Conformal Hybrid Solar and Electromagnetic (EM) Energy Harvesting Rectenna

This paper presents the design of a cost effective, hybrid energy harvesting circuit combining a solar cell and a rectenna capable to harvest ambient electromagnetic energy. Electromagnetic analysis is used to model and optimize the designed circuits in order to allow the antenna and solar cell to share the same area leading to a compact structure. Nonlinear harmonic balance optimization is used to maximize the RF-to-DC conversion efficiency of the rectenna circuitry in the presence of the solar cell and both wideband and multiband topologies are presented. Furthermore, a low cost and flexible polyethylene terephthalate PET substrate and a flexible amorphous silicon solar cell are chosen, providing for both a low cost and conformal structure. A prototype able to generate a maximum DC power of 56 mW when the solar cell is illuminated with 100 mW/cm2 solar irradiance, and a dual band rectenna demonstrating an efficiency of 15% around 850 MHz and 1850 MHz when illuminated by a microwave signal of available power is presented.

[1]  M. Zawadzki,et al.  Integrated RF antenna and solar array for spacecraft application , 2000, Proceedings 2000 IEEE International Conference on Phased Array Systems and Technology (Cat. No.00TH8510).

[2]  S. Upson.  Update: Putting wireless power to work smart sensors harvest , 2008, IEEE Spectrum.

[3]  Chi-Ying Tsui,et al.  Analysis and Design Strategy of UHF Micro-Power CMOS Rectifiers for Micro-Sensor and RFID Applications , 2007, IEEE Transactions on Circuits and Systems I: Regular Papers.

[4]  Roger F. Harrington,et al.  Modal analysis of loaded N-port scatterers , 1972 .

[5]  R. Zane,et al.  Resistor Emulation Approach to Low-Power RF Energy Harvesting , 2008, IEEE Transactions on Power Electronics.

[6]  William C. Brown,et al.  The History of Power Transmission by Radio Waves , 1984 .

[7]  R. Collin.  Antennas and Radiowave Propagation , 1985 .

[8]  Apostolos Georgiadis,et al.  Flexible hybrid solar/EM energy harvester for autonomous sensors , 2011, 2011 IEEE MTT-S International Microwave Symposium.

[9]  R. Zane,et al.  Recycling ambient microwave energy with broad-band rectenna arrays , 2004, IEEE Transactions on Microwave Theory and Techniques.

[10]  K. Araki,et al.  Microstrip antenna with solar cells for microsatellites , 1994, Proceedings of IEEE Antennas and Propagation Society International Symposium and URSI National Radio Science Meeting.

[11]  V. Lakafosis,et al.  Paper-Based RFID-Enabled Wireless Platforms for Sensing Applications , 2009, IEEE Transactions on Microwave Theory and Techniques.

[12]  John R. Long,et al.  Photovoltaic Antennas for Autonomous Wireless Systems , 2011, IEEE Transactions on Circuits and Systems II: Express Briefs.

[13]  Yoshihiro Kawahara,et al.  Feasibility and potential application of power scavenging from environmental RF signals , 2009, 2009 IEEE Antennas and Propagation Society International Symposium.

[14]  P. Maagt,et al.  Two advanced solar antenna "SOLANT" designs for satellite and terrestrial communications , 2003 .

[15]  H. Rogier,et al.  Wearable aperture-coupled shorted solar patch antenna for remote tracking and monitoring applications , 2011, Proceedings of the 5th European Conference on Antennas and Propagation (EUCAP).

[16]  J.A.C. Theeuwes,et al.  Ambient RF Energy Scavenging: GSM and WLAN Power Density Measurements , 2008, 2008 38th European Microwave Conference.

[17]  Cesare Alippi,et al.  An Adaptive System for Optimal Solar Energy Harvesting in Wireless Sensor Network Nodes , 2008, IEEE Transactions on Circuits and Systems I: Regular Papers.

[18]  M. Green.  Third generation photovoltaics : advanced solar energy conversion , 2006 .

[19]  François Krummenacher,et al.  A model for /spl mu/-power rectifier analysis and design , 2005, IEEE Transactions on Circuits and Systems I: Regular Papers.

[20]  Martin A. Green,et al.  Solar cell efficiency tables (Version 38) , 2011 .

[21]  A. Shah,et al.  Thin‐film silicon solar cell technology , 2004 .

[22]  A. Collado,et al.  Rectenna design and optimization using reciprocity theory and harmonic balance analysis for electromagnetic (EM) energy harvesting , 2010, IEEE Antennas and Wireless Propagation Letters.

[23]  Luca Benini,et al.  Design of a Solar-Harvesting Circuit for Batteryless Embedded Systems , 2009, IEEE Transactions on Circuits and Systems I: Regular Papers.

[24]  Alessandra Costanzo,et al.  Co-design of ultra-low power RF/Microwave receivers and converters for RFID and energy harvesting applications , 2010, 2010 IEEE MTT-S International Microwave Symposium.