Pulsating characteristic of the hydraulic hybrid vehicle system with pipeline effect

The configuration and working principle of hydraulic hybrid vehicle (HHV) based on the hydraulic transformer (HT) were described to extend its energy-regenerated potential. The approximate algorithm of basic elements for pipeline distributed parameter model was summarized to simplify the pipeline model calculation, and the various basic elements of this method were proven to be used in the practical application by comparison with the experimentally validated Zhao and Hullender model. The pressure pulsation characteristics between the HT and accumulator of the HHV by considering Zhao model, Hullender model, and original pipeline approximate model was analyzed to optimize the system structure design by the method of the mathematical model, which mainly includes the series accumulator and parallel accumulator, respectively. The simulation result shows that the series accumulator was better than the parallel accumulator in terms of pulsation damping of hydraulic transformer with considering the pipeline effect. The test-rig result shows that the theoretical analysis of the pulsation between the HT and accumulator with pipeline was very close to the measurement data of the experiment in the curve trend, where the theoretical analysis results of pulsation characteristic for HHV were appropriate and reasonable.

[1]  Shun An Liu,et al.  Dynamic analysis of energy storage unit of the hydraulic hybrid vehicle , 2013 .

[2]  S. Ikeo,et al.  Study on Hybrid Vehicle Using Constant Pressure Hydraulic System with Flywheel for Energy Storage , 2004 .

[3]  Sun Hui,et al.  Torque control strategy for a parallel hydraulic hybrid vehicle , 2009 .

[4]  王建华,et al.  The hybrid transmission , 2012 .

[5]  R. Oldenburger,et al.  Simplification of Hydraulic Line Dynamics by Use of Infinite Products , 1964 .

[6]  Zhao Fu,et al.  The Innas Hydraulic Transformer The Key to the Hydrostatic Common Pressure Rail , 2000 .

[7]  Bing Xu.  DISPLACEMENT OF HYDRAULIC TRANSFORMER , 2006 .

[8]  Bing Xu.  Analysis of instantaneous flow rate character of hydraulic transformer , 2007 .

[9]  W. E. Tobler,et al.  Dissipative Modal Approximation of Fluid Transmission Lines Using Linear Friction Model , 1991 .

[10]  Dong Peng,et al.  Advanced Braking Control System for Hybrid Electric Vehicle Using Fuzzy Control Logic , 2006 .

[11]  D N Johnston,et al.  Modelling of transient flow in hydraulic pipelines , 1997 .

[12]  Guoqing Liu,et al.  Parameter matchin and optimization for a hydraulic power-assistant system , 2010 .

[13]  D. A. Hullender,et al.  Modal approximations for the fluid dynamics of hydraulic and pneumatic transmission lines , 1983 .

[14]  R. Woods,et al.  COMPARISON OF THEORETICAL AND EXPERIMENTAL FLUID LINE RESPONSES WITH SOURCE AND LOAD IMPEDANCES. , 1983 .

[15]  Huayong Yang.  DEVELOPMENT OF HYDRAULIC TRANSFORMER , 2003 .

[16]  Torsten Kohmäscher,et al.  DESIGN AND FUEL ECONOMY OF A SERIES HYDRAULIC HYBRID VEHICLE , 2008 .

[17]  Tao Shang,et al.  Characteristic analysis of hydraulic hybrid vehicle based on limit cycle , 2012 .

[18]  Yang Song.  Research on Optimization Energy-saving Control Algorithm of the Hydraulic Hybrid Vehicle , 2010 .

[19]  Bohdan T. Kulakowski,et al.  Modal Approximation of Distributed Dynamics for a Hydraulic Transmission Line With Pressure Input-Flow Rate Output Causality , 2005 .

[20]  Massimo Sorli,et al.  Time Domain Fluid Transmission Line Modelling using a Passivity Preserving Rational Approximation of the Frequency Dependent Transfer Matrix , 2006 .

[21]  Jacek S. Stecki,et al.  Development and Simulation of a Hydraulic-Hybrid Powertrain for use in Commercial Heavy Vehicles , 2003 .

[22]  Shang Tao.  Pulsating characteristic of optimal structure of hydraulic hybrid vehicle , 2011 .

[23]  A. J. Healey,et al.  Rational polynomial approximations for fluid transmission line models , 1981 .

[24]  Robert Piche,et al.  Fluid Transmission Line Modeling Using a Variational Method , 2000 .

[25]  Sun Hui,et al.  Multi-objective optimization for hydraulic hybrid vehicle based on adaptive simulated annealing genetic algorithm , 2010, Eng. Appl. Artif. Intell..