Flash spark plasma sintering of zirconia nanoparticles: Electro-thermal-mechanical-microstructural simulation and scalability solutions
暂无分享,去创建一个
[1] X. Xi,et al. DC electric field‐assisted hot pressing of zirconia: Methodology, phenomenology, and sintering mechanism , 2021, Journal of the American Ceramic Society.
[2] S. Marinel,et al. Porous stage assessment of pressure assisted sintering modeling parameters: a ceramic identification method insensitive to final stage grain growth disturbance , 2021 .
[3] B. Lenoir,et al. Issues and opportunities from Peltier effect in functionally-graded colusites: From SPS temperature modeling to enhanced thermoelectric performances , 2021 .
[4] C. Dancer,et al. Promoting microstructural homogeneity during flash sintering of ceramics through thermal management , 2021, MRS Bulletin.
[5] R. Epherre,et al. Simple method for the identification of electrical and thermal contact resistances in spark plasma sintering , 2021, Journal of the European Ceramic Society.
[6] S. Marinel,et al. Impact of convection and radiation on direct/hybrid heating stability of field assisted sintering , 2020 .
[7] E. Olevsky,et al. Graphite creep negation during flash spark plasma sintering under temperatures close to 2000 °C , 2020, 2011.14011.
[8] E. Olevsky,et al. Modeling zirconia sintering trajectory for obtaining translucent submicronic ceramics for dental implant applications , 2020, Acta Materialia.
[9] E. Olevsky,et al. Electric current effects in spark plasma sintering: From the evidence of physical phenomenon to constitutive equation formulation , 2019, Scripta Materialia.
[10] V. Sglavo,et al. Flash sintering of ceramics , 2019, Journal of the European Ceramic Society.
[11] E. Olevsky,et al. Simultaneous Spark Plasma Sintering of Multiple Complex Shapes , 2019, Materials.
[12] V. Sglavo,et al. Investigation of Electrochemical, Optical and Thermal Effects during Flash Sintering of 8YSZ , 2018, Materials.
[13] E. Olevsky,et al. Effect of electric current on densification behavior of conductive ceramic powders consolidated by spark plasma sintering , 2018 .
[14] R. Chaim,et al. On thermal runaway and local endothermic/exothermic reactions during flash sintering of ceramic nanoparticles , 2018, Journal of Materials Science.
[15] E. Olevsky,et al. Proportional integral derivative, modeling and ways of stabilization for the spark plasma sintering process , 2020, 2011.11633.
[16] E. Olevsky,et al. Porosity dependence of powder compaction constitutive parameters: Determination based on spark plasma sintering tests , 2017, 2011.10768.
[17] E. Olevsky,et al. All-Materials-Inclusive Flash Spark Plasma Sintering , 2017, Scientific Reports.
[18] M. Brochu,et al. Spark plasma sintering and spark plasma upsetting of an Al-Zn-Mg-Cu alloy , 2017 .
[19] E. Olevsky,et al. Fluid dynamics thermo-mechanical simulation of sintering: Uniformity of temperature and density distributions , 2017 .
[20] S. Grasso,et al. Flash spark plasma sintering of cold-Pressed TiB2-hBN , 2017 .
[21] M. Bellet,et al. In-situ creep law determination for modeling Spark Plasma Sintering of TiAl 48-2-2 powder , 2017 .
[22] E. Olevsky,et al. Fully coupled electromagnetic-thermal-mechanical comparative simulation of direct vs hybrid microwave sintering of 3Y-ZrO2 , 2017, 2011.14008.
[23] Jinyong Zhang,et al. Ultra-fast firing: Effect of heating rate on sintering of 3YSZ, with and without an electric field , 2017 .
[24] E. Olevsky,et al. Current understanding and future research directions at the onset of the next century of sintering science and technology , 2017 .
[25] S. Grasso,et al. Peltier effect during spark plasma sintering (SPS) of thermoelectric materials , 2017, Journal of Materials Science.
[26] K. van Benthem,et al. Temperature gradient and microstructure evolution in AC flash sintering of 3 mol% yttria-stabilized zirconia , 2017 .
[27] H. Desplats,et al. Contact resistances in spark plasma sintering: From in-situ and ex-situ determinations to an extended model for the scale up of the process , 2017 .
[28] E. Olevsky,et al. Inherent heating instability of direct microwave sintering process: Sample analysis for porous 3Y-ZrO 2 , 2017, 2011.12403.
[29] R. Chaim. Particle Surface Softening as Universal Behaviour during Flash Sintering of Oxide Nano-Powders , 2017, Materials.
[30] S. Grasso,et al. Review of flash sintering: materials, mechanisms and modelling , 2017 .
[31] S. Grasso,et al. Rapid sintering of anisotropic, nanograined Nd–Fe–B by flash-spark plasma sintering , 2016 .
[32] C. Dancer. Flash sintering of ceramic materials , 2016 .
