Microfeeding with different ultrasonic nozzle designs.

Microfeeding of dry powder excited by ultrasonic vibration makes use of relatively simple equipment and can be applied to solid freeforming and pharmaceutical dosing. The nozzle was a vertical glass capillary and four configurations for ultrasonic actuation were investigated: Type I had a piezoelectric transducer ring bonded to the base of a cylindrical water-containing vessel containing an axial nozzle; Type II had a piezoelectric transducer ring attached to the sidewall of the vessel; Type III used direct mechanical connection to the glass wall of the capillary to give nominally longitudinal vibration; and Type IV also used direct connection to the glass tube but arranged to give progressive wave vibration. The experimental results show that all four configurations realized powder microfeeding and dosing but the characteristics, in terms of minimum flow rate, dependence on voltage amplitude and uniformity of dose varied considerably. The discharge of particles was observed by a high-speed camera.

[1]  Aniruddha B. Pandit,et al.  Mapping of sonochemical reactors: Review, analysis, and experimental verification , 2002 .

[2]  Shuji Matsusaka,et al.  Micro-feeding of fine powders using a capillary tube with ultrasonic vibration , 1995 .

[3]  John Evans,et al.  Studies on ultrasonic microfeeding of fine powders , 2006 .

[4]  P. Coveney,et al.  Combinatorial searches of inorganic materials using the ink-jet printer: science, philosophy and technology , 2001 .

[5]  Sawyer B. Fuller,et al.  Ink-jet printed nanoparticle microelectromechanical systems , 2002 .

[6]  Xiaochun Li,et al.  Experimental and analytical study of ultrasonic micro powder feeding , 2003 .

[7]  Hongseok Choi,et al.  Micro rapid prototyping system for micro components , 2002 .

[8]  Jung Ho Kim,et al.  Vibroacoustic characteristics of ultrasonic cleaners , 1999 .

[9]  Jörg Wallaschek,et al.  A system for powder transport based on piezoelectrically excited ultrasonic progressive waves , 2005 .

[10]  T. K. Tseng,et al.  High-frequency, silicon-based ultrasonic nozzles using multiple Fourier horns , 2004, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[11]  Takehiro Takano,et al.  Excitation of a progressive wave in a lossy ultrasonic transmission line and an application to a powder-feeding device , 1998 .

[12]  D. Schwartz,et al.  Electrochemical printing: software reconfigurable electrochemical microfabrication , 2005 .

[13]  John Evans,et al.  A dry powder jet printer for dispensing and combinatorial research , 2004 .

[14]  T. Miyajima,et al.  Particle Discharge Characteristics from the Nozzle of a Thin Tube Immersed in Liquid Subjected to Ultrasonic Wave Force [Translated] † , 2003 .

[15]  CHANGING THE PROPAGATION DIRECTION OF FLEXURAL ULTRASONIC PROGRESSIVE WAVES BY MODULATING EXCITATION FREQUENCY , 2000 .

[16]  Fan Zhang,et al.  Bidirectional linear ultrasonic motor using longitudinal vibrating transducers , 2005, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.