High performance of space vector modulation direct torque control SVM-DTC based on amplitude voltage and stator flux angle

Various aspects related to controlling induction motor are investigated. Direct torque control is an original high performance control strategy in the field of AC drive. In this proposed method, the control system is based on Space Vector Modulation (SVM), amplitude of voltage in direct- quadrature reference frame (d-q reference) and angle of stator flux. Amplitude of stator voltage is controlled by PI torque and PI flux controller. The stator flux angle is adjusted by rotor angular frequency and slip angular frequency. Then, the reference torque and the estimated torque is applied to the input of PI torque controller and the control quadrature axis voltage is determined. The control d-axis voltage is determined from the flux calculator. These q and d axis voltage are converted into amplitude voltage. By applying polar to Cartesian on amplitude voltage and stator flux angle, direct voltage and quadratures voltage are generated. The reference stator voltages in d-q are calculated based on forcing the stator voltage error to zero at next sampling period. By applying inverse park transformation on d-q voltages, the stator voltages in α and β frame are generated and apply to SVM. From the output of SVM, the motor control signal is generated and the speed of the induction motor regulated toward the rated speed. The simulation Results have demonstrated exceptional performance in steady and transient states and shows that decrease of torque and flux ripples is achieved in a complete speed range.

[1]  S. Mahmoud,et al.  Torque ripple minimization for induction motor drives with direct torque control (DTC) , 2003, The Fifth International Conference on Power Electronics and Drive Systems, 2003. PEDS 2003..

[2]  Mengjia Jin,et al.  A fuzzy DTC method with a SVM defuzzification to permanent magnet synchronous machine , 2004, 30th Annual Conference of IEEE Industrial Electronics Society, 2004. IECON 2004.

[3]  Mario Pacas,et al.  Encoderless Predictive Direct Torque Control for Synchronous Reluctance Machines at Very Low and Zero Speed , 2008, IEEE Transactions on Industrial Electronics.

[4]  Antoni Arias,et al.  Novel direct torque control (DTC) scheme with fuzzy adaptive torque-ripple reduction , 2003, IEEE Trans. Ind. Electron..

[5]  Brahim Metidji,et al.  A New Fuzzy Direct Torque Control Strategy for Induction Machine Based on Indirect Matrix Converter , 2011 .

[6]  Renyuan Tang,et al.  Novel Direct Torque Control Based on Space Vector Modulation With Adaptive Stator Flux Observer for Induction Motors , 2010, IEEE Transactions on Magnetics.

[7]  Kwang Won Lee,et al.  A unified flux and torque control method for DTC-based induction-motor drives , 2006 .

[8]  S. Mahmoud,et al.  Torque Ripple Minimization for Induction Motor Drives with Direct Torque Control , 2005 .

[9]  M. Kazerani,et al.  A New Direct Torque Control Strategy for Induction Machine Based on Indirect Matrix Converter , 2006, 2006 IEEE International Symposium on Industrial Electronics.

[10]  Hongkui Li,et al.  DTC with adaptive stator flux observer and stator resistance estimator for induction motors , 2010, 2010 8th World Congress on Intelligent Control and Automation.

[11]  Gurpreet Kaur,et al.  Fuzzy logic based direct torque control of induction motor , 2009, 2009 IEEE Power & Energy Society General Meeting.

[12]  M. Pacas,et al.  Predictive direct torque control for the PM synchronous machine , 2005, IEEE Transactions on Industrial Electronics.

[13]  Xiaoyun Feng,et al.  An improved DTC algorithm for reducing torque ripples of PMSM based on fuzzy logic and SVM , 2010, 2010 International Conference on Artificial Intelligence and Education (ICAIE).

[14]  Abdul Ahad,et al.  NOVEL DIRECT TORQUE CONTROL BASED ON SPACE VECTOR MODULATION WITH ADAPTIVE STATOR FLUX OBSERVER FOR INDUCTION MOTORS , 2014 .

[15]  Giuseppe Buja,et al.  Direct stator flux and torque control of an induction motor: theoretical analysis and experimental results , 1998, IECON '98. Proceedings of the 24th Annual Conference of the IEEE Industrial Electronics Society (Cat. No.98CH36200).

[16]  Yen-Shin Lai,et al.  A New Approach to Direct Torque Control of Induction Motor Drives for Constant Inverter Switching Frequency and Torque Ripple Reduction Yen-Shin Lai, Member, IEEEand Jian-Ho Chen , 2001 .