[33] E. Olevsky,et al. Flash (Ultra-Rapid) Spark-Plasma Sintering of Silicon Carbide , 2016, Scientific Reports.
[34] E. Olevsky,et al. Evolution of anisotropy in hierarchical porous ceramics during sinter-forging , 2016 .
[35] Y. Sakka,et al. Flash spark plasma sintering of ultrafine yttria-stabilized zirconia ceramics , 2016 .
[36] C. Estournès,et al. Identification of the Norton‐Green Compaction Model for the Prediction of the Ti–6Al–4V Densification During the Spark Plasma Sintering Process , 2016 .
[37] S. Grasso,et al. Flash Spark Plasma Sintering (FSPS) of α and β SiC , 2016 .
[38] Jinyong Zhang,et al. Ultra-fast densification of boron carbide by flash spark plasma sintering , 2016 .
[39] S. Grasso,et al. Ultra-Rapid Crystal Growth of Textured SiC Using Flash Spark Plasma Sintering Route , 2016 .
[40] M. Harmer,et al. Expanding time–temperature-transformation (TTT) diagrams to interfaces: A new approach for grain boundary engineering , 2016 .
[41] C. Estournès,et al. Finite-element modeling of the electro-thermal contacts in the spark plasma sintering process , 2016 .
[42] Christopher D. Haines,et al. Experimental Investigation of Electric Contact Resistance in Spark Plasma Sintering Tooling Setup , 2015 .
[43] C. Estournès,et al. Pulse analysis and electric contact measurements in spark plasma sintering , 2015 .
[44] M. Belmonte,et al. Effects of Current Confinement on the Spark Plasma Sintering of Silicon Carbide Ceramics , 2015 .
[45] J. Monchoux,et al. Electromigration experiments by spark plasma sintering in the silver–zinc system , 2015 .
[46] R. S. Bonilla,et al. Electrical characteristics of flash sintering: thermal runaway of Joule heating , 2015 .
[47] D. Gómez-García,et al. Ultra-fast and energy-efficient sintering of ceramics by electric current concentration , 2015, Scientific Reports.
[48] William E Lee,et al. Flash Spark Plasma Sintering (FSPS) of Pure ZrB2 , 2014 .
[49] M. Harmer,et al. Grain Boundary Complexions , 2014 .
[50] S. Bonilla,et al. Preliminary investigation of flash sintering of SiC , 2013 .
[51] C. Estournès,et al. Electro-thermal measurements and finite element method simulations of a spark plasma sintering device , 2013 .
[52] J. Narayan. A new mechanism for field-assisted processing and flash sintering of materials , 2013 .
[53] E. Olevsky,et al. Ponderomotive effects during contact formation in microwave sintering , 2013 .
[54] S. Risbud,et al. Preface and historical perspective on spark plasma sintering , 2013 .
[55] Christopher D. Haines,et al. Fundamental Aspects of Spark Plasma Sintering: II. Finite Element Analysis of Scalability , 2012 .
[56] E. Olevsky,et al. The microwave ponderomotive effect on ceramic sintering , 2012 .
[57] R. Chaim. Electric field effects during spark plasma sintering of ceramic nanoparticles , 2012, Journal of Materials Science.
[58] M. Cologna,et al. Influence of Externally Imposed and Internally Generated Electrical Fields on Grain Growth, Diffusional Creep, Sintering and Related Phenomena in Ceramics , 2011 .
[59] M. Cologna,et al. Flash Sintering of Nanograin Zirconia in <5 s at 850°C , 2010 .
[60] Fancheng Meng,et al. The nature of grain boundaries in alumina fabricated by fast sintering , 2010 .
[61] J. Galy,et al. Temperature Control in Spark Plasma Sintering: An FEM Approach , 2010 .
[62] L. Froyen,et al. Consolidation enhancement in spark-plasma sintering: Impact of high heating rates , 2007 .
[63] L. Froyen,et al. Constitutive modeling of spark-plasma sintering of conductive materials , 2006 .
[64] K. Vanmeensel,et al. Modelling of the temperature distribution during field assisted sintering , 2005 .
[65] Zuhair A. Munir,et al. Fundamental investigations on the spark plasma sintering/synthesis process: II. Modeling of current and temperature distributions , 2005 .
[66] M. Mori,et al. Thermal expansion coefficient of yttria stabilized zirconia for various yttria contents , 2005 .
[67] J. Groza,et al. Temperature evolution during field activated sintering , 2004 .
[68] H. Conrad. Electroplasticity in metals and ceramics , 2000 .
[69] Carsten Korte,et al. Electrochemical blackening of yttria-stabilized zirconia – morphological instability of the moving reaction front , 1999 .
[70] Eugene A. Olevsky,et al. Theory of sintering: from discrete to continuum , 1998 .
[71] Mel I. Mendelson,et al. Average Grain Size in Polycrystalline Ceramics , 1969 .