Comparison of CAD-CAM and traditional chairside processing of 4-unit interim prostheses with and without cantilevers: Mechanics, fracture behavior, and finite element analysis.

[1]  Júlio C. M. Souza,et al.  Enhancing the bone healing on electrical stimuli through the dental implant , 2020, Computer methods in biomechanics and biomedical engineering.

[2]  João Paulo Mendes Tribst,et al.  Stress distribution of complete-arch implant-supported prostheses reinforced with silica-nylon mesh , 2019, Journal of clinical and experimental dentistry.

[3]  B. Yılmaz,et al.  Comparison of Flexural Strength of Different CAD/CAM PMMA‐Based Polymers , 2019, Journal of prosthodontics : official journal of the American College of Prosthodontists.

[4]  B. Wöstmann,et al.  Energy dissipation capacities of CAD-CAM restorative materials: A comparative evaluation of resilience and toughness. , 2019, The Journal of prosthetic dentistry.

[5]  J. Alves,et al.  Finite element analysis of peri-implant bone volume affected by stresses around Morse taper implants: effects of implant positioning to the bone crest , 2018, Computer methods in biomechanics and biomedical engineering.

[6]  M. Mathew,et al.  Biomechanical simulation of temporomandibular joint replacement (TMJR) devices: a scoping review of the finite element method. , 2018, International journal of oral and maxillofacial surgery.

[7]  M. Fredel,et al.  Influence of specimens' geometry and materials on the thermal stresses in dental restorative materials during thermal cycling. , 2017, Journal of dentistry.

[8]  J. Alves,et al.  Finite element analysis of stress extent at peri-implant bone surrounding external hexagon or Morse taper implants. , 2017, Journal of the mechanical behavior of biomedical materials.

[9]  L. Papadopoulou,et al.  Reinforcement of a PMMA resin for interim fixed prostheses with silica nanoparticles. , 2017, Journal of the mechanical behavior of biomedical materials.

[10]  R. Moraes,et al.  Characterization of Bis-Acryl Composite Resins for Provisional Restorations. , 2017, Brazilian dental journal.

[11]  L. Fiorillo,et al.  FEM and Von Mises Analysis on Prosthetic Crowns Structural Elements: Evaluation of Different Applied Materials , 2017, TheScientificWorldJournal.

[12]  C. Venturelli,et al.  Wound Myiasis Caused by Sarcophaga (Liopygia) Argyrostoma (Robineau-Desvoidy) (Diptera: Sarcophagidae): Additional Evidences of the Morphological Identification Dilemma and Molecular Investigation , 2017, TheScientificWorldJournal.

[13]  Jan-Frederik Güth,et al.  Potential of innovative digital technologies and CAD/CAM composites in complex cases with change in the VDO. , 2017, The international journal of esthetic dentistry.

[14]  Moustafa N. Aboushelib,et al.  Comparison of interim restorations fabricated by CAD/CAM with those fabricated manually. , 2015, The Journal of prosthetic dentistry.

[15]  Miguel Roig,et al.  Comparative study of interim materials for direct fixed dental prostheses and their fabrication with CAD/CAM technique. , 2015, The Journal of prosthetic dentistry.

[16]  O. Kara,et al.  In vitro study of fracture strength of provisional crown materials , 2015, The journal of advanced prosthodontics.

[17]  H. Weber,et al.  First clinical experiences with CAD/CAM-fabricated PMMA-based fixed dental prostheses as long-term temporaries , 2015, Clinical Oral Investigations.

[18]  Jing Li,et al.  Comparison of the flexural strength and marginal accuracy of traditional and CAD/CAM interim materials before and after thermal cycling. , 2014, The Journal of prosthetic dentistry.

[19]  M. Tolvanen,et al.  Fiber-reinforced composite fixed dental prostheses with various pontics. , 2014, The journal of adhesive dentistry.

[20]  Daniel Edelhoff,et al.  Fit of 4-unit FDPs made of zirconia and CoCr-alloy after chairside and labside digitalization--a laboratory study. , 2014, Dental materials : official publication of the Academy of Dental Materials.

[21]  M. Roos,et al.  Fracture load of milled polymeric fixed dental prostheses as a function of connector cross-sectional areas. , 2013, The Journal of prosthetic dentistry.

[22]  M. Özcan,et al.  Adhesion of veneering resins to polymethylmethacrylate-based CAD/CAM polymers after various surface conditioning methods , 2013, Acta odontologica Scandinavica.

[23]  R. G. Chadwick,et al.  Fibre reinforcement of two temporary composite bridge materials--effect upon flexural properties. , 2012, Journal of dentistry.

[24]  Josef Schweiger,et al.  CAD/CAM-generated high-density polymer restorations for the pretreatment of complex cases: a case report. , 2012, Quintessence international.

[25]  V. Migonney,et al.  Resin composite blocks via high-pressure high-temperature polymerization. , 2012, Dental materials : official publication of the Academy of Dental Materials.

[26]  C. Hämmerle,et al.  Load-bearing capacity of CAD/CAM milled polymeric three-unit fixed dental prostheses: Effect of aging regimens , 2012, Clinical Oral Investigations.

[27]  M. Balkenhol,et al.  Fracture strength of temporary fixed partial dentures: CAD/CAM versus directly fabricated restorations. , 2011, Dental materials : official publication of the Academy of Dental Materials.

[28]  P. Magne,et al.  Thickness of CAD-CAM composite resin overlays influences fatigue resistance of endodontically treated premolars. , 2009, Dental materials : official publication of the Academy of Dental Materials.

[29]  F. Beuer,et al.  Digital dentistry: an overview of recent developments for CAD/CAM generated restorations , 2008, BDJ.

[30]  M. Eisenburger,et al.  Load-bearing capacity of direct four unit provisional composite bridges with fibre reinforcement. , 2008, Journal of oral rehabilitation.

[31]  K. Reis,et al.  INFLUENCE OF DIFFERENT CANTILEVER EXTENSIONS AND GLASS OR POLYARAMID REINFORCEMENT FIBERS ON FRACTURE STRENGTH OF IMPLANT-SUPPORTED TEMPORARY FIXED PROSTHESIS , 2008, Journal of applied oral science : revista FOB.

[32]  R. Shinkai,et al.  Medial mandibular flexure and maximum occlusal force in dentate adults. , 2006, The International journal of prosthodontics.