VDMOS electrical parameters potentially usable as mechanical state indicators for power VDMOS assemblies

Power device reliability is a multidisciplinary domain. It requires design and integration of sensors, implementation of signal processing algorithms that allow processing the different data provided by the different sensors in order to predict by statistical means the device failure occurrence and consequently anticipate the power device replacement. Currently, for device ageing studies in a laboratory, electrical measurements of device parameters are often used as an indicator of device ageing. Furthermore, smart metal-oxide semi-conductor technology integrates more and more sensors that permit to measure quantities such as on-state resistance or junction temperature of the device. In power vertical diffused metal oxide semiconductor (VDMOS) assemblies, it would be interesting to make use of the VDMOS electrical parameters deviations in order to monitor the ageing state of the power assembly. To that end, we carry-out in this paper a study mainly based upon electro-thermo-mechanical simulations in order to identify the power VDMOS electrical parameters that could be monitored in order to access to the mechanical state of the power assembly and therefore anticipate the assembly failure. The power VDMOS R on as well as zero temperature coefficient (ZTC) point are of interest because they are sensitive to mechanical stress. Consequently, in this paper, a procedure to minimise temperature impact on the Ron of the VDMOS transistor such that one could use the Ron as mechanical state indicator is shown. Another solution that makes use of a specific operating point of VDMOS (ZTC) which is temperature independent is also studied by simulations and experiment.

[1]  I. Filanovsky,et al.  Mutual compensation of mobility and threshold voltage temperature effects with applications in CMOS circuits , 2001 .

[2]  Mauro Ciappa,et al.  Selected failure mechanisms of modern power modules , 2002, Microelectron. Reliab..

[3]  S. Uhlig,et al.  Strain sensitive Pt–SiO2 nano-cermet thin films for high temperature pressure and force sensors , 2014 .

[4]  Rui Kang,et al.  Precursor parameter identification for power supply prognostics and health management , 2009, 2009 8th International Conference on Reliability, Maintainability and Safety.

[5]  Andreas Peter Friedrich.  Silicon piezo-tunneling strain sensor , 1999 .

[6]  F. S. Shoucair.  Analytical and experimental methods for zero-temperature-coefficient biasing of MOS transistors , 1989 .

[7]  Wolfgang Fichtner,et al.  A study of the threshold-voltage suitability as an application-related reliability indicator for planar-gate non-punch-through IGBTs , 2007, Microelectron. Reliab..

[8]  R.C. Jaeger,et al.  Silicon piezoresistive stress sensors and their application in electronic packaging , 2001, IEEE Sensors Journal.

[9]  C. Renner,et al.  Giant room-temperature piezoresistance in a metal-silicon hybrid structure. , 2008, Physical review letters.

[10]  T. Martire,et al.  On-line [TJ, Vce] monitoring of IGBTs stressed by fast power cycling tests , 2013, 2013 15th European Conference on Power Electronics and Applications (EPE).

[11]  Laleh Najafizadeh,et al.  Zeroing in on a zero-temperature coefficient point , 2002, The 2002 45th Midwest Symposium on Circuits and Systems, 2002. MWSCAS-2002..

[12]  Y. Kanda,et al.  A graphical representation of the piezoresistance coefficients in silicon , 1982, IEEE Transactions on Electron Devices.

[13]  Mounira Berkani,et al.  Ageing and Failure Modes of IGBT Modules in High-Temperature Power Cycling , 2011, IEEE Transactions on Industrial Electronics.

[14]  M. Usui,et al.  Mechanical stress dependence of power device electrical characteristics , 2006, 2006 IEEE International Symposium on Power Semiconductor Devices and IC's.

[15]  G.C.M. Meijer,et al.  Temperature sensors and voltage references implemented in CMOS technology , 2001, IEEE Sensors Journal.

[16]  S. Selberherr,et al.  The Effect of General Strain on the Band Structure and Electron Mobility of Silicon , 2007, IEEE Transactions on Electron Devices.

[17]  Masoud Pourali,et al.  A Functional Sensor Placement Optimization Method for Power Systems Health Monitoring , 2013 .

[18]  D. Kwong,et al.  Application of Piezoresistive Stress Sensor in Wafer Bumping and Drop Impact Test of Embedded Ultrathin Device , 2012, IEEE Transactions on Components, Packaging and Manufacturing Technology.