Analysis and optimization of a novel brushless compound-structure permanent-magnet synchronous machine

A novel brushless compound-structure permanent-magnet synchronous machine (CS-PMSM) is proposed in this paper. The structural characteristics are described and the operation principle is introduced. The equivalent magnetic circuit of the BDRM is established, and the electromagnetic torque is deduced by analytical method. The new type of brushless CS-PMSM consists of one stator machine (SM) and one brushless double rotor machine (BDRM). Using 3D finite element method (FEM), a BDRM prototype is designed and evaluated. Some characteristics including air gap flux density, no-load flux linkage, back-EMF, and torque behavior are obtained.

[1]  Longya Xu,et al.  Design and Evaluation of a Dual Mechanical Port Machine and System , 2006, 2006 CES/IEEE 5th International Power Electronics and Motion Control Conference.

[2]  C. Sadarangani,et al.  Investigation of the winding current distribution in a 4-quadrant-transducer prototype machine , 2005, IEEE Transactions on Magnetics.

[3]  Fengge Zhang,et al.  Study and design of 3-D flux permanent magnet claw-pole motor with SMC stator , 2009, 2009 International Conference on Applied Superconductivity and Electromagnetic Devices.

[4]  Hui Zhao,et al.  Investigation of a compound-structure permanent-magnet synchronous machine used for HEVs , 2008, 2008 IEEE Vehicle Power and Propulsion Conference.

[5]  Ping Zheng,et al.  Compound-structure permanent-magnet synchronous machine used for HEVs , 2008, 2008 International Conference on Electrical Machines and Systems.

[6]  Ping Zheng,et al.  Influence of saturation and saliency on the inductance of a four-quadrant transducer prototype machine , 2006, IEEE Transactions on Magnetics.

[7]  C. Sadarangani,et al.  A four-quadrant HEV drive system , 2002, Proceedings IEEE 56th Vehicular Technology Conference.

[8]  Fan Tao,et al.  A brushless Permanent Magnet Dual Mechanical Port Machine for hybrid electric vehicle application , 2008, 2008 International Conference on Electrical Machines and Systems.

[9]  Jianguo Zhu,et al.  Core losses in claw pole permanent magnet machines with soft magnetic composite stators , 2003 .

[11]  P. Viarouge,et al.  New structures of polyphase claw-pole machines , 2002, Conference Record of the 2002 IEEE Industry Applications Conference. 37th IAS Annual Meeting (Cat. No.02CH37344).

[12]  Jianguo Zhu,et al.  Development of a claw pole permanent magnet motor with a molded low-density soft magnetic composite stator core , 2009, 2009 IEEE Energy Conversion Congress and Exposition.

[13]  Florin Jurca,et al.  Comparative analysis of the claw-pole rotor dimensions influence on the performances of a claw -pole generator for wind applications , 2009, 2009 International Conference on Clean Electrical Power.