A homogenization approach for assessing the yield strength properties of stone column reinforced soils

The macroscopic strength properties of a purely cohesive soil reinforced by a periodic distribution of “stone columns” made of a highly frictional granular material are investigated in a rigorous way on the basis of the yield design homogenization approach. Starting from a first crude lower bound approximation to the macroscopic strength criterion of the stone column reinforced soil, a much more accurate failure surface is then drawn in the space of stresses as a result of a series of numerical elastoplastic simulations performed on the reinforced soil unit cell subject to radial strain controlled loading paths. The anisotropic characteristics of the so obtained original criterion are then highlighted by means of its representation in the Mohr plane attached to any oriented facet. The paper concludes with a first illustrative implementation of the method on the derivation of an upper bound estimate for the ultimate bearing capacity of a stone column reinforced foundation.

[1]  P. V. McLaughlin,et al.  Plastic limit behavior and failure of filament reinforced materials , 1972 .

[2]  J. Pastor,et al.  Lower and upper numerical bounds to the off-axis strength of unidirectional fiber-reinforced composites by limit analysis methods , 1997 .

[3]  P. de Buhan,et al.  Stability analysis of an embankment resting upon a column-reinforced soil , 2011 .

[4]  P. de Buhan,et al.  A homogenization method for estimating the bearing capacity of soils reinforced by columns , 2005 .

[5]  Roberto Nova,et al.  A constitutive model for soil reinforced by continuous threads , 1992 .

[6]  Jean Salençon,et al.  Introduction to the yield design theory and its applications to soil mechanics , 1990 .

[7]  E. Sanchez-Palencia,et al.  Homogenization Techniques for Composite Media , 1987 .

[8]  A. Taliercio.  Generalized plane strain finite element model for the analysis of elastoplastic composites , 2005 .

[9]  Andrzej Sawicki,et al.  Plastic Limit Behavior of Reinforced Earth , 1983 .

[10]  P. de Buhan,et al.  A homogenization approach to the yield strength of composite materials , 1991 .

[11]  Radoslaw L. Michalowski,et al.  CONTINUUM VERSUS STRUCTURAL APPROACH TO STABILITY OF REINFORCED SOIL , 1995 .

[12]  Radoslaw L. Michalowski,et al.  Stability of Uniformly Reinforced Slopes , 1997 .

[13]  J. J. Lim,et al.  Homogenization framework for three‐dimensional elastoplastic finite element analysis of a grouted pipe‐roofing reinforcement method for tunnelling , 2005 .

[14]  P. de Buhan,et al.  Calculation of the critical height of a homogenized reinforced soil wall: A numerical approach , 1994 .

[15]  I. Ahmadi,et al.  A generalized plane strain meshless local Petrov–Galerkin method for the micromechanics of thermomechanical loading of composites , 2010 .

[16]  Patrick de Buhan,et al.  An elastoplastic homogenization procedure for predicting the settlement of a foundation on a soil reinforced by columns , 2007 .

[17]  Guido Pellegrini,et al.  Yield design of reinforced earth walls by a homogenization method , 1989 .

[18]  Mounir Bouassida,et al.  A homogenization approach to estimate the ultimate bearing capacity of a stone column reinforced foundation , 2007 .

[19]  Andrzej Sawicki,et al.  LIMIT ANALYSIS OF COHESIVE SLOPES REINFORCED WITH GEOTEXTILES , 1989 .

[20]  S. Majumdar,et al.  Effects of phase geometry and volume fraction on the plane stress limit analysis of a unidirectional fiber-reinforced composite☆ , 1975 .