A novel E-core flux-switching PM brushless AC machine

A novel E-core flux-switching PM (FSPM) brushless machine is proposed, and its electromagnetic performance is compared with that of the conventional FSPM brushless machine. The operation principle of the E-core FSPM machine will be firstly described and the influence of stator and rotor pole number combinations is investigated, while the electromagnetic performance of the optimized E-core FSPM machine is predicted by finite element analyses and validated by experiment. It is shown that the number and volume of magnets in the E-core FSPM machine is significantly reduced - only half of that in the conventional machine, while the phase back-emf and torque of the E-core machine are ∼15% larger than those of the conventional machine.

[1]  N. Takorabet,et al.  Double channel PM motor for avionic applications: impact of winding topologies , 2009, 2009 IEEE Energy Conversion Congress and Exposition.

[2]  D. Howe,et al.  Analysis of electromagnetic performance of flux-switching permanent-magnet Machines by nonlinear adaptive lumped parameter magnetic circuit model , 2005, IEEE Transactions on Magnetics.

[3]  Hamid Ben Ahmed,et al.  Switching flux permanent magnet polyphased synchronous machines , 1997 .

[4]  D. Howe,et al.  Stator and Rotor Pole Combinations for Multi-Tooth Flux-Switching Permanent-Magnet Brushless AC Machines , 2008, IEEE Transactions on Magnetics.

[5]  Nicola Bianchi,et al.  Use of the star of slots in designing fractional-slot single-layer synchronous motors , 2006 .

[6]  P. Viarouge,et al.  Synthesis of High-Performance PM Motors with Concentrated Windings , 2002, IEEE Power Engineering Review.

[7]  Chris Gerada,et al.  Novel fault tolerant design of flux switching machines , 2010 .

[8]  Wei Hua,et al.  Comparison of electromagnetic performance of brushless motors having magnets in stator and rotor , 2008 .

[9]  Hongyun Jia,et al.  A redundant flux-switching permanent magnet motor drive for fault-tolerant applications , 2008, 2008 IEEE Vehicle Power and Propulsion Conference.

[10]  Z. Zhu,et al.  Winding Configurations and Optimal Stator and Rotor Pole Combination of Flux-Switching PM Brushless AC Machines , 2010, IEEE Transactions on Energy Conversion.

[11]  Massimo Barcaro,et al.  Configurations of fractional-slot IPM Motors with dual three-phase winding , 2009, 2009 IEEE International Electric Machines and Drives Conference.

[12]  Z Q Zhu,et al.  Comparison of All- and Alternate-Poles-Wound Flux-Switching PM Machines Having Different Stator and Rotor Pole Numbers , 2009, IEEE Transactions on Industry Applications.

[13]  Z.Q. Zhu,et al.  Alternate Poles Wound Flux-Switching Permanent-Magnet Brushless AC Machines , 2010, IEEE Transactions on Industry Applications.

[14]  Zhejie Liu,et al.  Analysis of Unbalanced-Magnetic-Pulls in hard disk drive spindle motors using a hybrid method , 1996 .

[15]  R. Nilssen,et al.  Characteristic investigations of a new three-phase flux-switching permanent magnet machine by FEM simulations and experimental verification , 2009, 2009 International Conference on Electrical Machines and Systems.

[16]  Bernard Multon,et al.  Influence of magnetic losses on maximum power limits of synchronous permanent magnet drives in flux-weakening mode , 2000, Conference Record of the 2000 IEEE Industry Applications Conference. Thirty-Fifth IAS Annual Meeting and World Conference on Industrial Applications of Electrical Energy (Cat. No.00CH37129).

[17]  Jiabin Wang,et al.  Design Considerations for Tubular Flux-Switching Permanent Magnet Machines , 2008, IEEE Transactions on Magnetics.

[18]  J. Haylock,et al.  A comparative study of permanent magnet and switched reluctance motors for high performance fault tolerant applications , 1995, IAS '95. Conference Record of the 1995 IEEE Industry Applications Conference Thirtieth IAS Annual Meeting.

[19]  Geraint W. Jewell,et al.  Fault-Tolerant Flux-Switching Permanent Magnet Brushless AC Machines , 2008, 2008 IEEE Industry Applications Society Annual Meeting.

[20]  S. E. Rauch,et al.  Design Principles of Flux-Switch Alternators [includes discussion] , 1955, Transactions of the American Institute of Electrical Engineers. Part III: Power Apparatus and Systems.

[21]  E. Hoang,et al.  A new structure of a switching flux synchronous polyphased machine with hybrid excitation , 2007, 2007 European Conference on Power Electronics and Applications.

[22]  Z. Zhu,et al.  Advanced Flux-Switching Permanent Magnet Brushless Machines , 2010, IEEE Transactions on Magnetics.

[23]  D. Howe,et al.  Comparative study of flux-switching and interior permanent magnet machines , 2007, 2007 International Conference on Electrical Machines and Systems (ICEMS).

[24]  G. Jewell,et al.  Cogging Torque in Flux-Switching Permanent Magnet Machines , 2009, IEEE Transactions on Magnetics.

[25]  Z.Q. Zhu,et al.  Comparison of PM brushless motors, having either all teeth or alternate teeth wound , 2006, IEEE Transactions on Energy Conversion.

[26]  B. Mecrow,et al.  A wound-field three-phase flux-switching synchronous motor with all excitation sources on the stator , 2009, 2009 IEEE Energy Conversion Congress and Exposition.