An experimental study of bolt–hole clearance effects in double-lap, multi-bolt composite joints

Abstract An experimental study on the effects of variable bolt–hole clearance in double-lap, multi-bolt joints is presented. Joints with different clearances in each hole have been tested and the effects on load distribution, quasi-static strength, fatigue life and failure modes are reported. Strain gauges have been used for measuring load distribution and specialised jigs have been used for positioning the bolts in the holes and drilling the joints. The clearances examined ranged from neat-fit to clearances slightly larger than those allowed in the aircraft industry. Clearance has been found to have major effects on the load distribution; no effect on ultimate quasi-static strength but significant effect on failure initiation load; and quite significant effects on fatigue life.

[1]  B. Pradhan,et al.  Stresses Around Partial Contact Pin-Loaded Holes in FRP Composite Plates , 1984 .

[2]  F. L. Matthews.  Joining fibre-reinforced plastics , 1987 .

[3]  F. Cappello,et al.  On the Elastic Behavior of a Cross-Ply Composite Pin-Joint with Clearance Fits , 1999 .

[4]  Robert E. Rowlands,et al.  Single- and multiple-bolted joints in orthotropic materials , 1982 .

[5]  T. S. Ramamurthy.  New studies on the effect of bearing loads in lugs with clearance fit pins , 1989 .

[6]  Fan Weixun,et al.  Load distribution of multi-fastener laminated composite joints , 1993 .

[7]  Fabrice Pierron,et al.  A Numerical and Experimental Study of Woven Composite Pin-Joints , 2000 .

[8]  Michael A. McCarthy.  BOJCAS: Bolted joints in composite aircraft structures , 2001 .

[9]  S. Kim,et al.  Finite element analysis of laminated composite plates with multi-pin joints considering friction , 1995 .

[10]  Byung Man Kwak,et al.  Contact analysis of mechanically fastened joints in composite laminates by linear complementarity problem formulation , 1997 .

[11]  C. Cooper,et al.  Effects of joint geometry and bolt torque on the structural performance of single bolt tension joints in pultruded GRP sheet material , 1995 .

[12]  D. E. Cooper,et al.  The Effects of Pin Elasticity, Clearance, and Friction on the Stresses in a Pin-Loaded Orthotropic Plate , 1987 .

[13]  Erdogan Madenci,et al.  Bolted double-lap composite joints under mechanical and thermal loading , 2001 .

[14]  M. A. McCarthy,et al.  Finite element analysis of effects of clearance on single shear composite bolted joints , 2003 .

[15]  M. A. McCarthy,et al.  Bolt-hole clearance effects and strength criteria in single-bolt, single-lap, composite bolted joints , 2002 .

[16]  John H. Crews,et al.  Stress analysis method for a clearance-fit bolt under bearing loads , 1986 .

[17]  Wen-Hwa Chen,et al.  Three-dimensional contact stress analysis of a composite laminate with bolted joint , 1995 .

[18]  Tomas Ireman,et al.  Three-dimensional stress analysis of bolted single-lap composite joints , 1998 .

[19]  J. Schön,et al.  Fatigue resistance of composite joints with countersunk composite and metal fasteners , 2002 .