A finite strain framework for the simulation of polymer curing. Part I: elasticity

A phenomenologically motivated small strain model to simulate the curing of thermosets has been developed and discussed in a recently published paper (Hossain et al. in Comput Mech 43(6):769–779, 2009). Inspired by the concepts used there, this follow-up contribution presents an extension towards the finite strain regime. The thermodynamically consistent framework proposed here for the simulation of curing polymers particularly is independent of the choice of the free energy density, i.e. any phenomenological or micromechanical approach can be utilised. Both the governing equations for the curing simulation framework and the necessary details for the numerical implementation within the finite element method are derived. The curing of polymers is a very complex process involving a series of chemical reactions typically resulting in a conversion of low molecular weight monomer solutions into more or less cross-linked solid macromolecular structures. A material undergoing such a transition can be modelled by using an appropriate constitutive relation that is distinguished by prescribed temporal evolutions of its governing material parameters, which have to be determined experimentally. Part I of this work will deal with the elastic framework whereas the following Part II will focus on viscoelastic behaviour and shrinkage effects. Some numerical examples demonstrate the capability of our approach to correctly reproduce the behaviour of curing materials.

[1]  M. S. Kiasat.  Curing Shrinkage and Residual Stresses in Viscoelastic Thermosetting Resins and Composites , 2000 .

[2]  Erwan Verron,et al.  Comparison of Hyperelastic Models for Rubber-Like Materials , 2006 .

[3]  Robert S. Chambers,et al.  Verification of the capability for quantitative stress prediction during epoxy cure , 1997 .

[4]  Michael Kaliske,et al.  A micro-continuum-mechanical material model for failure of rubber-like materials: Application to ageing-induced fracturing , 2009 .

[5]  P. Bazant,et al.  Efficient Numerical Integration on the Surface of a Sphere , 1986 .

[6]  James M. Caruthers,et al.  Extensive validation of a thermodynamically consistent, nonlinear viscoelastic model for glassy polymers , 2004 .

[7]  S. Göktepe.  Micro-macro approaches to rubbery and glassy polymers : predictive micromechanically-based models and simulations , 2007 .

[8]  W. Kuhn,et al.  Beziehungen zwischen elastischen Konstanten und Dehnungsdoppelbrechung hochelastischer Stoffe , 1942 .

[9]  P. Wriggers.  Nonlinear Finite Element Methods , 2008 .

[10]  J. Lange.  Viscoelastic properties and transitions during thermal and UV cure of a methacrylate resin , 1999 .

[11]  A. Lion,et al.  On finite linear viscoelasticity of incompressible isotropic materials , 2002 .

[12]  Robert S. Chambers,et al.  Stresses during thermoset cure , 1998 .

[13]  R. D. Wood,et al.  Nonlinear Continuum Mechanics for Finite Element Analysis , 1997 .

[14]  Paul Steinmann,et al.  A small-strain model to simulate the curing of thermosets , 2009 .

[15]  A. Lion,et al.  On the phenomenological representation of curing phenomena in continuum mechanics , 2007 .

[16]  A thermodynamically consistent, nonlinear viscoelastic approach for modeling thermosets during cure , 2007 .

[17]  M. Boyce,et al.  Constitutive models of rubber elasticity: A review , 2000 .

[18]  Serdar Göktepe,et al.  A micro-macro approach to rubber-like materials—Part I: the non-affine micro-sphere model of rubber elasticity , 2004 .

[19]  C. Hof.  Mechanical characterization and modeling of curing thermosets , 2006 .

[20]  F. Trochu,et al.  Thermomechanical Properties during Cure of Glass-Polyester RTM Composites: Elastic and Viscoelastic Modeling , 2005 .

[21]  James E. Martin,et al.  Calculation of Stresses in Crosslinking Polymers , 1996 .

[22]  Alexander Lion,et al.  Thixotropic behaviour of rubber under dynamic loading histories: Experiments and theory , 1998 .

[23]  C. Truesdell,et al.  The Non-Linear Field Theories Of Mechanics , 1992 .

[24]  Alexander Lion,et al.  On the large deformation behaviour of reinforced rubber at different temperatures , 1997 .