Sustainable polygeneration design and assessment through combined thermodynamic, economic and environmental analysis

With more renewable introduction, distributed generation emerges to be important. Combining multiple utility outputs in a single unit, formally called ‘polygeneration’ is a good option using available local resources, say biomass. However, such plants are to be economically feasible and environmentally acceptable also for sustainable operation. In this paper, a step-by-step feasible sustainable system design of a polygeneration plant to deliver power, heating, cooling and fresh water is reported. It is simulated by Aspen Plus®. The plant is optimized and assessed from thermodynamic, economic and environmental viewpoints. Results show that up to 20% of primary energy savings is possible by optimum process integration and 25 kt/y of CO2 emission may be reduced. Gasifier, combustion chamber and condenser destruct exergy mostly. Payback period of the plant is 6.66 years and fuel feed rate of the plant should be more than 20 t/d for a feasible sustainable operation.

[1]  John H. Lienhard,et al.  On exergy calculations of seawater with applications in desalination systems , 2010 .

[2]  Jie Feng,et al.  Optimization and efficiency analysis of polygeneration system with coke-oven gas and coal gasified gas by Aspen Plus , 2012 .

[3]  T. J. Kotas,et al.  The Exergy Method of Thermal Plant Analysis , 2012 .

[4]  Hakan Caliskan,et al.  Novel approaches to exergy and economy based enhanced environmental analyses for energy systems , 2015 .

[5]  Ibrahim Dincer,et al.  Multi-objective exergy-based optimization of a polygeneration energy system using an evolutionary algorithm , 2012 .

[6]  Kuntal Jana,et al.  Polygeneration performance assessments: multi-dimensional viewpoint , 2015, Clean Technologies and Environmental Policy.

[7]  Ibrahim Dincer,et al.  Development and analysis of a new renewable energy-based multi-generation system , 2015 .

[8]  Ibrahim Dincer,et al.  Exergy: Energy, Environment and Sustainable Development , 2007 .

[9]  Aie CO2 Emissions from Fuel Combustion 2012 , 2012 .

[10]  Y. Çengel,et al.  Thermodynamics : An Engineering Approach , 1989 .

[11]  Michel G.J. den Elzen,et al.  The Copenhagen Accord: abatement costs and carbon prices resulting from the submissions , 2011 .

[12]  Veera Gnaneswar Gude,et al.  Energy storage for desalination processes powered by renewable energy and waste heat sources , 2015 .

[13]  Kuntal Jana,et al.  Techno-economic evaluation of a polygeneration using agricultural residue--a case study for an Indian district. , 2015, Bioresource technology.

[14]  Antonio G. Ramos,et al.  Novel application for exergy and thermoeconomic analysis of processes simulated with Aspen Plus , 2011 .

[15]  Pierluigi Mancarella,et al.  Distributed multi-generation: A comprehensive view , 2009 .

[16]  P. Eng CO2 emissions from fuel combustion: highlights , 2009 .

[17]  Qinhui Wang,et al.  Thermodynamic and economic analysis of polygeneration system integrating atmospheric pressure coal pyrolysis technology with circulating fluidized bed power plant , 2014 .

[18]  Kuntal Jana,et al.  Polygeneration using agricultural waste: Thermodynamic and economic feasibility study , 2015 .

[19]  Silvio de Oliveira Exergy : production, cost and renewability , 2013 .

[20]  Claus Felby,et al.  Agricultural residue production and potentials for energy and materials services , 2014 .

[21]  Jonas M. Joelsson,et al.  Reduction of CO2 emission and oil dependency with biomass-based polygeneration , 2010 .

[22]  Mohsen Assadi,et al.  A CCGT Based Polygeneration Using Rice Straw: Simulation by Aspen Plus® , 2014 .

[23]  F. Calise,et al.  A novel renewable polygeneration system for a small Mediterranean volcanic island for the combined production of energy and water: Dynamic simulation and economic assessment , 2014 .

[24]  Prabir Basu,et al.  Biomass Gasification and Pyrolysis: Practical Design and Theory , 2010 .

[25]  Pierluigi Mancarella,et al.  Multi-energy systems : An overview of concepts and evaluation models , 2015 .