Modeling and Analysis of a Fast and Robust Module-Integrated Analog Photovoltaic MPP Tracker

Analog circuitry-based photovoltaic (PV) maximum power point (MPP) tracking (MPPT) technique is attractive due to its low cost and capability of easy integration with normal dc-dc switching converters. However, realization of classical digital MPPT algorithms using analog circuitries is a challenging task. It necessarily requires to store the information of module voltage/current and power in order to find the desired MPP. While at the same time, improper design of digital MPPT controllers may cause poor tracking performances or limit cycle oscillations to manifest, which are generally seen as being undesirable. This paper proposes a fast and robust analog PV MPP tracker without imposing any external control or perturbation. The fast dynamic performances with absolute robustness are ensured here by integrating the concepts of Utkin's equivalent sliding mode control law and fast-scale stability analysis of actual switched converter systems. Moreover, the superiority of the proposed MPP tracker (in terms of high-tracking performances) over classical ones, and its impact in series-connected converters configuration are analytically demonstrated through the procedure developed in this paper. Finally, the analytical results have been validated by means of simulations and experiments.

[1]  Fred C. Lee,et al.  Analysis of Unified Output MPPT Control in Subpanel PV Converter System , 2014, IEEE Transactions on Power Electronics.

[2]  Fan Zhang,et al.  Adaptive Hybrid Maximum Power Point Tracking Method for a Photovoltaic System , 2013, IEEE Transactions on Energy Conversion.

[3]  Carlos Andrés Ramos-Paja,et al.  Granular control of photovoltaic arrays by means of a multi‐output Maximum Power Point Tracking algorithm , 2012 .

[4]  Somnath Maity,et al.  Dynamics and Stability Issues of a Discretized Sliding-Mode Controlled DC-DC Buck Converter Governed by Fixed-Event-Time Switching , 2013, IEEE Transactions on Circuits and Systems I: Regular Papers.

[5]  M. Vitelli,et al.  Guidelines for the Optimization of the P&O Technique in Grid-connected Double-stage Photovoltaic Systems , 2007, 2007 IEEE International Symposium on Industrial Electronics.

[6]  Massimo Vitelli,et al.  Distributed maximum power point tracking of photovoltaic arrays: Novel approach and system analysis , 2008, IEEE Transactions on Industrial Electronics.

[7]  D. C. Hamill,et al.  Simple maximum power point tracker for photovoltaic arrays , 2000 .

[8]  A. Bidram,et al.  Control and Circuit Techniques to Mitigate Partial Shading Effects in Photovoltaic Arrays , 2012, IEEE Journal of Photovoltaics.

[9]  Francesc Guinjoan,et al.  Energy-balance and sliding mode control strategies of a cascade H-bridge multilevel converter for grid-connected PV systems , 2010, 2010 IEEE International Conference on Industrial Technology.

[10]  Li Zhang,et al.  An Efficient Partial Power Processing DC/DC Converter for Distributed PV Architectures , 2014, IEEE Transactions on Power Electronics.

[11]  S. Maity,et al.  Analysis and Modeling of an FFHC-Controlled DC–DC Buck Converter Suitable for Wide Range of Operating Conditions , 2012, IEEE Transactions on Power Electronics.

[12]  Fred C. Lee,et al.  Large-signal stability analysis of spacecraft power processing systems , 1990 .

[13]  Yuncong Jiang,et al.  Adaptive Step Size With Adaptive-Perturbation-Frequency Digital MPPT Controller for a Single-Sensor Photovoltaic Solar System , 2013, IEEE Transactions on Power Electronics.

[14]  Antonios G. Kladas,et al.  Fast Photovoltaic-System Voltage- or Current-Oriented MPPT Employing a Predictive Digital Current-Controlled Converter , 2013, IEEE Transactions on Industrial Electronics.

[15]  R. C. N. Pilawa-Podgurski,et al.  Submodule Integrated Distributed Maximum Power Point Tracking for Solar Photovoltaic Applications , 2013, IEEE Transactions on Power Electronics.

[16]  Giovanni Petrone,et al.  An Hybrid Digital-Analog Sliding Mode Controller for Photovoltaic Applications , 2013, IEEE Transactions on Industrial Informatics.

