14]  David Conchouso,et al.  Out-of-plane platforms with bi-directional thermal bimorph actuation for transducer applications , 2015, 10th IEEE International Conference on Nano/Micro Engineered and Molecular Systems.

[15]  Jurgen Kosel,et al.  Three-Axis Magnetic Field Induction Sensor Realized on Buckled Cantilever Plate , 2013, IEEE Transactions on Magnetics.

[16]  Atif Shamim,et al.  New Movable Plate for Efficient Millimeter Wave Vertical on-Chip Antenna , 2013, IEEE Transactions on Antennas and Propagation.

[17]  Hiroyuki Fujita,et al.  Fabrication and operation of polyimide bimorph actuators for a ciliary motion system , 1993 .

[18]  Ming C. Wu,et al.  Micromachining for optical and optoelectronic systems , 1997, Proc. IEEE.

[19]  A.M. Leung,et al.  Three-axis thermal accelerometer based on buckled cantilever microstructure , 2008, 2008 IEEE Sensors.

[20]  A. Leung,et al.  Buckled cantilevers for out-of-plane platforms , 2008 .