A New Kind of Al-5Ti-0.3C Master Alloy and Its Refining Performance on 6063 Alloy

[1]  Ping Zhang,et al.  Influence of a new kind of Al–Ti–C master alloy on the microstructure and mechanical properties of Al–5Cu alloy , 2014 .

[2]  J. Cui,et al.  Effect of vanadium on the microstructures and mechanical properties of an Al–Mg–Si–Cu–Cr–Ti alloy of 6XXX series , 2013 .

[3]  P. Grant,et al.  Influence of cooling rate on the Fe intermetallic formation in an AA6063 Al alloy , 2013 .

[4]  S. Babu,et al.  Effect of grain size refinement and precipitation reactions on strengthening in friction stir processed Al–Cu alloys , 2011 .

[5]  N. Mahallawy,et al.  Wear properties of ECAP-processed ultrafine grained Al–Cu alloys , 2010 .

[6]  P. Lin,et al.  Corrosion behavior of ultra-fine grained industrial pure Al fabricated by ECAP , 2009 .

[7]  Xiangfa Liu,et al.  The effect of melting temperature and time on the TiC particles , 2009 .

[8]  Tu Ying-hong,et al.  Some suggestions about the revision of the National Standard GB/T228-2002 "Metallic materials-Tensile testing at ambient temperature" , 2009 .

[9]  P. Uggowitzer,et al.  The influence of MgSi particle reactivity and dissolution processes on corrosion in Al–Mg–Si alloys , 2008 .

[10]  H. Ding,et al.  Influence of zirconium on grain refining efficiency of Al–Ti–C master alloys , 2007 .

[11]  Y. Birol.  Production of Al–Ti–B master alloys from Ti sponge and KBF4 , 2007 .

[12]  G. González,et al.  Effect of 0.1% vanadium addition on precipitation behavior and mechanical properties of Al-6063 commercial alloy , 2006 .

[13]  P. Schaffer,et al.  Settling behaviour of different grain refiners in aluminium , 2005 .

[14]  B. S. Murty,et al.  Development of Al-Ti-C grain refiners and study of their grain refining efficiency on Al and Al-7Si alloy , 2005 .

[15]  A. L. Greer,et al.  The effect of the size distribution of inoculant particles on as-cast grain size in aluminium alloys , 2004 .

[16]  A. Kennedy,et al.  The thermal stability of TiC particles in an Al7wt.%Si alloy , 2003 .

[17]  Peter Schumacher,et al.  Grain Refinement of Aluminium Alloys by Inoculation , 2003 .

[18]  D. StJohn,et al.  A model of grain refinement incorporating alloy constitution and potency of heterogeneous nucleant particles , 2001 .

[19]  A. L. Greer,et al.  Effect of instability of TiC particles ongrain refinement of Al and Al–Mg alloysby addition of Al–Ti–C inoculants , 2000 .

[20]  Z. Szklarska‐Śmiałowska.  Pitting corrosion of aluminum , 1999 .

[21]  S. Nam,et al.  Enhancement of mechanical properties of Al–Mg–Si alloys by means of manganese dispersoids , 1999 .

[22]  David H. StJohn,et al.  Grain refinement of aluminum alloys: Part II. Confirmation of, and a mechanism for, the solute paradigm , 1999 .

[23]  K. Chan,et al.  Technical Note: Photoelectrochemical Study of Inorganic Inhibitor Films Formed on Mild Steel in Aerated Municipal Water , 1998 .