[17]  S. Maity,et al.  A fixed frequency dual-mode DC-DC buck converter with fast-transient response and high efficiency over a wide load range , 2013, 2013 Twenty-Eighth Annual IEEE Applied Power Electronics Conference and Exposition (APEC).

[18]  Dushan Boroyevich,et al.  Theoretical and experimental investigation of the fast- and slow-scale instabilities of a DC-DC converter , 2001 .

[19]  Massimo Vitelli,et al.  A Technique for Improving P&O MPPT Performances of Double-Stage Grid-Connected Photovoltaic Systems , 2009, IEEE Transactions on Industrial Electronics.

[20]  Zhi-Hong Mao,et al.  Maximum Power Point Tracking Using Model Reference Adaptive Control , 2014, IEEE Transactions on Power Electronics.

[21]  Doron Shmilovitz,et al.  Maximum Power Point Tracking Employing Sliding Mode Control , 2013, IEEE Transactions on Circuits and Systems I: Regular Papers.

[22]  Eduard Alarcón,et al.  Design-Oriented Analysis of Quantization-Induced Limit Cycles in a Multiple-Sampled Digitally Controlled Buck Converter , 2014, IEEE Transactions on Circuits and Systems I: Regular Papers.

[23]  G.R. Walker,et al.  Cascaded DC-DC converter connection of photovoltaic modules , 2004, 2002 IEEE 33rd Annual IEEE Power Electronics Specialists Conference. Proceedings (Cat. No.02CH37289).

[24]  Carlos A. Canesin,et al.  Evaluation of the Main MPPT Techniques for Photovoltaic Applications , 2013, IEEE Transactions on Industrial Electronics.

[25]  Fred C. Lee,et al.  Analysis of unified output MPPT control in Sub-Panel PV converter system , 2013, 2013 15th European Conference on Power Electronics and Applications (EPE).

[26]  Pedro Ibañez,et al.  Analysis of Inverter-Voltage Influence on Distributed MPPT Architecture Performance , 2012, IEEE Transactions on Industrial Electronics.

[27]  Saad Mekhilef,et al.  Simulation and Hardware Implementation of Incremental Conductance MPPT With Direct Control Method Using Cuk Converter , 2011, IEEE Transactions on Industrial Electronics.

[28]  Damian Giaouris,et al.  Application of Filippov method for the analysis of subharmonic instability in dc–dc converters , 2009 .

[29]  Jan T. Bialasiewicz,et al.  Power-Electronic Systems for the Grid Integration of Renewable Energy Sources: A Survey , 2006, IEEE Transactions on Industrial Electronics.

[30]  M. Vitelli,et al.  Optimization of perturb and observe maximum power point tracking method , 2005, IEEE Transactions on Power Electronics.

[31]  Thomas I Seidman,et al.  Sliding Modes in Intersecting Switching Surfaces, Ii: Hysteresis , 1998 .

[32]  S. Buso,et al.  Analysis of limit cycle oscillations in maximum power point tracking algorithms , 2008, 2008 IEEE Power Electronics Specialists Conference.

[33]  P.L. Chapman,et al.  Comparison of Photovoltaic Array Maximum Power Point Tracking Techniques , 2007, IEEE Transactions on Energy Conversion.

[34]  Simone Buso,et al.  Low-Complexity MPPT Technique Exploiting the PV Module MPP Locus Characterization , 2009, IEEE Transactions on Industrial Electronics.

[35]  Yaow-Ming Chen,et al.  Modeling and Controller Design of an Autonomous PV Module for DMPPT PV Systems , 2014, IEEE Transactions on Power Electronics.

[36]  Giovanni Petrone,et al.  Design of a Sliding-Mode-Controlled SEPIC for PV MPPT Applications , 2014, IEEE Transactions on Industrial Electronics.

[37]  T. Suntio,et al.  Origin of Cross-Coupling Effects in Distributed DC–DC Converters in Photovoltaic Applications , 2013, IEEE Transactions on Power Electronics.

[38]  Andres Salazar-Llinas,et al.  A maximum power point tracker implementation for photovoltaic cells using dynamic optimal voltage tracking , 2010, 2010 Twenty-Fifth Annual IEEE Applied Power Electronics Conference and Exposition (APEC).

[39]  Carlos Andrés Ramos-Paja,et al.  A Fast Current-Based MPPT Technique Employing Sliding Mode Control , 2013, IEEE Transactions on Industrial Electronics.