A silhouetting shape sensor for the residual limb of a below-knee amputee

A shape sensor based on silhouette imaging techniques was developed to accurately and quickly measure the external geometry of the residual limb of a below-knee amputee. The sensor represents an improvement over previous residual limb imaging methods in that the resolution was higher, the scan-time was shorter, no ionizing radiation was used, and the technique was less sensitive to hair on the residual limb. The sensor will be used for investigative research of long-term (maturation) and short-term (diurnal) residual limb shape changes-information of critical importance to prosthetic fitting because of the effects of shape changes on stress distributions between the residual limb and prosthetic socket. The shape sensor uses a charged-coupled device video camera mounted to one end of an aluminum beam which is fixed at its other end to the shaft of a stepping motor, forming a simply supported cantilever. The motor accelerates the camera around the residual limb up to a constant angular velocity of 202.3/spl deg//s. During 216/spl deg/ of the constant-velocity portion of rotation, 17 images are captured at intervals of 13.5/spl deg/ and stored electronically to a computer. The images of the residual limb are then processed to produce silhouette contour outlines which are then used to reconstruct the three-dimensional residual limb shape. Using this silhouette imaging method, the sensor could measure the geometry of residual-limb areas susceptible to shape change with a radial resolution of 0.5 mm in a scan-time of 1.07 s. >

[1]  R H Meier,et al.  Stump-socket fit of below-knee prostheses: comparison of three methods of measurement. , 1973, Archives of physical medicine and rehabilitation.

[2]  G R Fernie,et al.  Shape sensing for computer aided below-knee prosthetic socket design , 1985, Prosthetics and orthotics international.

[3]  Virgil W. Faulkner,et al.  Computer Designed Prosthetic Socket from Analysis of Computed Tomography Data , 1989 .

[4]  J L Lancaster,et al.  Basic theory, design, and preliminary evaluation of a laser scanner for shape sensing below-the-knee amputees. , 1990, Medical physics.

[5]  Marius C. van Wijk.  Moiré Contourgraph — An accuracy analysis , 1980 .

[6]  Per Renström.  The below-knee amputee : a clinical study and experimental investigation on the circulation, muscle atrophy and strength of the amputated leg , 1981 .

[7]  S. Webb.  The Physics of Medical Imaging , 1990 .

[8]  Jonathan Kofman,et al.  The CAPOD System — A Scandinavian CAD/CAM System for Prosthetic Sockets , 1989 .

[9]  Ian R. Wood,et al.  The CANFIT System: Shape Management Technology for Prosthetic and Orthotic Applications , 1989 .

[10]  Dudley S. Childress,et al.  Surface curvature analysis for enhanced computer-aided-design of prosthetic sockets , 1993, Proceedings of the 15th Annual International Conference of the IEEE Engineering in Medicine and Biology Societ.

[11]  G R Fernie,et al.  Shape sensing as an educational aid for student prosthetists , 1984, Prosthetics and orthotics international.

[12]  Jack L. Lancaster,et al.  A Computerized System to Manufacture Prostheses for Amputees in Developing Countries , 1989 .

[13]  G. W. Vickers,et al.  A Generalized Approach to the Replication of Cylindrical Bodies With Compound Curvature , 1984 .

[14]  P J Holliday,et al.  Volume fluctuations in the residual limbs of lower limb amputees. , 1982, Archives of physical medicine and rehabilitation.

[15]  A. I. Chahande,et al.  Identification of load bearing areas for prosthetic limbs in a below-the-knee amputee using neural networks , 1993, Proceedings of the 15th Annual International Conference of the IEEE Engineering in Medicine and Biology Societ.