Analysis of PWM frequency control to improve the lifetime of PWM inverter

Studies have shown that the power cycling Mean Time to Failure (MTTF) of the IGBT bond wire in an adjustable speed drive (ASD) may be very short under some very common conditions. This paper proposes a switching frequency reduction method based on junction temperature variation (ΔTj) of the inverter IGBT. It has the following advantages. Firstly, it only reduces the PWM frequency under low speed higher torque condition; secondly, the inverter can be started more smoothly and safely under higher command switching frequency and high torque condition. Thirdly, the overall MTTF of the inverter IGBT can be improved dramatically. Theory analysis, simulation and experimental result will be provided to show these advantages.

[1]  H. Reichl,et al.  Lifetime Estimation for Wire Bond Interconnections using Life-Cycle-Information Modules with Implemented Models , 2005, 2005 4th International Symposium on Environmentally Conscious Design and Inverse Manufacturing.

[2]  Wolfgang Fichtner,et al.  Lifetime prediction and design of reliability tests for high-power devices in automotive applications , 2003 .

[3]  Wolfgang Fichtner,et al.  Lifetime prediction of IGBT modules for traction applications , 2000, 2000 IEEE International Reliability Physics Symposium Proceedings. 38th Annual (Cat. No.00CH37059).

[4]  A. Dasgupta,et al.  Failure mechanism models for cyclic fatigue , 1993 .

[5]  Lixiang Wei,et al.  Evaluation of Power Semiconductors Power Cycling Capabilities for Adjustable Speed Drive , 2008, 2008 IEEE Industry Applications Society Annual Meeting.

[6]  V. Blasko,et al.  On line thermal model and thermal management strategy of a three phase voltage source inverter , 1999, Conference Record of the 1999 IEEE Industry Applications Conference. Thirty-Forth IAS Annual Meeting (Cat. No.99CH36370).

[7]  Ahmet M. Hava,et al.  Simple Analytical and Graphical Methods for Carrier-Based PWM-VSI Drives , 1999 .

[8]  G. Nicoletti,et al.  Fast power cycling test of IGBT modules in traction application , 1997, Proceedings of Second International Conference on Power Electronics and Drive Systems.

[9]  Lixiang Wei,et al.  Junction Temperature Prediction of a Multiple-chip IGBT Module under DC Condition , 2006, Conference Record of the 2006 IEEE Industry Applications Conference Forty-First IAS Annual Meeting.