Adaptive neuro-fuzzy inference approach for prediction the stiffness modulus on asphalt concrete

In this study, stiffness modulus parameters of asphalt concrete were determined experimentally for different temperature and exposure times. The stiffness modules were calculated according to Nijboer stiffness module. Basic physical properties and the quantity of bitumen of asphalt core samples were designated for determining the stiffness modules. The samples were exposed to 17^oC (reference temperature), 30, 40 and 50^oC temperatures for 1.5, 3, 4.5 and 6h respectively and then Marhall Stability tests were done for each samples. By using the test results a prediction model with Sugeno type based on the adaptive neuron-fuzzy inference system (ANFIS) was alternatively developed to predict the stiffness modules of asphalt core samples. As a result, it was seen that the developed prediction model could be used as a prediction model for unperformed situations which are not suitable for experiments.

[1]  Harun Tanyildizi,et al.  BİTÜMLÜ SICAK KARIŞIMLARIN RİJİTLİĞİNİN BULANIK MANTIK İLE BULUNMASI , 2006 .

[2]  Charles F Parker EFFECT OF MIX TEMPERATURE , 1960 .

[3]  B. Kök,et al.  The effects of using lime and styrene-butadiene-styrene on moisture sensitivity resistance of hot mix asphalt , 2009 .

[4]  Ulf Isacsson,et al.  Rheological effects of commercial waxes and polyphosphoric acid in bitumen 160/220 – high and medium temperature performance , 2007 .

[5]  E. Mizutani,et al.  Neuro-Fuzzy and Soft Computing-A Computational Approach to Learning and Machine Intelligence [Book Review] , 1997, IEEE Transactions on Automatic Control.

[6]  Y. Lefeuvre Asphalt material fatigue test under cyclic loading: the lengthening of samples as a way to characterize the material damage - Experiments and modelling , 2003 .

[7]  Ercan Özgan,et al.  Fuzzy logic and statistical-based modelling of the Marshall Stability of asphalt concrete under varying temperatures and exposure times , 2009, Adv. Eng. Softw..

[8]  Baha Vural Kök,et al.  The Effects of Different Binders on Mechanical Properties of Hot Mix Asphalt , 2007 .

[9]  Jay N. Meegoda,et al.  Micromechanical Model for Temperature Effects of Hot-Mix Asphalt Concrete , 1999 .

[10]  Ercan Özgan Determining the Stability of Asphalt Concrete at Varying Temperatures and Exposure Times Using Destructive and Non-Destructive Methods , 2007 .

[11]  Graham C Hurley,et al.  Evaluation of Potential Processes for Use in Warm Mix Asphalt (With Discussion) , 2006 .

[12]  Chien Chung Huang,et al.  Experimental and theoretical characterization of the engineering behavior of bitumen mixed with mineral filler , 2008 .

[13]  Burak Sengoz,et al.  Evaluation of steel slag coarse aggregate in hot mix asphalt concrete. , 2009, Journal of hazardous materials.