论文信息 - 321 W average power, 1 GHz, 20 ps, 1060 nm pulsed fiber MOPA source

321 W average power, 1 GHz, 20 ps, 1060 nm pulsed fiber MOPA source

Pulses from a gain-switched laser diode were amplified in a fiber MOPA system to produce in excess of 320 W of average power in 20 ps pulses at 1 GHz repetition rate at 1060 nm.

[1] Rüdiger Paschotta,et al. Powerful red-green-blue laser source pumped with a mode-locked thin disk laser. , 2004, Optics letters.

[2] A. Tünnermann,et al. Femtosecond, picosecond and nanosecond laser ablation of solids , 1996 .

[3] Y. Jeong,et al. Ytterbium-doped large-core fiber laser with 1.36 kW continuous-wave output power. , 2004, Optics express.

[4] B. Thomsen,et al. 11.1 W average power, 20 ps pulses at 1 GHz repetition rate from a fiber-amplified gain-switched 1.06 /spl mu/m Fabry-Perot laser diode , 2005, (CLEO). Conference on Lasers and Electro-Optics, 2005..

[5] Yoh Ogawa,et al. Generation of an extremely short single mode pulse (∼2 ps) by fiber compression of a gain‐switched pulse from a 1.3 μm distributed‐feedback laser diode , 1991 .

[6] J. Limpert,et al. Low-nonlinearity single-transverse-mode ytterbium-doped photonic crystal fiber amplifier. , 2004, Optics express.

[7] S. Kutsuzawa,et al. Generation of wavelength tunable gain-switched pulses from FP MQW lasers with external injection seeding , 1997, IEEE Photonics Technology Letters.

[8] J. Kirchhof,et al. 1.3 kW Yb-doped fiber laser with excellent beam quality , 2004, Conference on Lasers and Electro-Optics, 2004. (CLEO)..

[9] Ivan P. Kaminow,et al. Picosecond pulse generation from InGaAsP lasers at 1.25 and 1.3 µm by electrical pulse pumping , 1981 .

[10] J. Limpert,et al. High-average-power picosecond Yb-doped fiber amplifier. , 2001, Optics letters.