INVERSE VOF MESHLESS METHOD FOR EFFICIENT NON-DESTRUCTIVE THERMOGRAPHIC EVALUATION

A novel computational tool based on the Localized Radial-basis Function (RBF) Collocation (LRC) Meshless method coupled with a Volume-of- Fluid (VoF) scheme capable of accurately and efficiently solving transient multi-dimensional heat conduction problems in composite and heterogeneous media is formulated and implemented. While the LRC Meshless method lends its inherent advantages of spectral convergence and ease of automation, the VoF scheme allows to effectively and efficiently simulate the location, size, and shape of cavities, voids, inclusions, defects, or de-attachments in the conducting media without the need to regenerate point distributions, boundaries, or interpolation matrices. To this end, the Inverse Geometric problem of Cavity Detection can be formulated as an optimization problem that minimizes an objective function that computes the deviation of measured temperatures at accessible locations to those generated by the LRC-VoF Meshless method. The LRC-VoF Meshless algorithms will be driven by an optimization code based on the Simplex Linear Programming algorithm which can efficiently search for the optimal set of design parameters (location, size, shape, etc.) within a predefined design space. Initial guesses to the search algorithm will be provided by the classical 1D semi-infinite composite analytical solution which can predict the approximate location of the cavity. The LRC-VoF formulation is tested and validated through a series of controlled numerical experiments. The proposed approach will allow solving the onerous computational inverse geometric problem in a very efficient and robust manner while affording its implementation in modest computational platforms, thereby realizing the disruptive potential of the proposed multi- dimensional high-fidelity non-destructive evaluation (NDE) method.

[1]  D. Gottlieb,et al.  Numerical analysis of spectral methods : theory and applications , 1977 .

[2]  B. Blackwell,et al.  Inverse Heat Conduction: Ill-Posed Problems , 1985 .

[3]  Alain J. Kassab,et al.  Localized Meshless Modeling of Natural-Convective Viscous Flows , 2008 .

[4]  T. J. Martin,et al.  Geometrical inverse problems in three-dimensional non-linear steady heat conduction , 1995 .

[5]  T. Belytschko,et al.  Element‐free Galerkin methods , 1994 .

[6]  Alain J. Kassab,et al.  An Efficient Localized Radial Basis Function Meshless Method for Fluid Flow and Conjugate Heat Transfer , 2007 .

[7]  D. Bray.  Nondestructive Evaluation , 2018 .

[8]  John A. Nelder,et al.  A Simplex Method for Function Minimization , 1965, Comput. J..

[9]  C. K. Hsieh,et al.  A Methodology of Predicting Cavity Geometry Based on the Scanned Surface Temperature Data—Prescribed Heat Flux at the Cavity Side , 1981 .

[10]  Lawrence C. Bank,et al.  Composites for Construction , 2014 .

[11]  Alain J. Kassab,et al.  Numerical solution of the two-phase incompressible Navier–Stokes equations using a GPU-accelerated meshless method , 2014 .

[13]  C. W. Hirt,et al.  Volume of fluid (VOF) method for the dynamics of free boundaries , 1981 .

[14]  Luke S. Lee,et al.  Methods for Detecting Defects in Composite Rehabilitated Concrete Structures , 2005 .

[15]  R. Białecki,et al.  Explicit calculation of smoothed sensitivity coefficients for linear problems , 2003 .

[16]  Alain J. Kassab,et al.  An evolutionary‐based inverse approach for the identification of non‐linear heat generation rates in living tissues using a localized meshless method , 2008 .

[17]  Kevin J. Dowding,et al.  DEVELOPMENT AND IMPLEMENTATION OF SENSITIVITY COEFFICIENT EQUATIONS FOR HEAT CONDUCTION PROBLEMS , 1997 .

[18]  Timothy Ibell,et al.  Strengthening concrete structures with fibre composite materials: Updating technical report TR55 , 2004 .

[19]  Miguel Cerrolaza,et al.  Cavity detection in biomechanics by an inverse evolutionary point load BEM technique , 2008 .

[20]  Z. El Zahab,et al.  A meshless CFD approach for evolutionary shape optimization of bypass grafts anastomoses , 2009 .

[21]  A. Kassab,et al.  An Inverse Localized Meshless Technique for the Determination of Non-Linear Heat Generation Rates in Living Tissue , 2006 .

[22]  A. J. Kassab,et al.  Boundary element method for heat conduction : with applications in non-homogeneous media , 2003 .

[23]  Stephanie L. Walkup,et al.  Guide for the Design and Construction of Externally Bonded FRP Systems for Strengthening Concrete Structures (ACI 440.2R-02) , 2005 .

[24]  E. Kansa.  Multiquadrics—A scattered data approximation scheme with applications to computational fluid-dynamics—I surface approximations and partial derivative estimates , 1990 .

[25]  Paolo Cielo,et al.  Thermographic Nondestructive Evaluation: Data Inversion Procedures Part I: 1-D Analysis , 1991 .

[26]  J D Shave,et al.  Design guidance for strengthening concrete structures using fibre composite materials:report of a Concrete Society Working Party , 2012 .

[27]  Nicholas J. Carino,et al.  Preliminary Thermography Studies for Quality Control of Concrete Structures Strengthened with Fiber-Reinforced Polymer Composites , 2003 .

[28]  D. Lesnic,et al.  A survey of applications of the MFS to inverse problems , 2011 .

[29]  C. Brebbia,et al.  Boundary Element Techniques , 1984 .

[30]  R. L. Hardy.  Multiquadric equations of topography and other irregular surfaces , 1971 .

[31]  Alfio Quarteroni,et al.  Spectral and Pseudo-Spectral Approximations of the Navier–Stokes Equations , 1982 .

[32]  H. R. Hamilton,et al.  Heating Methods and Detection Limits for Infrared Thermography Inspection of Fiber-Reinforced Polymer Composites , 2007 .

[33]  Michael N. Fardis,et al.  fib Bulletin 35. Retrofitting of concrete structures by externally bonded FRPs with emphasis on seismic applications , 2006 .

[34]  R. Franke.  Scattered data interpolation: tests of some methods , 1982 .

[35]  Robert Vertnik,et al.  Meshfree explicit local radial basis function collocation method for diffusion problems , 2006, Comput. Math. Appl..

[36]  S. Luke,et al.  Strengthening concrete structures using fibre composites , 2004 .

[37]  Alain J. Kassab,et al.  AN EFFICIENT SINGULAR SUPERPOSITION TECHNIQUE FOR CAVITY DETECTION AND SHAPE OPTIMIZATION , 2004 .

[38]  G. Fasshauer.  RBF Collocation Methods As PseudospectralMethods , 2005 .

[39]  Alexander G. Ramm,et al.  A geometrical inverse problem , 1986 .

[40]  Alain J. Kassab,et al.  A meshless method for conjugate heat transfer problems , 2005 .

[41]  G. R. Liu,et al.  1013 Mesh Free Methods : Moving beyond the Finite Element Method , 2003 .

[42]  Alain J. Kassab,et al.  A model-integrated localized collocation meshless method for large scale three-dimensional heat transfer problems , 2014 .

[43]  E. Kansa,et al.  Exponential convergence and H‐c multiquadric collocation method for partial differential equations , 2003 .

[44]  H. Hamilton,et al.  Quantitative infrared thermography inspection for FRP applied to concrete using single pixel analysis , 2013 .